Working Platform Dealers in Ambala

NAUGRALABS LABORATORY PRODUCT NAME: VIBRATING TABLE FOR TESTING LAB NaugraLabs Laboratory Product Code: NLE-Export-038060 Description and Specification for Lab Tenders Vibrating Table.  The Vibrating Table is used for compacting concrete cubes and cylinders. Salient Features Specifications : It is designed to carry a load of 140 kg.  Cement and Concrete Testing Lab equipment manufacturers,exporters and Cement and Concrete Testing Lab suppliers The apparatus consists of a motor fitted with a variable pitch pulley housed in a cabinet. The vibrations are imparted by means of off-balance masses rotating on a shaft of a vibrator clamped to the underside of the table top. The table top is 50cm x 50cm. and has stops along its edges to prevent moulds from walking off the table during vibration. A cross arm adjustable on a vertical rod at the center of the table is provided to hold the moulds while operating the table. The variable pitch pulley arrangement permits the frequency to be varied steplessly between a maximum of 3600 vibrations per minute. A speed regulation handle is provided for increasing or decreasing the frequency. A switch is provided for starting the motor, suitable for operation on 440 volts, 3 phase, 50 cycles, A.C.supply. Vibrating Tables of table top size 75cm x 75cm as well as 100cm x 100cm are also available. civil lab equipments manufacturers

Alpha Chem is manufactures,exporter & suppliers Elevating Pedestal Autopsy Table.  All stainless steel construction All 304 stainless steel with 4 finish. Table top, sink and grid plates are 14 gauge. Pedestal are 18 gauge All welds are Heliarc seams and joints, ground and polished to match adjoining surfaces All welds are rounded and polished on all inside and outside corners for easy cleaning Adjustable elevating actuators with touch control buttons Hydro-Aspirator with cold water control valve with reverse flow valve Body support solid or perforated 4 pieces 8 inches wide Spray Hose Assembly with cold water control valve nozzle and 10 ft. of pressure flexible hose Mixing faucet with gooseneck spout and wrist blade handles with vacuum breaker Heavy-duty 1/2 hp commercial disposal with switch and solenoid Large single compartment sink basin, 18” x 12” x 10” deep Rapid and positive drainage Removable Access Panel Plumbing and Electrical lines factory installed. Single point connection at customer location. May Require a trade professional at customers location FEATURES: Post mortem scale with scale pole and bracket Down draft ventilation assembly double-cone style Table rinse with cold water control valve and vacuum breaker Commercial Heavy duty Disposer 3/4 hp, 1 hp or 2 hp Single lever hot cold fixture Gas / air cocks Stainless steel full grid body supports removable Over-the-body dissecting tray  

Vibrating Table The Vibrating table is entirely constructed of thick steel. The table top is made of thick mild steel plate and has stops along its edges to prevent moulds from walking off the table during operation. A cross arm adjustable on a vertical rod at the centre of the table is provided to hold the moulds while operating the table. The variable pitch pulley arrangement permits the variation of frequency between maximum of 3600 vibrations down to 2600 vibrations per minute. A speed regulation handle is provided for increasing or decreasing the frequency. The vibrator is mounted on cushioned steel vibrating deck. A switch is provided for starting the motor. Operation on 440 V, three phase, A.C. supply.

Anti Vibration Table, Mayo Scissors, FTIR Spectromete

Anti Vibration Table, Altimeter, Water & Soil Analysis Kit Delux