Madhav International Ambala Sadar, Haryana

In a Wimshurst machine, the two insulated discs and their metal sectors rotate in opposite  directions passing the crossed metal neutralizer bars and their brushes.  An imbalance of charges is induced, amplified, and collected by two pairs of metal combs  with points placed near the surfaces of each disk. These collectors are mounted on insulating  supports and connected to the output terminals. The positive feedback increases  the accumulating charges exponentially until the dielectric breakdown voltage of the air is  reached and an electric spark jumps across the gap.  250,000 Volts. 5 Inch Sparks Banana jacks accept either banana plugs or alligator clips for use as high voltage power supply. No one can mistake a Wimshurst Machine, especially our Classic version. Our metal foil Leyden jars (capacitors) collect static and release all of the energy at once to produce mind melting and  eyeball bu ing sparks! 12 inch contra-rotating disks with metal sectors ensure electrostatic induction on demand.  Antique,1800's appearance. Features conductive plastic charge collecting brushes which  will not scratch disks. Rigid Victorian styled disk supports and beautifully vaneered wood base  make for authentic styling. Adjustable spark gap. Smaller gaps allow for more feequent sparks, while wider settings allow for long but slightly less frequent discharges. 2 Banana jacks allow  you to connect test leads - light up xexon flash bulbs, neon lamps, see electrostatic coronas  in a dark room! The perfect gift for Star Trek fans of all ages or sparking a child's interest in science!

Size : 40 x 24 x 43 cm

We are offering the van de graaff generator is an electrostatic machine for the production of very high dc voltages with low current intensity, making tests with the van de graaff generator completely harmless. The static electricity is made by the rubber band and two rollers. The current produced can be varied (approx. 6 µa).

Detail:The Van de Graaff Generator is an electrostatic machine for the production of very high DC voltages with low current intensity, making tests with the Van de Graaff generator completely harmless. The current produced can be varied (approx. 6 μA). Brand Easy Lab Shop Motor Driven Low Noise Dome Material Aluminum Dome Diameter 200mm Dome Finish Polished Connections 4mm Earth Sockets in Dome and Base Operating Voltage 220V AC, Also Available 11V AC Frequency 50Hz, Also Available 60Hz

As the cylinder goes down the inclined plane, the double cone goes up, apparently contravening the laws of mechanics. In reality the center of gravity of both moving bodies goes down. Made entirely of wood. Length of the inclined plane: 50 cm. Dimensions of the double cone: 35 cm. Dimensions of the cylinder: 35 cm.

For precision lab work calling for 0.1gm sensitivity, these two all-purpose balances meet your needs at surprisinglyeconomical prices. Their unique pan and bow design permits easy handling of laboratory materials classic. Stainless steel pan is of 90mm diameter.cap. 111gm.x 0.1gm.

Shape : Oval, Round

Application : Surgical Use

Condition : New, Used

Feature : Actual View Quality, Durable, Easy To Use

Total Carbohydrate : 1yrs, 2yrs, 5yrs

Zoom Capacity : 10-20x, 20-30x, 30-40x, 50-60x, 60-70x, 70-80x

The capacity Triple beam balance can be extended from 610gm to 26110gm. With supplementary masses Set 1wit. 500gm. and 2wt. 1000gm. #10105  

Student Stereo Microscope RSM-1 The student Stereo Microscope has been designed for Dissection/Inspection of specimens in Biology. Precisely designed long working distance objectives & wide field eyepieces produce an extremely large, brilliant & bright images. It is light in weight having sturdy base, stage with clips and reversible black & white plate, straight Binocular Head with Interpupillary adjustment & hand grip on stand for safe handling. Fixed Achromatic Objectives 2x or 3x & widefield eyepieces WF 10x or WF 15x (paired) are available. The Microscope is also available on pillar stand, with dioptric correction & transillumination base as optional. Supplied complete in a wooden storing cabinet at an affordable price. Observation Head - Straight Binocular head with interpupillary adjustment & hand grip.Stage - Stage with clips and reversible black & white plate.Objectives - Fixed Achromatic Objectives 2X or 3X.Eyepieces - Widefield Eyepiece WF 10X or 15X.Optional - Available with different stands and dioptre adjustments.

