Plating Services

Nickel Plating is a process of depositing nickel on a plastic part. Parts to be plated must be clean and free of dirt, corrosion, and defects before plating can begin. To clean and protect the part during the plating process a combination of heat treating , cleaning and etching may be used. Nickel plating is a common surface finishing technique used for many purposes. The process deposits a durable and reliable coating of nickel onto a metal or non-metallic substrate. The coating helps protect the substrate from corrosion and can also provide many other benefits.

Advantages: • Hard deposition-60-70 HRC hardness• Reduce friction• Increase corrosion resistance• Increase wear resistance Our Facility: • Part of 2 meter length and 1 tonne Weight can be processed Application: Parts of• Plastic• Textile• Paper and• Automobile Industries

Surface treatment is made from automated system by hanging parts with plating jigs and cation jigs. Zinc-nickel alloy plating, and CED painting are treated on the surface according to their usage.

Hard Chrome Plating is an electrolytic process utilizing a chromic acid based electrolyte. The part is made the cathode and, with the passage of a DC   current   via lead anodes, chromium metal builds on the component surface. A wide variety of parts can be coated; it requires only the proper fixturing, a large enough bath, sufficient lifting capacity, and adequate power sources. Hard Chrome Plating   offers many attractive properties to the engineer. Electroless Nickel platting is a chemical platting process that autocatalyticaly deposit nickel alloyed with phosphorus 8-12 % by weight. Electroless nickel deposits areproduced by chemical reduction of nickel onto catalytic metallic substrates. Since the process requires no electrical current (as used in electrolytic deposition of chromium), the result is a very uniform coating that has a dense essentially amorphous structure as plated. Blind holes, threads, channels, recesses or internal areas receive the same amount of plate as sharp corners, edges or flat surfaces. Therefore total ‘as platted' thickness can often be reduced and close tolerances within 2 microns are maintained. At though electroless nickel deposites can be machined machining to size is frequently uminated.Deposition of nickel phosphorus coating occure by the following chemical reaction

Our company offers Nickel Chrome Plating Services, which is renowned as one of the most decorative metal plating process. Nickel chrome plating services provides a protection layer from the corrosion and wears on the materials and gives a decorative chrome finish to the SS and MS materials that can resist for a longer duration.

We are one of trusted suppliers of Zinc Plating that offers solderability, improves corrosion resistance, prevents galling of metal surfaces. Used in varied industries, these zinc plating can be availed in industry standard as well as customized specifications as per the requirement of our clients. We offer these platings at market leading prices. we have gained expertise in offering a wide variety of zinc plating process. Zinc coatings prevent oxidation of the protected metal by forming a barrier and acts as a sacrificial anode. With these attributes this plating is widely used in various industries like textile, automobile and allied. Owing to premium quality, our plating service has received huge appreciation from our valued clients across the globe.

NICKEL CHROME PLATING Perhaps the most common decorative metal plating technique is nickel-chrome plating.

Rhodium is white in color and is a precious metal, meaning non-oxidizing.  Rhodium is a member of the Platinum Group of Metals. The Platinum Group of Metals is a group of six metals which include platinum, rhodium, palladium ruthenium, osmium, and iridium.  These six metals all share some common physical properties.  They have high melting points, are very dense, are very hard, and are very resistant to corrosion. Rhodium is the hardest of the PGM’s.  Its’ hardness is about 800.  Compare that to cobalt hardened gold at 200 knoop,14k ElectricGold at 400 knoop and at 400 knoop.  Rhodium is the hardest, most wear resistant metal that we plate at Professional Plating.  In addition to its’ hardness, rhodium is extremely resistant to corrosion.  Rhodium is an excellent choice where contact with corrosive gases or other high corrosion environments will be encountered.  Remember also that as the operating environment temperature increases, the corrosion rate will also increase.  So in high temperature applications, rhodium will provide a longer life cycle, than, for example, gold will.  Rhodium will reliably operate beyond 1000F. Rhodium is an extremely bright white metal. It is much whiter than palladium and platinum.  For this reason and because of its’ extreme hardness, rhodium is very commonly used as an electroplated surface for fine jewelry. Rhodium plated product is well suited for such applications as sliding electrical contacts that require protection from sliding contact wear or galling.  Also, because of its’ high temperature tolerance to oxidation, rhodium is an extremely good choice for high voltage/high amperage electrical contacts where contact arcing would otherwise cause the formation of highly electrically resistive oxide formations on the contact surface.

