MG Polyplast Industries Pvt. Ltd. Neemrana, Alwar, Rajasthan

We offer the PS Mirror Sheet to our client. Primarily intended for areas such as interior fittings, garden, display, point-of-sale, visual merchandising and store design, PS Mirror sheets are half the weight of glass. Our wide range of such mirror sheets is of the highest commercial quality available and that offers strength more than 17 times greater than glass. They are manufactured with toughest protective back-coating to protect the mirror from scratches. It should be noted that these PS Mirror do not have the rigidity of glass. Visual distortion may occur during normal use which is an inherent characteristic of the material. Like a magnifying glass it can intensify and concentrate sun rays. Therefore, it should not be positioned in areas of direct sunlight. Half the weight of glass, shatter resistant, extensive design, flexible, break-resistance and pressure sensitive backing are some of the characteristic of PS Mirror sheets.

PC LITE polycarbonate ventilator Base plate an outstanding roofing material that offers superior physical properties. PC LITE polycarbonate ventilator Base plate is favored by professionals for air turbo ventilator, PC LITE polycarbonate ventilator Base plate high light transmission and unlimited range of profiles like AC, TATA JINDAL, BHUSHAN, NATIONAL, HINDALCO, etc.  allow it to integrate as a high quality roof light into any roofing profile.  i) Neck / Dia 24" & 21" Daimeter also as per customize requirement. ii) It gives more the life than FRP iii) Virtually Unbreakable. iv) Light Transmission -PC Lite Base plate light transmission UP to 85%

Thickness : 2MM

Packaging Type : clear

U Lcck Polycarbonate profile is designed to seal the edge of the polycarbonate sheets. Applied after the solid/vented aluminum tape it close the edge to prevent dust, water and bug get access to the hollow space. It also provide a a clear finish to the edge of the sheet. It can be easily cutted The profile can be easily cutted In order to prevent dust and dirt penetrating inside the ribs, the exposed top and bottom ends (the width side of a sheet) must always be sealed first with the solid aluminum tape on the top and vent tape at the bottom.   1) Light weight 2) Keep consistent with the PC sheet in physical performance 3) Good waterproof performance 4) Good weather resistance and UV protection 5) Simply installed

PC Profiles used as connectors between pc sheets and edge sealing. It not only make the installation fast and convenience, but also can effectively prevent the sheet broken when make holes in the sheet. Using the PC connectors also can make the waterproof dealing more simple and easier.

Polycarbonate Accessories that we manufacture, export and supply are extensively in demand amongst buyers. We make use of superior grade raw materials for the manufacturing of our Polycarbonate Accessories. Our PC Profiles are widely used as connectors between PC sheets and edge sealing. These make the installation fast and convenient. Moreover, there are minimal chances of cracking while making holes. Waterproof dealing can be simple and easier with our PC connectors or Polycarbonate Accessories.   Product Features : Light weight Keep consistent with the PC sheet in physical performance Good waterproof performance Good weather resistance and UV protection Simply installed

Packaging Type : Multicolor

Material : Polycarbonate

Number Of Flower : Accessories

Application : Connectors Between PC Sheets, Edge Sealing, Waterproof Dealing

Feature : Light Weight,Consistent With PC Sheet In Physical Performance,Good Waterproof Performance,Good Weather Resistance And UV Protection,Simply Installed

