Ovesh Industry Vitthal Udyognagar, Anand, Gujarat

The Conventional Rotator is designed to aid the welding of cylindrical vessels. By using independent drive and idler units, vessels of varying lengths can be placed on the rotators supported on the rotator wheels. The wheels can be adjusted on the base frame to accommodate different vessel diameters. There is two type of rotator available one is conventional and another is self alignment. In self alignment wheel takes it’s own position as per diameter of components. So, no need to adjust manually. We can supply base mount, trolley mount and as per need of customer.

Condition : New

Application : Industrial

Material : Metal

Welding positioner is designed as per components size and height, base on that we can consider Center of gravity and torque to perform the machine with low power range. There is special features are added by variable speed drive and geared motor to control the speed during welding process. Also, there is provision in control panel for start, stop, reverse, forward etc.

Condition : New

Application : Industrial

We offered complete solution in transfer material from one transfer points to another transfer points / bulk silos and it’s increase the bulk handling productivity and high feed rate with low cost of transfer material. This electro-magnetic transfer is the working on principle of amplitude of screen / motors to give the flow direction of material.   More About Information for Vibrating FeederVibratory feeder is mainly used the transfer light weight material to eliminating dust and covered with fully enclosure. The material will transfer through shaking of geared motor. This design is fully rigid with proper structural support for long life and low power consumption.

Application : Used the transfer light weight material,Industrial

The Transfer car specially design with rigid construction, Bearing housing arrangement and top bad is as per custom requirement. If is operated by geared motor with cable reeling drum arrangement. Also, we can supply as per customer requirement.

Application : Industrial

We are one of the leading in screw conveyor to give the solution for inclined screw conveyor, through conveyor, Twin conveyor to deliver powder, granular particles and stores in ware housing, hoppers, etc. This screw conveyor is used to continue flow or as batch type transfer material from output point to storage points. It is very simply compact and free flowly design.   More About Information for Screw conveyorScrew conveyor mainly used for conveying powder, granules, food products etc… in horizontal or inclined direction. The feature of this construction is helix flight design to easily move the material with low power consumption. The flight is made in one half, full and double pitch of the screw, which is used as per application.

Material : M.S, S.S

Application : Industrial,To continue flow or as batch type transfer material from output point to storage points

Rotary Air lock valve, As per its name this valve is locked air due to precision manufacturing of rotor and rotor body. So, all material flows freely from the bottom of the dust collector or cyclone separator. Mainly function is to prevents of produce the negative pressure in dust collector/cyclone separator and continue feed the material in hopper or collection bin.

Material : M.S. /S.S.

Number Of Flower : Airlock

Application : Industrial

Reverse pulse jet type bag filter consist of non woven polypropylene bags, Aluminum casted ventury, wire cage and air pipes . Function of this bag filter is filter air passed from bags and dust particles stick on bags. Then after some time interval compressed air blow in bags, bags will be vibrating and dust particles fall down in hopper. The dust collector is available in multiple of bag range like, 16, 25, 36, 49, 64, 81, etc… and height to suit with customer premises. Which is most useful to control the emission level.

Material : M.S / S.S

Application : Industrial

We are manufacturing customized and safety based plc logic control panel for various industries. Plc which we are dealing with siemens, mitsubishi, ab, delta, schneider make.

Number Of Flower : PLC

Material : Metal

Total Carbohydrate : 1 Year

Application : Industrial

Mechanical shanker type dust collector consists of dust bags, mechanical vibrating motor and vibrating systems. Working function of this bag filter is air passed through bags and all dust particles are fallen in hopper due to vibrating of bags through mechanical shaker type motor. This dust collector is very economical.

Number Of Flower : Mechanical

Condition : New

Efficiency : Consistent & High

Material : M.S / S.S

We are offering the crane solution with impact to easy material handling and low price of operating as well as capital cost. We have developed the specially bearing housing to reduce the power consumption. We supply all type of overhead cranes, like single girder, double girder, zib crane as per span suggested by customer. The capacity of cranes is up to 100 MT.Ladel transfer car (Remove word ladel and consider Transfer car. The Transfer car specially design with rigid construction, Bearing housing arrangement and top bad is as per custom requirement. If is operated by geared motor with cable reeling drum arrangement. Also, we can supply as per customer requirement.

