DR ENGINEERING Ankleshwar, Gujarat

Vibro Sifters are used to ensure the correct product quality of powders or liquids is achieved by removing oversize contamination. DRE sifters are incredibly versatile and can be used for size based separation of almost any material. These vibrating sifters fit neatly into production lines.   Our manufacturing Capacity of Multimill is as per below list.  ​ Lab Model: 12 inch to 18 inch Production model: 20 inch to 60 Inch Vacuum Vibratory sifter Product Output Ratio is also depending on the Sieves size. Spares of the Sifter I.e. (Sieves, Gasket in single piece, spring, and clamp) are also available.  

The design of the Vertical Screw Blender has no material retention zone within the product area. The conical shape of the vessel allows for quick and complete self-draining without product retention making the Mixer easy to clean. The superior design of mixing arm helps in rapid drying/ mixing under vacuum / Non Vacuum. These conical Mixer is suitable for final of products such as powders, granules, pastes, and slurries especially when they are brittle/ lumpy and temperature sensitive in nature. ​   Our manufacturing Capacity of Multimill is as per below list.  ​ ​Production model: 500Ltrs. To 7000Ltrs.   

Vacuum Tray Dryer (VTD) is suitable for drying of thermal sensitive materials easily resolved, polymerized of deteriorated under higher temperature. Sterilization can be conducted prior to the drying process, during which no matter is allowed to enter the product. Static vacuum dryer eliminates the configuration damage of the drying materials therefore widely used in pharmaceutical, chemicals and foodstuff etc.​   Our manufacturing Capacity of VTD is as per below list.  ​ ​ Lab Model: 6Tray Production model: 24 Tray to 96Tray

V Blenders (also known as V-Shell, Vee Cone or Y Cone blenders). These blenders are ideal for low shear tumble blending of powders and granules.V Blenders are designed so that they provide an intensive mixing action. As the V-Shell is rotated the powder is repeatedly divided and then mixed together. • Any size up to 6000 litres • Single or Double plinth designs ​   Our manufacturing Capacity of Multimill is as per below list.  ​ ​ Lab Model: 5L Production model: 100L. To 3000L.

Tray Dryers are useful in Pharmaceutical, Chemical, Dyestuffs, Food and Automobile Industries. A Tray Dryer is an enclosed, insulated housing in which Trays are placed on angled rack. Material to be dried is placed on the trays. Heating media is Hot Air, and heat transfer is direct from Hot gases or Electric heaters to Wet raw material with help of specially design Air circulation fan arrangement to maintain the constant temperature in the dryer and ensures uniform circulation of hot air. This will Enhance the Drying of raw material & reduces the Drying time Drastically​   Our manufacturing Capacity of Tray Dryer is as per below list.  ​ ​ Lab Model: 6Tray Production model: 24 Tray to 148Tray

A MS /SS storage tank is a container, usually for holding liquids, sometimes for compressed gases (gas tank). The term can be used for reservoirs (artificial lakes and ponds), and for manufactured containers​   Our manufacturing Capacity of Multimill is as per below list.  ​ ​ 500 To 20KL.

RCVD suitable for drying of materials which cannot resist high temperature, material which are easily oxidized, volatatile materials which should be retrieved, materials strong irritant and poisonous in nature. The roto cone dryer with improved technology integrates during operation under vacuum. The roto cone dryer facilitates enhanced drying efficiency, low temperature operation and economy of process by total solvent recovery. It helps cGMP based working by achieving optimum dust control, while offering advantages of efficient charging and discharging of materials. The drying unit equipped with lump breakers initially breaks large lumps and subsequently powders them (in single cone). The rotary action of the dryer together with mechanical action of the breakers cuts down drying time and gives a lump free product. ​   Our manufacturing Capacity of Multimill is as per below list.  ​ ​Lab Model: 25L Production model: 100L. To 2000L.