Multiwall Polycarbonate Sheets that we manufacture, export and supply are extensively in demand across the globe. Our Multiwall Polycarbonate Sheets are accredited for their impressive attribute of providing insulation against heat and cold. PC Lite is the brand name for MG Multiwall Polycarbonate Sheets. We make available our Multiwall Polycarbonate Sheets in diverse specifications and at affordable rates. Also, we offer tailored lengths in order to minimize the wastage of sheets.   Highlights : A lot can be saved on energy cost by using these sheets on windows, walkway or overhead bridge. Besides, they are ideal for solar reflectivity and roofing for hot climate. PC Lite Multiwall Sheets can also be used in canopies, shopping malls, car parkings and walkways. These sheets are easy to handle and install, virtually unbreakable and can resist extreme weather conditions. PC Lite is designed to resist impact and are far better than conventional glass and other acrylic material. PC Lite is a light, strong, insulating and attractive sheet for use as roofing, cladding, glazing and other applications in construction, advertising, agriculture, industry and DIY. PC Lite has a long working life and carries a 10 year warranty against yellowing. Some of the major properties of multi wall polycarbonate sheet include unbreakable, superior impact strength, 90% light transmission, self-extinguishing and TAC approved, light in weight and easy to install. Characterstics : High impact resistance Weather resistant High heat and sound insulation Long life span Excellent light transmission up to 88 % (10 mm) Large dimensions Excellent resistance to chemicals Transparent UV protection- Co-Extruded 1 Side & 2 Sides 10 Year Warranty Limited Temperature resistant- between -40°C +130°C High resistance to mechanical loading Light-weight Easy to install using ordinary tools Superb thermal insulation – saves energy   Applications : Architectural roofing and glazing Commercial and retail roofing Sport facilities – translucent roofing Covered walkways, awnings and entrances Open markets – light roofing Service stations – translucent roofing Parking structure covering Swimming pool covers Product Range : Standard Colors - Clear, Bronze, Opal, Lake Blue and Green. Standard widths - 1220mm – 2100 mm Standard lengths - 2400mmm, 5800mm & 11800mm Available thicknesses - 4-6-8-10-16 mm< Special thicknesses, Colours and Lengths can be produced to special order, subject to special conditions. Installation of PC Lite Multiwall Sheets : When used for roofing it is crucial that the roof has a minimum slope of 2.5°. When using glazing bars and covering trims, mechanical fixings are not required, though strongly recommend in areas with high wind speeds. DRILLING - Use only new or sharply ground steel or carbide tipped drills. All holes must be drilled at least 40mm from the edge of sheet.   Pre-Installation Sealing : After cutting and cleaning the sheet, tape off the top of the panel with a non-vented tape and the bottom with a vented tape, to prevent contaminants and moisture entering the flutes. Usually a finishing trim in the style of a ‘U’ profile is used to cover the vented tape. Do not remove the protective tape before cutting or installation.

Size : 10x5feet, 12x6feet

Material : Polycarbonate

Thickness : 10-15mm, 15-20mm

Application : Roofing, Shedding

Pattern : Plain

Condition : New

Feature : Best Quality, Heat Resistant

We are presenting a vast collection of Designer Polystyrene Sheet. These sheets are made-up using high quality grade raw material and in agreement with worldwide standards and norms. These are available in various specifications in different sizes and width based on the requirement of the client. These products are quality checked by skilled team of professionals on various quality constraints. These are available at cost effective prices. Features: Excellent transparency Good surface hardness Low water absorption specifications: Thickness : 1 mm to 4 mm Width : 1.22 mtr Length : 2.44 mtr Colors : Clear and more

Material : Polystyrene

Number Of Flower : Designer Sheet

Packaging Type : Clear

Thickness : 1 Mm To 4 Mm

Width : 1.22 Mtr

Length : 2.44 Mtr

Feature : Excellent Transparency,Good Surface Hardness,Low Water Absorption

MG Acryl flat extruded acrylic sheet offers light transmission that surpasses glass, but at only half the weight of glass. Inherently UV resistant, MG Acryl is an excellent choice for both indoor and outdoor applications. Our Extruded Acrylic Sheets have higher capability of strength to weight ration and are unaffected by moisture and chemicals. Extruded Acrylic Sheets also offer high light transmittance and are better replacement of glass as they are sturdy and stronger. Extruded Acrylic Sheets can be heat-formed without loss of optical clarity and can be cut, routed, polished, bent and formed. Its high clarity and formability offer designers a world of options, from small fabricated items and displays, to signs, railings, and more. Features: Up to 92% light transmission Inherently UV resistant Stronger than glass and less than half its weight High gloss appearance Easily formed and fabricated Good chemical resistance Good thermal insulation Easy to recycle Applications: Construction components: light domes, partition walls, doorglazing, roofing, skylights for caravans Lighting: lighting control lenses, domestic light fittings. Engineering components: machine housings, machine safety covers. Advertising and signage: moulded letters, store displays, shop fittings, illuminated graphics panels. Other applications: containers, lettering templates, sound barrier walls. Product Range: MG Acryl is available in Transparent, Opal and Opaque Features. Colours: Clear, White, Glossy Black, Smoke, Red, Blue etc. Standard Thickness is from 1.5 mm to 20 mm. Standard sheet dimensions are 1220 x 2400 mm, 1220 x 1830 mm & 3050 x 2050 mm, Special thicknesses, colours and sizes can be produced to special order, subject to special conditions.

