Plating Services

Zinc plating involves the electrolytic application of zinc by immersing clean steel parts in a zinc salt solution and applying an electric current. We carry four different zinc plating products that are sure to fit your metal plating needs. They include: An Alkaline non-cyanide zinc plating, Bright Acid chloride zinc plating, Zinc-nickel alloy plating Cyanide zinc plating Our zinc plating process is suitable for rack or barrel plating and large volume batches. Acid Chloride Zinc A mixed ammonium/potassium chloride bright zinc plating process It produces brilliant, level and ductile deposits even on difficult substrates such as cast iron, heat treated and carbonitrited steel. The water soluble brightener goes into solution much more readily than a solvent based brightener. A bright chloride zinc plating solution.It has the same inherent advantages and benefits as but uses a different carrier component. SMF is an expert metal finishing and metal plating company, and is also a member of ASTM International. For more information about ASTM International, click here.   It is a thoroughly tested, stable and production proven zinc plating brightener process. It provides better zinc metal distribution than traditional alkaline zinc or chloride zinc plating systems. Operating parameters are wide and therefore it is an easy process to maintain. The process was developed to replace cyanide zinc plating without sacrificing the quality of the zinc deposit. Waste treatment is simplified and requires only a simple pH adjustment to precipitate zinc metal as zinc hydroxide. Benefits of Alkaline Zinc Plating:   Totally eco friendly and does not contain cyanides at all. The deposits from Alkaline Zinc have better uniformity and metal distribution. there by improved corrosion resistance. No corrosive fumes. Eliminates the use of poisonous Cyanide and also reduces the cost of waste treatment to destroy Cyanides. Low current density coverage is excellent. Conventional plating equipments required for Cyanide Zinc plating can be used. No need for additional expenses. Chromate acceptance ability is superior to Acid Chloride zinc Process.

Hard crome plating facility is avalible in our factory use in pvc exturusion machinery,pvc fitting mould for anticarrosion of all parts hardness of plating is about 58to 60 hrc size of tank 1mx1mx1m and 3mx0.5mx.5m.

Electroless Nickel Plating Service At SS Elite Metals, we are readily available to give you the best quality Electroless Nickel Plating Services planned to boost the wear resistance, corrosion resistance, and hardness of metal components. We are working as manufacturer and supplier offering the best quality of products at the best price. Different from the traditional electroplating, this chemical-based process ensures consistent coating thickness, even on intricate geometries, without needing an electric current. Why select Electroless Nickel Plating? Get the better Corrosion Resistance as it defends the components from rust and environmental harm. Get the uniform coating as it ensures even the plating on intricate shapes and inner surfaces. Boost up the Hardness – it enhances the wear resistance for extended constituent life. Friction Reduction can get better the performance in moving parts and even mechanical applications. It remains suitable for different metals such as aluminum, copper, stainless steel, and brass. Applications Aerospace & Automotive Electronics & Electricals Medical & Pharmaceutical Industrial Machinery Why SS Elite Metals? With innovative plating technology, strict quality control, and proficiency in surface treatment, SS Elite Metals gives the best Electroless Nickel Plating Service in Haryana that meet industrial standards for strength and performance.

Nickel plating is an electrodeposit process that offers moderate corrosion and oxidization resistance. Nickel is sometimes used to build up worn or undersized parts. Nickel is highly recommended for increased ductility and corrosion protection . Bright finishes are obtained by using proprietary brightening agents. We offer Bright nickel and chrome plating. Please contact us for a quote on your industrial chrome plating needs.

We are a renowned name in the industry, for rendering expert Copper Plating Service. The Copper Plating is carried out by our professionals as per the set industrial standards. Using the advanced plating technique and high-grade Copper, our Copper Plating has gained us a lot of appreciation in the domain. Our Copper Plating Service is available at affordable charges.