Application : Industrial

Rely on us to buy the best in class Electrical Control Panels; we are a notable Supplier in this domain. In order to deliver qualitative lot of products, we have hired a team of quality examiners who strictly check the product quality at several stages.   Electrical and Electronics Automation. Cables (Power & Control) Bus bar MCB MCCB Earth Leakage circuit breakers Incomer selector Selection switch Starter (DOL, Star delta, Reverse forward) Overload relay Timing delay timer Contactor VFD Ammeter Volt meter Hour meter MPCB Fuses Push button Indicating lamp CT Power and control terminal AC / DC motor   Instrumentation components Level Measurement Pressure Measurement Temperature Measurement Vibration Measurement Process control All above items (A & B) are used in manufacturing in following control panel. So, we can supply control panels (power distribution, MCC, PLC, Power factor correction plan etc…) as per logic of customer and it’s spare as mentioned above. All reputed make PLC & Relay logic type MCC with all type of IP (IP 42, IP 55, IP 65, ) protection. Outdoor type feeder panel VFD Panels Air circuit breakers panels Power & Light Distribution Panels Automatic power factor correction panel Power Control center Rolling mill starter panel Distributions panels Low tensions panels and High tension panel Also, we can supply Cable tray, Transformer, All types of Limit switches, Linear and Rotary, Servo controlled stabilizer, controller (Voltage, Current, Frequency, Power Factor), Ultra Isolation transformer, All panels are made as per customer design, so selection of individual components as per load data of electrical items or as suggested by customer. All above are related to electrical items. Now, we can supply in following mechanical products also.

Number Of Flower : Electrical

Application : Industrial

Cyclone Separator is simply fabricated construction from M.S. /S.S. material. In this, air entry is tangential so, due to tangential entry of air there is cyclone produce in cyclone separator and all heavy dust particles are fallen in bottom of hopper and clean air remove from the top of cyclone. Also, we can supplied multi cyclone as per customer requirement.

Material : M.S. /S.S.

Condition : New

Usage : Industrial

Column and boom design as per require span and height of components or as per customer need. That design is considering by light weight and weight balancing to perform as require speed of welding.

Number Of Flower : Column Boom

Condition : New

Usage : Industrial

Total Carbohydrate : 6 Months

Material : Metal

Material : Metal

Application : Industrial

Condition : New

Blower is known for its high efficiency with lower power consumption due to specially design of fan blade,  rigid construction and dynamically balanced impeller. We provides blower as per customer orientation and require specification.

Number Of Flower : Centrifugal

Pressure : Up to 30 inch

Body Material : M.S / S.S / PP / FRP

Application : Industrial

Cartridge type dust collector’s function will be same as reverse pulse jet type function. Also, its bag are manufactured in splited. So, filtration area is more compare to other dust collector. So, this is very high efficient dust collector with compact space.

Application : Industrial

Bucket Elevator to move material in vertical direction and we have taken care of tensioning arrangement and special design crowned pulley for gripping the bucket belt. We are using casted/fabricated bucket for lift the material. The bucket elevator specially design with rigid construction for its long life. The size and capacity is design as per customer requirement.

Application : To move material in vertical direction,Industrial

We are fully backed by a reliable team of conveyor professional’s solutions and modern facility that aid us completely for furnishing standard as well as tailored transportation requirement of the bulk material. We are supplying Belt conveyor with conveyor roller, Carrying idler, impact idler, self-align carrying idler, V-carrying idler, Return Idler, Self-align return idler, Conveyor structure, Drum pulley, Bearing housing and labyrinth seal.   More About Information for Belt conveyorBelt conveyor system with idler roller frame, return roller etc. Our roller design is mainly prevent to dust and rain to enter in bearings by using dust cover and rain cap. Also manufacturing pulleys, carrying rollers with rubber disk, guide rollers etc.

Usage : Industrial,For transportation of the bulk material

Our Apron conveyor is developed by the no of flight link with simply roller chain arrangement, which give the long life solution to transfer the solid material with sort span.   More About Information for Apron conveyorThe Apron conveyor is mainly design low power consumption with special construction of roller chain with K1, K2, A1, A2 attachment and individual apron top palates (join on chain) to transfer the material inclination or in horizontal position, We can design width of the conveyor as per load capacity and components shape and size. 

Condition : New

Usage : Industrial