Material : Acrylic

Number Of Flower : Flat Extruded

Availability : Half Of Glass

The company is the trusted Manufacturer, Exporter & Supplier of durable and high quality Extruded Acrylic Sheets. Made from superior grade acrylic material, our sheets are light in weight and durable in comparison to glass. Our MG Acryl flat extruded acrylic sheet provides light transmission that surpasses glass. It is also UV resistant and ideal for both indoor and outdoor applications. Highlights :  Our sheets have higher capability of strength to weight ration and are unaffected by moisture and chemicals. They also offer high light transmittance and are better replacement of glass as they are sturdy and stronger. They can be heat-formed without loss of optical clarity and can be cut, routed, polished, bent and formed. Its high clarity and formability offer designers a world of options, from small fabricated items and displays, to signs, railings, and more.   Features : Up to 92% light transmission Inherently UV resistant Stronger than glass and less than half its weight High gloss appearance Easily formed and fabricated Good chemical resistance Good thermal insulation Easy to recycle Applications : Construction components: light domes, partition walls, doorglazing, roofing, skylights for caravans Lighting: lighting control lenses, domestic light fittings. Engineering components: machine housings, machine safety covers. Advertising and signage: moulded letters, store displays, shop fittings, illuminated graphics panels. Other applications: containers, lettering templates, sound barrier walls. Product Range : MG Acryl is available in Transparent, Opal and Opaque Features. Colours - Clear, White, Glossy Black, Smoke, Red, Blue etc. Standard Thickness is from 1.5mm to 20 mm. Standard Sizes - 1mtr x 2 mtr, 1.22mtr x 1.83mtr, 1.22mtr x 2.44mtr & 2mtr x 3mtr

Material : Acrylic

Number Of Flower : Flat Sheet

Thickness : 1.5mm - 20mm

Size : 1m X 2m,1.22m X 1.83m,1.22m X 2.44m,2m X 3m

Purity : Up To 92% Light Transmission,UV Resistant,Stronger Than Glass,Lightweight,High Gloss Appearance,Chemical Resistant,Thermally Insulating,Recyclable

Applications : Construction Components,Lighting,Engineering Components

Application : Indoor And Outdoor Applications

MG Acryl flat extruded acrylic sheet offers light transmission that surpasses glass, but at only half the weight of glass. Inherently UV resistant, MG Acryl is an excellent choice for both indoor and outdoor applications. Our Extruded Acrylic Sheets have higher capability of strength to weight ration and are unaffected by moisture and chemicals. Extruded Acrylic Sheets also offer high light transmittance and are better replacement of glass as they are sturdy and stronger. Extruded Acrylic Sheets can be heat-formed without loss of optical clarity and can be cut, routed, polished, bent and formed. Its high clarity and formability offer designers a world of options, from small fabricated items and displays, to signs, railings, and more. Features: Up to 92% light transmission Inherently UV resistant Stronger than glass and less than half its weight High gloss appearance Easily formed and fabricated Good chemical resistance Good thermal insulation Easy to recycle Applications: Construction components: light domes, partition walls, doorglazing, roofing, skylights for caravans Lighting: lighting control lenses, domestic light fittings. Engineering components: machine housings, machine safety covers. Advertising and signage: moulded letters, store displays, shop fittings, illuminated graphics panels. Other applications: containers, lettering templates, sound barrier walls. Product Range: MG Acryl is available in Transparent, Opal and Opaque Features. Colours: Clear, White, Glossy Black, Smoke, Red, Blue etc. Standard Thickness is from 1.5 mm to 20 mm. Standard sheet dimensions are 1220 x 2400 mm, 1220 x 1830 mm & 3050 x 2050 mm, Special thicknesses, colours and sizes can be produced to special order, subject to special conditions.