Advantages: • Hard deposition-60-70 HRC hardness• Reduce friction• Increase corrosion resistance• Increase wear resistance Our Facility: • Part of 2 meter length and 1 tonne Weight can be processed Application: Parts of• Plastic• Textile• Paper and• Automobile Industries

We are offering a wide array of Industrial Silver Plating. These are rendered by experts according to the client’s demands. In addition to this, offered industrial silver plating services are appreciated due to their reasonable prices and perfect execution.

At Samrat Tailors, you can easily plan your attire if you wish to get yourself a traditionally crafted piece of this type of Two Plated Pants.Tailors for Two Plated Pant in Wakad-Hinjewadi-Pimple Saudagar

NICKEL CHROME PLATING Perhaps the most common decorative metal plating technique is nickel-chrome plating.

Hard chrome, also know as industrial chrome or engineered chrome, is used to reduce friction, add wear resistance, or increase corrosion resistance. it is very hard, measuring between 66 to 70 HRC. Hard chrome tends to be thicker than the decorative treatement, typically ranging from 0.075 to 0.25 milimetre (0.0030 to 0.0098 in), but can range from 0.005 to 0.01 mil (0.00013 to 0.00025 mm). Surface defects and roughness are amplified, because hard chrome does not have a leveling effect. Hard chromium plating is subject to different types of quality requirement depending on the application, for instance, the plating on hydraulic piston rods are tested for corrosion resistance with a salt spray test.

Hard Chrome plating is an electrolytic method of depositing Chrome for engineering applications, from a Chromic acid solution.Deposits can be applied from .25 – 1,000microns thickness for a wide range of applications.

Nickel Plating is a process of depositing nickel on a plastic part. Parts to be plated must be clean and free of dirt, corrosion, and defects before plating can begin. To clean and protect the part during the plating process a combination of heat treating , cleaning and etching may be used. Nickel plating is a common surface finishing technique used for many purposes. The process deposits a durable and reliable coating of nickel onto a metal or non-metallic substrate. The coating helps protect the substrate from corrosion and can also provide many other benefits.

Chrome plating (less commonly chromium plating), often referred to simply as chrome, is a technique of electroplating a thin layer of chromium onto bright nickel plating object. The chromed layer can be decorative, provide corrosion resistance, ease cleaning procedures, or increase surface hardness. Sometimes a less expensive imitator of chrome may be used for aesthetic purposes.

Silver plating offers the highest electrical conductivity of all metals. It is not a precious metal and will oxidize rapidly. Silver plating is best suited for engineering purposes for solderable surfaces, electrical contact characteristics, high electrical and thermal conductivity, thermocompression bonding, wear resistance of load-bearing surfaces, and spectral reflectivity electrical applications, good corrosion resistance, good solderability, and other applications.   Silver Plating Specification : Specification: Mil-QQ-S-365 Silver Plating, Electrodeposited Type I Silver Plating - Matte Type II Silver Plating - Semi-Bright Type III Silver Plating - Bright   Silver Plating - Grades : With supplementary tarnish-resistant treatment. Without supplementary tarnish-resistant treatment Silver Plating - Tarnish-Resistance : Several options are available as supplementary coating for increasing tarnish resistance. Depending on solderability, or subsequent finishing steps such as painting or powder coating, we will recommend specific tarnish resistant coatings.

Hard Chrome Plating is an electrolytic process utilizing a chromic acid based electrolyte. The part is made the cathode and, with the passage of a DC   current   via lead anodes, chromium metal builds on the component surface. A wide variety of parts can be coated; it requires only the proper fixturing, a large enough bath, sufficient lifting capacity, and adequate power sources. Hard Chrome Plating   offers many attractive properties to the engineer. Electroless Nickel platting is a chemical platting process that autocatalyticaly deposit nickel alloyed with phosphorus 8-12 % by weight. Electroless nickel deposits areproduced by chemical reduction of nickel onto catalytic metallic substrates. Since the process requires no electrical current (as used in electrolytic deposition of chromium), the result is a very uniform coating that has a dense essentially amorphous structure as plated. Blind holes, threads, channels, recesses or internal areas receive the same amount of plate as sharp corners, edges or flat surfaces. Therefore total ‘as platted' thickness can often be reduced and close tolerances within 2 microns are maintained. At though electroless nickel deposites can be machined machining to size is frequently uminated.Deposition of nickel phosphorus coating occure by the following chemical reaction