We are a renowned name in the industry, for rendering expert Copper Plating Service. The Copper Plating is carried out by our professionals as per the set industrial standards. Using the advanced plating technique and high-grade Copper, our Copper Plating has gained us a lot of appreciation in the domain. Our Copper Plating Service is available at affordable charges.

Zinc plating involves the electrolytic application of zinc by immersing clean steel parts in a zinc salt solution and applying an electric current. We carry four different zinc plating products that are sure to fit your metal plating needs. They include: An Alkaline non-cyanide zinc plating, Bright Acid chloride zinc plating, Zinc-nickel alloy plating Cyanide zinc plating Our zinc plating process is suitable for rack or barrel plating and large volume batches. Acid Chloride Zinc A mixed ammonium/potassium chloride bright zinc plating process It produces brilliant, level and ductile deposits even on difficult substrates such as cast iron, heat treated and carbonitrited steel. The water soluble brightener goes into solution much more readily than a solvent based brightener. A bright chloride zinc plating solution.It has the same inherent advantages and benefits as but uses a different carrier component. SMF is an expert metal finishing and metal plating company, and is also a member of ASTM International. For more information about ASTM International, click here.   It is a thoroughly tested, stable and production proven zinc plating brightener process. It provides better zinc metal distribution than traditional alkaline zinc or chloride zinc plating systems. Operating parameters are wide and therefore it is an easy process to maintain. The process was developed to replace cyanide zinc plating without sacrificing the quality of the zinc deposit. Waste treatment is simplified and requires only a simple pH adjustment to precipitate zinc metal as zinc hydroxide. Benefits of Alkaline Zinc Plating:   Totally eco friendly and does not contain cyanides at all. The deposits from Alkaline Zinc have better uniformity and metal distribution. there by improved corrosion resistance. No corrosive fumes. Eliminates the use of poisonous Cyanide and also reduces the cost of waste treatment to destroy Cyanides. Low current density coverage is excellent. Conventional plating equipments required for Cyanide Zinc plating can be used. No need for additional expenses. Chromate acceptance ability is superior to Acid Chloride zinc Process.

We offer hard chrome plating. We at new trimco enterprises holds one of the biggest hard chrome plating facility and regions around,served by a undisputed work team. We also undertake hard chrome plating of: rubber dispersion kneaders industrial rollers diesmoulds capacity job length - upto 5500mm job diametre - upto 1000mm job weigth - upto 3000kgs.

Zinc pating high corrosion resistance with fore deferent passivesion .zinc plating is identical to electro-galvanizing in principle because both are electro-deposition processes. However, zinc plating is used on small parts such as fasteners, crank handles, springs and other hardware items ratherthan sheet metal. The zinc is applied as an expendable electrode in a cyanide, alkaline non-cyanide, or acid chloride salt solution

We are offering a wide array of Industrial Silver Plating. These are rendered by experts according to the client’s demands. In addition to this, offered industrial silver plating services are appreciated due to their reasonable prices and perfect execution.

Today, all the job undertaking organizations that are engaged into surface designing and moulding related jobs are gaining higher demand in the industry. We are among those foremost service providers in the market who are highly admired among its clientele for offering high quality flash hard chrome plating services. Established in the year 1995, we are consistently serving the industry for over a decade now and continuing with achieving consistent growth under the strict supervision of Mr Akhilesh Sharma (founder). Except for flash hard chrome plating, we also offer metal hard chrome plating services. The price range we offer is best in the market.