Material : Acrylic

Number Of Flower : Extruded

Thickness : 1.5 Mm To 20 Mm

Availability : Half The Weight Of Glass

Appearance : High Gloss

Our wide range of high quality PC Lite Embossed Sheet can be used in various ways and for various applications such as for veranda glazing, safety or vandalized areas indoor/outdoor signs or instrument panels. They are exceptional impact strength and virtually unbreakable. Hence, it can be widely used in construction and decorations. Further, they are UV resistance, self-extinguishable and light transmittance. Such rolls and sheets come with tiny embossed patterns on one side. Such design not just enhances the look of the polycarbonate rolls and sheets but also enhances its firmness and anti-static function. Besides, they add special effect to the sheet. Features: High impact resistance Light weight Can be easy cold bend processed and hot molding Designs: Matt Finish/Frosted Ice Crush Drop Embossed Specification : Standard Colors – Clear, Bronze, Green & Blue Standard Thickness – 1.2 mm – 4 mm Standard Size (Roll) – 915,1220 mm x 20 & 30 mtr Rolls Standard Size (Sheets) – 1220 mm x 2440 mm Request Callback

Material : Polycarbonate

Application : Veranda Glazing, Safety Areas, Indoor/outdoor Signs, Instrument Panels, Construction, Decorations

Feature : High Impact Resistance,Light Weight,Easy Cold Bend Processed,Hot Molding

Thickness : 1.2 Mm - 4 Mm

Ours is the renowned name involved in the manufacturing, exporting and supplying of durable Embossed Polycarbonate Sheets. Owing to its attributes like high impact resistance and lightweight, our PC LITE Embossed Sheet can be easy cold bend processed and hot mold. These are widely used in construction and decoration applications. Our sheets are virtually unbreakable, UV resistant, self-extinguishable and known for light transmittance.Highlights : Our wide range of high quality polycarbonate embossed rolls and sheets can be used in various ways and for numerous applications such as for veranda glazing, safety or vandalized areas indoor/outdoor signs or instrument panels. Such rolls and sheets come with tiny embossed patterns on one side. Such design not just enhances the look of the polycarbonate rolls and sheets but also enhances its firmness and anti-static function. Besides, they add special effect to the sheet.   Designs : Matt Finish/Frosted Ice Crush Drop Embossed Standard Colors – Clear, Bronze, Green & Blue Standard Thickness – 1.2mm – 4mm Standard Size (Roll) – 915,1220 mm x 20 & 30mtr Rolls Standard Size (Sheets) – 1220mm x 2440mm

Material : Polycarbonate

Application : Roofing, Shedding

Pattern : Plain

Condition : New

Feature : Best Quality, Crack Proof, Durable, Easy To Install, Heat Resistant, Water Proof

We are offering very superior quality Designer Sheet in various decorative finishes for light reflectors in all industrial lighting products, for interiors & innovative designing. To be broadly used and approved, this offered product is offered in array of thickness, sizes and widths. Our valued clients can avail this product at reasonable price range. Our material for the products are sourced from some of the most reliable vendors in this industry. Features: Easy and fast fabrication No creep or damage No health hazards Request Callback

Number Of Flower : Designer Sheet

Material : Polystyrene

Usage : Light Reflectors In Industrial Lighting Products, Interiors & Innovative Designing