Student School Microscope RM-1 The School Microscope is designed for younger students of elementary education. It meets the needs of Science teaching and demonstration to beginners at school level. Being light weight & handy, it helps carrying around and is simple to use, yet having features of a compound Microscope Precision Optical Glass Lenses and metal components are engineered for years of reliable performance.Observation - Monocular straight fixed tube. Stage - Fixed square stage size 75 x 85mm with stage clips.Illumination - Plano-Concave mirror diameter 25mm mounted on gimble mount.Objectives - Achromatic 10X.Eyepieces - Huygenian 10X and 15X.

The structure of microscopic specimens becomes visible to the naked eye by taking the projection on the screen, during observation and demonstration to a group of students. The microscopes are compact in design and can easily contrast and distortion free magnified images on a fine ground glass screen. Body - Monocular Fixed Straight Tube, length 160mm.Nosepiece - Triple revolving nosepiece with accurate centering and positive click stopsStage - Detachable Mechanical stage for X-Y cross movement 50X75mm, fully graduated vernier scale.Illumination - 20W halogen lamp, 220/110Volts. Lamp slots provided for natural cooling of the illuminator.Objectives - Achromatic 4X - 10X- 40XSL.Eyepieces - Huygenian 10X and 15XScreen - 150mm diameter Glass Projection Screen is provided, can be rotated over 360° on Microscope tube.Model PRM-11 - All specifications are as per PRM-11A but has only 2 Objectives 10X & 40X. Screen size 100mm and without mechanical stage.Packing - The Microscopes are packed in full mould Styrofoam Boxes with Vinyl Cover, Duster, Cleaning Brush, Filter, Immersion Oil and Operating Manual.

Student Medical Microscope RM-3 All the Microscopes are latest in design, precision-engineered with finest features, usually found in high-priced models. Their operational functions can be carried out without any difficulty and provide excellent crisp clear image so that even advanced scientific studies are routinely possible. The Microscopes are extra-tough and suitable for a wide range of applications, from elementary education to college level. Stand - Stable and Robust, assembled from Aluminium DIE-CAST parts.Nosepiece - Quadruple nosepiece with accurate centering and positive click stopsStage - Detachable horizontal graduated mechanical stage size 120 X 120mm with adjustment for slide manipulation upto 45 x 75mm.Illumination - Plano-Concave 50mm adjustable mirror on gimble mount. Interchangeable with sub-stage illuminator (Optional).Objectives - Achromatic 10X, 40XSL and 100 XSL Oil immersion.Eyepieces - Huygenian 10X-15X or WF 10X.Packing - The Microscopes are packed in full mould Styrofoam Boxes with Vinyl Cover, Duster, Cleaning Brush, Filter, Immersion Oil and Operating Manual.

Student Compound Microscope RM-2A All the Microscopes are latest in design, precision-engineered with finest features, usually found in high-priced models. Their operational functions can be carried out without any difficulty and provide excellent crisp clear image so that even advanced scientific studies are routinely possible.   Body - Monocular Tube, inclinable upto 90°, length 160mm.Nosepiece - Triple revolving nosepiece with accurate centering and positive click stopsStage - Fixed square stage of 120x120mm with stage clips.Illumination - Plano-Concave 50mm adustable mirror on gimble mount.Objectives - Achromatic 10X & 40X.Eyepieces - Huygenian 5X-10X-15X (any two) or Wide field 10X.Packing - The Microscopes are packed in full mould Styrofoam Boxes with Vinyl Cover, Duster, Cleaning Brush, Filter, Immersion Oil and Operating Manual.

The specific gravity rod and clamp is used to suspend the Triple beam or Double pan balance above the table top to measure the specific gravity of a substance. It is also used for enhancing demonstrations.  

Country of Origin : 220 VAC

Material : Mild Steel

The Van de Graaff Generator is an electrostatic machine for the production of very high DC voltages with low current intensity, making tests with the Van de Graaff generator completely harmless. The current produced can be varied (approx. 6 µA). Van De Graff Generator Specification Motor Driven Low noise. Dome material Dia. Polished aluminum removable sphere. 200 mm dia. Belt Rubber Belt Connections (4) mm earth sockets in dome and base. Voltage Developed Up to (250) kV. Up to 2 to 4 inch Operating Voltage 220V AC 50Hz. Or 110V AC 60Hz. On request

Frequency : 50Hz. Or 110V AC 60Hz

Country of Origin : 220V

A strong yet sensitive balance made of durable washable plastic with sliding compensators for zero adjustment.  

