Medical Pumps Dealers in Ambala

This device is used to administer prescribed doses of nutrients or medicines into the patient’s circulatory system. It can be arterial or intravenously used as well. The machine can inject controlled amount of medicines into the person’s body at set time intervals. There are three types of infusion pumps available with the manufacturer. They are:- A regular infusion pump Bolus: 600ml/h Flow rate range: 1-600ml/h Volume limit: 1-9999 ml Accuracy:±5％ KVO flow rate: 1ml/h, keep vein open KVO rate Power supply: AC100-240V, 50/60 Hz, 25VA Water Proof: IP *I Battery: Rechargeable lithium polymer battery, 7.4 V 1650mAh Electrical safety: compliance with the requirements of IEC 60601-1. Maximum Power consummation is 25W Battery recharge: When the pump is connected to the AC power, the battery will recharge automatically. It takes around 8-14 hours to recharge fully, it can then run for more than 5 hours continuously. Fuse Type: 220V 2A*2，12V 2A*2 Display or information: Flow rate, volume limit, accumulated volume, power indicator light, bed number, air occlusion. Alarm function: Infusion completion, occlusion, air bubble, low battery, control abnormal, no AC power supply, installation error. Max. size of outer shell: 120*140*190 mm-length* width* height Max. weight:＜2.5 kg Classification: Type B. Outer shell material is of ABS plastic operating condition: Environment temperature:+5℃- +40℃, atmosphere pressure 50-106kPa, related humidity 30%-90% Storage and transport condition: Environment temperature -15℃- +50 Pressure 50-106kPa，relative humidity 30%-90%. Applicable infusion pipe: All standard infusion pipe use "double dove" to test EMC: Complies with IEC/EN60601-1-2 and IEC/EN60601-2-24. A superior infusion pump with facilities like night mode working, body-weight mode conversion, 3 level occlusion alarm settings, dual-CPU monitoring system etc. Its details are as follows:-

CAT No. PUM-6000 Unique door-free structure design. It makes it easier and more convenient to operate. Pull up the handle, and put in the injection pipe down the middle groove. Then pull down the handle. Whether the pipe is in its place or not will be automatically indicated. Press the startup key to start infusion.

Infusion Pump, Ophthalmic Instruments, Physics Lab Instrument