Packaging Type : Industrial Standard Packaging

Size : Standard

Purity : Easy And Fast Fabrication, No Creep Or Damage, No Health Hazards

Buyers can contact us for durable and affordable Compact Polycarbonate Sheets! These sheets are acknowledged for their high impact strength and high temperature resistance. Our MG PC Sheets are available with a brand name of PC Lite. PC Lite Sheets that we offer are clear & transparent, thus provide high level of glazing performance. Moreover, our sheets are available in standard thickness ranging from 1 mm to 12 mm.Highlights : These are designed to be used anywhere where transparency or tailored light transmission is required along with high impact strength. This versatile property of glazing makes our compact sheets an ideal choice for glazing in schools, hospitals, sporting arenas and any public infrastructure. These are available with UV (Ultra Violet) protection and can be available in FR (Fire Retardant) grade. These sheets possess special co-extruded UV protection that permits them to be used in outside applications in which they are exposed to UV light. Some of the major characteristics of our compact sheet include virtually unbreakable yet it is transparent as glass at less than half its weight, high resistance to weathering, easy to fabricate and install and low flammability. These sheets also have excellent insulation properties and are suitable for cutting, drilling, bending and thermoforming. PC Lite has a long working life and carries a 10 year warranty against yellowing. Right from building and construction to advertising, glazing to transport vehicles, industrial roofing to pool enclosures, walk-ways and patio covering to domes, canopies and carports, PC Lite Compact sheets have various applications. They are clear in color and are gradually replacing glass in various applications.   Product Range : PC Sheets Standard Thickness – 1.5mm to 15mm Standard Size – 1.22mtr x 2.44mtr, 2.1mtr x 6mtr & 2.1mtr x 12mtr Standard Colors – Clear, Bronze, Green & Blue PC Rolls Standard Thickness – 1.2mm to 2.8mm Standard Size – 3 ft – 7 ft Width x 20mtr & 30mtr Length Rolls Standard Colors – Clear, Bronze, Green & Blue PC Lite is available with or without a special UV-resistant coating Colours - Clear, Opal, Bronze, Green and Blue Standard thicknesses range from 1 to 15 mm. Features  : High clarity and light transmission High heat resistance Weather and UV resistant Excellent impact strength Thermoformable Intermediate Chemical Resistance Medium fire performance Reduce noise transmission Recyclable   Typical Applications : Skylights Architectural roofing Covered walkways Transparent acoustic barriers Light boxes and designed signage Shields and machine guards Fabricated items Office machinery (covers, sight panels) Industrial construction Partition walls Advertising panels Replacement glazing Sound barrier walls Greenhouses Conservatories Doors and windows Canopy roofs Barrel vaults

Material : Polycarbonate

Number Of Flower : Compact Sheet

Purity : High Clarity And Light Transmission,High Heat Resistance,Weather And UV Resistant

We are into the business of manufacturing, exporting and supplying a wide variety of Acrylic Mirror Sheets. These are widely used in areas like interior fittings, garden, display, point-of-sale, visual merchandising and various others. Our PS/Acrylic mirror sheets are light in weight in comparison to glass. Our sheets are manufactured with the toughest protective back-coating which protects mirror from scratches. Highlights : Our wide range of such mirror sheets is of the highest commercial quality available and that offers strength more than 17 times greater than glass. These acrylic mirrors do not have the rigidity of glass. Visual distortion may occur during normal use which is an inherent characteristic of the material. Like a magnifying glass it can intensify and concentrate sun rays. Therefore, it should not be positioned in areas of direct sunlight. Half the weight of glass, shatter resistant, extensive design, flexible, break-resistance and pressure sensitive backing are some of the characteristic of PS/Acrylic mirror sheets.   Known for : Half the weight of glass Good finishing Shatter resistant Extensive design Flexible Intricate shapes Safer than glass Break resistance Highly reflective material Vacuum metalized in a vacuum chamber Protected on the back by a durable scratch resistant coating Front surface is protected with either a clear polyethylene film or a paper masking Pressure sensitive backing Protected with a release liner Abrasion resistant front surface for that extra durable requirement Processed Through : Drilled Sanded Polished Machined Cold formed for curved shapes Heated for sharp line bends Applications : Plastic displays Plastic signs Plastic letters Decorative profiles Locker mirrors Shower mirrors Dental utensils, etc   Other Details : Standard Colors – Silver, Blue, Red, Green, Flourscent Green, Pink Standard Thickness – 1mm to 3mm Standard Size – 4’ x 3’, 6’ x 4’ & 8’ x 4’

Size : Large, Medium, Small

Thickness : 0.5-1mm, 1.5-2mm

Edge Type : Flat Edge