Heavy round base with a precisely designed body, providing convenience for easy lifting and movement. Sensitive focussing is done by rack-pinion moving on a lapped dovetailed guideway with a stopper to limit the downward movement. A joint Revolving Arm is provided for moving magnifying lens over full area of the stage; it is easily replaceble by a special BULL EYE LENS 83mm. dia. to increase the field of vision. A plano-concave mirror fitted in fork for light reflection, sturdy removable handrests and arrangement for inserting white or black plate for respective background, help easy working on the instrument. Base - Heavy round base with precisely designed body.Focussing - Sensitive focussing, done by rack and pinion arrangement. Revolving arm provided for moving magnifying lens over full stage area.Stage - 100mm x 100mm with glass plate.Illumination - A plano-concave lens fitted in fork for light reflection.Optics - 10x & 20x Eyepieces & special Bull Eye Lens 83mm diameter.

Frame Made up of Heavy M.S. Tubes. Head Foot ABS Panel.  Urine Bag Holder. 2 Section uniformly perforated top Made up of CRCA Sheet. Smooth Crank system with Foldable Handles. Strong reinforced “U” Shaped Legs. Pre Treated with 7 tank chemical treatment. Epoxy Powder Coated. Optional: 2 section MattressChoice of Head foot ABSCastor WheelsRailing

Mechanically operated, two sectional, uniformly perforated CRCA sheet top. One fix lever handle at foot end to obtain head raise upto 80 deg.Precise rectangular tubular steel frame work. Strong reinforced, “U” shaped legs on rubber stumps. Detachable/fix head & foot S.S. bows with laminated panels.Pre-treated, epoxy coated finish. Locations provided for all accessories. Technical Specification are : Matt Surface : 188 L X 90 W cm.Overall Size : 208 L x 92 W x 60 H cms.

Seed Grain Boerner-divider   Body : Made of brass.Size : 86cm (Height) x 36cm (dia) (approx.)Weight : 8.5 Kg (Approx.) without pan.Capacity : Sample up to 3000g.No. of pockets : 38 pockets (cup made in single piece on die, increases accuracy).Accuracy : ±1% on a 1000g sample.Legs and supports : Powder coated steel.Material flowing components : No joints, smooth finishing.Standards : Meets BIS standards.Collecting pans : 2 No.

Body : Made of brass.Size : 86cm (Height) x 36cm (dia) (approx.)Weight : 8.5 Kg (Approx.) without pan.Capacity : Sample up to 3000g.No. of pockets : 38 pockets (cup made in single piece on die, increases accuracy).Accuracy : ±1% on a 1000g sample.Legs and supports : Powder coated steel.Material flowing components : No joints, smooth finishing.Standards : Meets BIS standards.Collecting pans : 2 No.

The newest Ripple Tank, with its sloped plastic surrounds and revolutionary wave dampers, produces clear wave patte  without interfering wave reflections from the side. The bright low voltage, White LED enables the wave patte  to be projected onto any white surface placed below the tank and these patte s are clearly visible, even without darkening the room.  Accsories Included 1 Ripple Tank Base 4 Support legs for base 2 Support arms (to hold rods that support the lamp and wave generator) 1 Electrical wave generator with rheostat control box and cell holder. 1 Support rod for wave generator 2 Light, Metal spring (to suspend wave generator from support rod) 1 LED diode on Arm (Use a 5V1amp. power source) 2 Straight metal barrier/reflectors 1 Short metal barrier 1 Concave/Convex metal reflector 1 Clear Plastic double convex lens 1 Clear Plastic double concave lens 1 Clear Plastic Rectangular Prism 1 Hand held stroboscope, with holder surface

Application : Physics Lab

Phase : Single Phase

Frequency : 50 Hz

Frame Material : Box

Shape : Rectangle

Connection Voltage : 220V

Prism Microscope RM-1P Stand - Heavy base stand made of die cast metal for the body stability.Body - Stable and robust, assembled from aluminium metal parts, Monocular tube inclinable upto 90° mechanical tube length 130 mm. Overall height of the microscope is 285 mm.   Eyepieces - Wide Field 10xAchromatic Objectives - 4x, 10x and 40xTotal Magnification - 40x ~ 400xConjugated Distance - 145 mm.Focusing - By moving stage, Range : 10 mm.Working Stage - Fixed square metal stage Size 100 x 100mm. with two slide holding clips.Nosepiece - triple revoloving nosepiece with positive centering and click stops.Illumination - Through prism.Accessories - Vinyl Cover, Duster, and Operating Manual.Packing - In mould styrofoam box.