We are offering our clients with a superior range of Hard Chrome Plating Roller that are known for their efficient performance and resistance against corrosion. The uses of superior engineered rollers are manufactured using finest grade materials and makes them function more smoothly and quietly. Moreover the selection of roller type and coating material depends upon the application and the web material. Specification External diameter Wall thickness Length 80 mm 2. 0 mm 3600 mm 100 mm 2. 5 mm 3600 mm 100 mm 3. 0 mm 3600 mm 120 mm 2. 5 mm 3600 mm 140 mm 2. 5 mm 3600 mm 160 mm 2. 5 mm 3600 mm 180 mm 2. 5 mm 3800 mm 200 mm 2. 5 mm 3000 mm 300 mm 2. 5 mm 3800 mm 400 mm 2. 5 mm 4000 mm

Established in the year 1995, Sharma Engineering is one of the prominent service providers in this industry which is engaged into providing supreme quality copper plating services. The service ranges we offer are highly admired for its optimum quality. Our team of highly efficient and expert employees put their all hard efforts to ensure highly satisfactory services to the customers. This has helped us in a large way to build lifelong business relations with our esteemed clientele. Mr Akhilesh Sharma (founder) runs the company with several client-oriented strategies to offer maximum help to the customers. Also, the services we offer are available at market leading rates.

We are specialized in quality Silver plating for all your requirements, it may be bright or matt finish , It may be fully or partial plating . We are capable to do the silver plating as per customer requirements and specifications. We are specialized in quality Silver plating on Aluminium conductors, Bus bars etc . We are capable to do the silver plating upto 1400 mm dia.

Our domain expertise has enabled us to lead in the market by providing competent Hard Chrome Plating Services. Our services are rendered for making the product corrosion and abrasion resistant. We have a team of deft professionals who render these services as per client’s preferences and budgetary constraints. We have garnered a strong clientele owing to timely competition of under taken project. Interested clients can approach us for availaing our Hard Chrome Plating Services at competitive prices.

We offer Zinc Plating exhibits good brightness, ductility and chromate receptivity, and has reliable and consistent coverage. Zinc plating is used extensively on Automotive, Aerospace and Military products.

Tin has a low melting point 232 ° C the electrical & electronic components to be soldered are being tin plated against atmospheric corrosion and to aid soldering. Tin is attacked by strong mineral acids & hot solutions of caustic soda & potash. Our company provides Bright Tin Plating / Matt Alkaline Tin Plating depending upon the customer’s requirements for a thickness of 3~12 Microns. We offer two types of Tin Plating by Electrolytic Process.

Being a non-conventional plating system, the Electroless Nickel Plating, which we render, doesn�t use current for deposition purposes. The Electroless Nickel Plating Service, we render, helps in getting intricate parts with deep recesses and holes, or uniformed layer thickness; resultantly minimizing excess build-up, if any, on the edges or corners, eliminating the post-plating grinding operation. The Electroless Nickel Plating Service produces an amorphous layer, having exceptional resistance against corrosion and uniform thickness of the deposited electro-nickel material. This Electroless Nickel Plating Process is best suited for taper cavities, spiders, breakers plates, plastic dies and other varied extrusion die parts. Why Our Electroless Nickel Plating? Ideal for complex shapes where uniform and controllable plating thickness is not possible by conventional electroplating processThis Electroless Nickel Plated Layer offers a surface hardness of 48 to 62 HRC with excellent bonding and the plated layer does not flake-off.Helps the barrels for injection molding machines by giving them non-stick propertyEasy cleaningHelps in re- building worn-out punches to original dimensionsThis coating is also used for costly instruments and oil field as well. Electroless Nickel Plating Properties Superior corrosion protectionUniform and controllable layer thicknessNon-stick property for plastic molds and extrusion diesWear resistanceSolderabilityLubricityDuctility