Being a non-conventional plating system, the Electroless Nickel Plating, which we render, doesn�t use current for deposition purposes. The Electroless Nickel Plating Service, we render, helps in getting intricate parts with deep recesses and holes, or uniformed layer thickness; resultantly minimizing excess build-up, if any, on the edges or corners, eliminating the post-plating grinding operation. The Electroless Nickel Plating Service produces an amorphous layer, having exceptional resistance against corrosion and uniform thickness of the deposited electro-nickel material. This Electroless Nickel Plating Process is best suited for taper cavities, spiders, breakers plates, plastic dies and other varied extrusion die parts. Why Our Electroless Nickel Plating? Ideal for complex shapes where uniform and controllable plating thickness is not possible by conventional electroplating processThis Electroless Nickel Plated Layer offers a surface hardness of 48 to 62 HRC with excellent bonding and the plated layer does not flake-off.Helps the barrels for injection molding machines by giving them non-stick propertyEasy cleaningHelps in re- building worn-out punches to original dimensionsThis coating is also used for costly instruments and oil field as well. Electroless Nickel Plating Properties Superior corrosion protectionUniform and controllable layer thicknessNon-stick property for plastic molds and extrusion diesWear resistanceSolderabilityLubricityDuctility

Electroless Nickel Plating Service At SS Elite Metals, we are readily available to give you the best quality Electroless Nickel Plating Services planned to boost the wear resistance, corrosion resistance, and hardness of metal components. We are working as manufacturer and supplier offering the best quality of products at the best price. Different from the traditional electroplating, this chemical-based process ensures consistent coating thickness, even on intricate geometries, without needing an electric current. Why select Electroless Nickel Plating? Get the better Corrosion Resistance as it defends the components from rust and environmental harm. Get the uniform coating as it ensures even the plating on intricate shapes and inner surfaces. Boost up the Hardness – it enhances the wear resistance for extended constituent life. Friction Reduction can get better the performance in moving parts and even mechanical applications. It remains suitable for different metals such as aluminum, copper, stainless steel, and brass. Applications Aerospace & Automotive Electronics & Electricals Medical & Pharmaceutical Industrial Machinery Why SS Elite Metals? With innovative plating technology, strict quality control, and proficiency in surface treatment, SS Elite Metals gives the best Electroless Nickel Plating Service in Haryana that meet industrial standards for strength and performance.

Copper kalash gold plating service and copper kalash supplier plating for pure gold for use temple all India copper kalash supplier and Copper kalash gold plating service

Zinc plating is identical to electro galvanizing in principle in that both are electrode position processes. Zinc plating is used for coatings deposited on small parts such as fasteners, crank handles, springs, and other hardware items. The zinc is supplied as an expendable electrode in a cyanide, alkaline non-cyanide, or acid chloride salt solution. Cyanide baths are the most operationally efficient, but they potentially create a pollution and hazardous material problem.After alkaline or electrolytic cleaning, pickling to remove surface oxides, and rinsing, the parts are loaded into a barrel, rack, or drum and immersed in the plating solution. Various brightening agents may be added to the solution to add luster, but careful control of the bath and brightener is needed to ensure a quality product. Post-plating treatments may be used to passivate the zinc surface and at the same time impart various translucent colors to the coating. These post-plating treatments may be used to provide a desired color or to extend the life of the plated coating.The normal zinc-plated coating is dull gray in color with a matte finish, although whiter, more lustrous coatings can be produced, depending on the process or agents added to the plating bath or through post-treatments. The coating is thin, ranging up to 1 mil (25 µm), restricting zinc-plated parts to very mild (indoor) exposures. ASTM Specification B 633 lists four classes of zinc plating: FeZn 5, FeZn 8, FeZn 12 and FeZn 25. The number indicates the coating thickness in microns. The coating finds application in screws and other light fasteners, light switch plates and other small parts. Materials for use in moderate or severe applications must be chromate conversion coated.

Anand Industries provide electroless nickel plating that is a non-conventional plating system where no current is used for deposition that helps in uniform layer thickness plating on intricate parts with hole and deep recesses.

Electroless Nickel Plating ensures enhancement in durability and corrosion resistance of motors, rotors, drive shafts, door knobs etc. Our team of well trained professionals is known for accomplishing the tasks within committed time frame in hassle free manner.