Heat Apparatus Dealers in Ambala (15 products available)

The apparatus comprises a thick brass calorimeter approximately 90x65 mm. diameter, a bung with steam inlet and outlet tubes, a felt cover, and a 1100 cm3 tinplate boiler with bung to take the steam tube which a connects to the calorimeter.    

• Weight: 10-20kg, 30-40kg
• Voltage: 110V, 220V
• Condition: New
• Power: 0-100W, 100-200W, 200-400W
• Driven Type: Electric
• Temperature Range: 0-5 Deg C, 10-20 Deg C, 5-10 Deg C
• Warranty: 5yrs
• Ambient: 0-180 Deg C 180-360 Deg C

The apparatus comprises a thick brass calorimeter approximately 90x65 mm. diameter, a bung with steam inlet and outlet tubes, a felt cover, and a 1100 cm3 tinplate boiler with bung to take the steam tube which a connects to the calorimeter.    

‘Naugra Export’, is one of the leading Heat Conductivity Apparatus manufacturers and suppliers based in Ambala Cant, Haryana. We offer premium quality Heat Conductivity Apparatus which is used in demonstrating the rate of heat conduction in five different metals. Construction :- The Heat Conductivity Apparatus kit offered by us consist of five metal rods which are 40 mm in length and 20 mm diameter, which are spaced on a brass disc and mounted on an insulated handle. Each rod has cavity at the end for holding paraffin. Main Components :- Five Metal RodsBrass discInsulated handle Materials of Construction :- CopperIronSteelBrassAluminum

Advanced technocracy inc. Is manufacturer, exporter & supplier of two phase heat transfer apparatus.

Metal box, 230 x 75 x 75 mm, with sliding glass front and two detachable glass chimneys, with one candle holder under left chimney. Supplied without candles. Spark in mm : 25, 50, 75, 100

• Voltage: 230 V AC
• Phase: Single Phase
• Frequency: 50 Hz
• Features: Precisely designed, Sturdiness , Long operational life
• Item Code: 1402
• Floor Area: 1 m X 0.5m X 0.5 m height

• Model: HTL0019

Critical Heat Flux Apparatus works as a demonstrative tool to present the method of pool boiling. Our flux apparatus has a test wire enclosed by water of persistent temperature. The surface temperature of the test wire is heated by passing current through it. Due to the temperature different temperatures in the surface and atmosphere, the difference in system are observed till it burns out.

For demonstrating the rate of heat conduction in five different metals. The kit consists of five metal rods, approximately 20mm in diameter and 40mm long equally spaced on a brass disc and mounted on an insulated handle. The rods are aluminium, brass, copper, iron and steel and each having a cavity at the end for holding paraffin.

The apparatus consists housing the test heater and heater coil for initial heating of water. This heating coil is directly connected to mains (Heater) and the Test Heater (Nichrome Wire) is connected also to mains via a dimmer stat and a voltmeter, to read the voltage. A micro controller based peak detector has been provided to measure the maximum current during the process. The heater wire can be viewed through a transparent window.

The apparatus has been designed to explain the basic principle of production of heat by rotating of vanes friction. It consists fixed vanes encased in a wooden case lined with felt.The box can slide freely on a wooden base and is fitted with thermometer clamping device.A rotating cast aluminium cylinder rotates freely on a cast metallic pedestal and to its axle rotating vanes is provided which converts the kinetic energy into heat energy and temperature of water in copper vessel rises after two to three minutes of rotation.Two pulleys are fitted on iron frame. Complete as described with cord.But without thermometer.The above apparatus is also provided with non-resetable zero revolution and shown in the diagram & with two set slotted weight and cord.

Floating Carriage Diameter Micrometer, Cover Slips, Camera Lucida

Heat Transfer in Two Phase Apparatus, Orsat Gas Analysis Apparatus

Heat pipe apparatus, Portable Petrol Engine, automotive heat exchanger

Heat Transfer Apparatus