Surgical Equipment Dealers in Mahesh Nagar, Ambala

We are offering operation tables, made entirely from stainless steel, in two halves slopping towards the centre a small wedge over the whole length separates the two halves, under the wedge provided a brass drain pipe. Removable and replaceable by sliding in or out blood and other fluids flow towards the centre of the table, from where these drip into the drain pipe and carried through an end drain tube to the receptacle after operation the whole top can be washed clean the drain pipe removed, cleared and replaced the s.s. Top is heated a set of electric lamp, placed to effect balanced heat distribution, dog holder with its s.s. Upright slide along slot in the top useful for fixing accessories a.s.s. Swing tray is fitted on a upright in one corner of the top useful for placing dissecting instruments accessories etc. Steel pipe frame handle and wheel for conscience in moving. Table top size 51”×18”×40” high. (b) –do—small type for frog, rabbit guinea pigs etc.

  BIS-4031. It is high pressure autoclave designed especially for conducting accelerated soundness tests on Cement or the autoclave expansion tests. It mounted in a sturdy supporting frame, and enclosed in a heat-insulated/metal housing which is attractively finished in hammertone paint. The top has a pressure regulator safety valve and pressure gauge. The unit attached to the side of the housing has power switcnes and pilot light for controlling the electric heating unit.

CAT No. PO-300R The device can accurately measure SpO2 and pulse rate in a 2% tolerance. The device will power off automatically without the signal for 4 seconds. Two AAA size batteries are required for operating,

Patient Stretcher Trolley with overall size 80″x22″x32″ steel tubular frame work of trolley mounted on 15 cms dia swiveling castors wheels removable stretcher top made of S.S. sheet supported on Tubular for the oxygen gas cylinders and saline rod (Optional) finished with epoxy powder coated paint or chrome plating optional.  

We are offering surgical microscope cold light. Specifications: microscope section binocular tube 90ã‚° ent & general surgery eyepiece 12.5 x 10 x 16mm dipptric adjustment magnification changes built in manual 3-step changer total magnification 7.5 x, 12.5 x, 20 x 1:3 field of view 37.8mm, 23.5mm, 14.5mm objective lens f = 200, 250, 300, 400mm (for general micro-surgical fields) working distance 200mm interpupillary distance adjustment 55 mm to 75 mm surgical microscope cold light illumination section type by optical light guide system light source 15v150 watts halogen lamp illumination control continuous adjustment field of illumination 70mm filter cobalt blue, red free, heat absorbing filter surgical microscope cold light stand section type floor stand vertical range of counterbalanced arm 400 mm

Our horizontal cylindrical autoclave are triple walled units. Outer body of our autoclave is constructed out of thick gauge stainless steel sheet of SS-304 grade. The inner chamber is also made of heavy gauge stainless steel sheet of SS-304 grade. The middle wall is also constructed from the strong and sturdy stainless steel sheet of ss-304 grade s stainless steel sheet. These are steam stocking models connected with a three way valve to control the sterilization cycle inside the autoclave. Our autoclaves are insulated by generous mineral glass ass wool insulation . The strong lid constructed out of thick stainless steel plate has a double safety radial locking arrangement , which ensures an easy and smooth opening and closing operation for all our autoclaves. The steam generator of the autoclave is also constructed from stainless steel sheet of grade ss-304.Our horizontal autoclaves are ideally suited for hospitals and research labs where safety is the first priority of the users, since it is equipped with a double safety steam release valve. At the same time we test all our autoclaves for up to 2.5 times the standard working pressure to ensure maximum safety and protection from any unfortunate incident. All our horizontal autoclaves are supplied complete with pressure gauge, pressure release valve automatic pressure control switch, vacuum breaker and steam trap as a standard feature. The unit is mounted on a tube stand constructed of high grade steel, which is duly pre treated with primers for rust proofing and painted with stove enamel.   Salient Features: Steam Stock Provision Versatile usage Stainless steel construction Ergonomic Design Energy Efficient Double Safety Radial Locking Arrangement Double Safety Valve Protection Hydraulic Testing Upto 2.5 times the working pressure Calibration And Protocol Documentation

We offer laboratory autoclaves, which are made from stainless steel and helps to fight the spread of infections. These are extensively used where contamination objects requires sterilization.

This device is used to administer prescribed doses of nutrients or medicines into the patient’s circulatory system. It can be arterial or intravenously used as well. The machine can inject controlled amount of medicines into the person’s body at set time intervals. There are three types of infusion pumps available with the manufacturer. They are:- A regular infusion pump Bolus: 600ml/h Flow rate range: 1-600ml/h Volume limit: 1-9999 ml Accuracy:±5％ KVO flow rate: 1ml/h, keep vein open KVO rate Power supply: AC100-240V, 50/60 Hz, 25VA Water Proof: IP *I Battery: Rechargeable lithium polymer battery, 7.4 V 1650mAh Electrical safety: compliance with the requirements of IEC 60601-1. Maximum Power consummation is 25W Battery recharge: When the pump is connected to the AC power, the battery will recharge automatically. It takes around 8-14 hours to recharge fully, it can then run for more than 5 hours continuously. Fuse Type: 220V 2A*2，12V 2A*2 Display or information: Flow rate, volume limit, accumulated volume, power indicator light, bed number, air occlusion. Alarm function: Infusion completion, occlusion, air bubble, low battery, control abnormal, no AC power supply, installation error. Max. size of outer shell: 120*140*190 mm-length* width* height Max. weight:＜2.5 kg Classification: Type B. Outer shell material is of ABS plastic operating condition: Environment temperature:+5℃- +40℃, atmosphere pressure 50-106kPa, related humidity 30%-90% Storage and transport condition: Environment temperature -15℃- +50 Pressure 50-106kPa，relative humidity 30%-90%. Applicable infusion pipe: All standard infusion pipe use "double dove" to test EMC: Complies with IEC/EN60601-1-2 and IEC/EN60601-2-24. A superior infusion pump with facilities like night mode working, body-weight mode conversion, 3 level occlusion alarm settings, dual-CPU monitoring system etc. Its details are as follows:-

Our Colposcope 3 Step Magnification is commonly used by Gynaecologists for directly visualization of vulva, vagina and cervix in addition to other areas. It is very flexible and can adjust the binocular eye pieces to get a fine focus. Features HighLights Objective Lens Moveable Binocular Eye Pieces Height is Adjustable Fine Focusing Tilting Arrangement High Precision Optics Reliable for In-office Surgical Application. Also Excellent for Operation Theatre and Lab Work. Very Economically priced. Specifications Colposcope Tilting Adjustment : 30° Upward 30° Downward Working Range (Fine Focusing) : 24V / 250W Lamp Total All-Inclusive Weight : 22 Kg. Filter : Red Free Green Individual Components Eye Piece : 12.5x Objective Lens : 300mmField Of Vision : 32mm Magnification : 5x, 10x, 20x - 3 step Ross Slide : 50mm Light Source : Halogen Fibre Optic.Single or Double Outlet Optional Accessories Beam Splitter With CCD Camera Adapter Table Clamp Attachment CCD Camera Optional accessories are listed as separate items in "Accessories" section under products, there can be bought separately. Applications Gynaecological (Including Vaginal and Uterine) Diagnosis and/or Surgery or Post-op. Inspection. Detection of Uterine Cancer, Vaginal or Uterine Erosions, Tumors, Congestion of Inflammation. Very Accurate Biopsy of Uterus or Vagina, (With Help Of Clearly Magnified View.)