Dryer is mainly used for drying materials with humidity or granularity in the industries of mining, construction material, metallurgy and chemical. And it has strong adaptability to the materials and can dry various materials. Besides, it has simple structure and reliable operation. In our company, this series applies the new type scatter plate device, and it has many functions, such as direction guide, flow equalization, scattering material and so on. And it can make the material uniformly distributed at radial cross section. Contact the heat airflow completely and use the heat energy fully. Moreover, it adopts reasonable operational parameter, and compared with general dryers, it reduces the coal and power consumption by more than 10-15%, and increases the output by more than 10-15%. At present, it is widely used in cement and mining,Organic industries. ​   Our manufacturing Capacity of Rotary Dryer is as per below list.  ​ ​ Production model: 100kg/hr. To 2000kg/hr

The Ribbon Blender for homogenous mixing of dry powders of different bulk densities used in the Food, Mineral, Pharmaceutical, Paint & Chemical Industries. It is a simple versatile mixer which can also mix semi wet material. Ribbons of various designs are available to handle different materials. The mixer consists of a cylindrical shell inside which rotates a double helix shaft fitted with spiral inner and outer ribbons. During rotation of the shaft, the ribbons lift, convey and intermix the material to get a homogenous mass in short intervals. Discharge is from the bottom by a quick opening valve. ​    Our manufacturing Capacity of Multimill is as per below list.  ​  500L. to 2500L.  

Our Reactors Frequently used for the term relates specifically to catalytic reaction systems where either a homogeneous or heterogeneous catalyst is present in the reactor. Sometimes a reactor per se is not present by itself, but rather is integrated into a process, for example in reactive separations vessels, retorts, certain fuel cells, and photocatalytic surfaces.  Our manufacturing Capacity of Multimill is as per below list.  ​ ​500 To 10KL

RMG is used for Homogenous mixing of dry & wet powders, deaglomeration of wet mass and fast dispersion of binding agent. Dust free, high free flowing dosing particles, high uniformity of granule size. AC frequency control for bottom driven Impeller Mixer with 3 or 4 blades with exclusive scrape side design and Chopper positioned to make granules. Default Pneumatic discharge assembly and pneumatic bowl lifting makes ease the operation. We supplies RMG of capacities 5Ltrs to 2000Ltrs.​   Our manufacturing Capacity of Multimill is as per below list.  ​ Lab Model: 5L with 10L Interchangeable Bowl Production model: 100Ltrs. To 2000Ltrs

Planetary Mixer is a vertical batch mixer ideally suitable for mixing of ointments, paste, cream, dry powders or wet mass. Planetary Mixer, as name suggests it has planetary type agitation pattern. The beaters rotate around itself as well as in circular path in the bowl; this enables faster and better mixing of materials at a considerably lesser time.   Our manufacturing Capacity of PLM is as per below list.    100L. to 1500L

Paste Kettle we fabricate and develop is a specially designed unit for application in pharmaceutical processing units. It is used for preparation of binder materials which are highly used in medicine and food industries. We are considered as the best Paste Making Kettle Manufacturer and Starch Paste Mixing Kettle.   Our manufacturing Capacity of Multimill is as per below list.  ​ Lab Model: 1L to 25L.  Production model: 50L to 1500Ltr. Spares of the Paste Kettle i.e. (Gasket,Temp Sensor) are also available.

The machine for mixing of ointment. The unit is provided with jacketed mixing vessel fitted with stand on fixed low-speed anchor type stirrer driven by motor and reduction gearbox as per end user requirement with Wax Phase Vessel and Water Phase Vessel The Ointment Manufacturing Plants are ideal tools for the pharmaceutical & cosmetic industries for the production of Ointment, Cream, Lotions, Tooth Paste & other emulsions & homogenizations.   Our manufacturing Capacity of Ointment Cream MFG Plant is as per below list.    100L. to 1500L

Octagonal blenders are use in pharmaceutical industry for gentle blending of dry granules or powder. The blender features an octagon shaped body with rectangular central portion and top & bottom polygonal frustum. These are provided with baffles for fast and efficient mixing, charging port and outlet with butterfly valve. ​   Our manufacturing Capacity of Multimill is as per below list.  ​ ​ Lab Model: 5L Production model: 100L. To 3000L.

Multi mill is widely used for wet and dry granulation, pulverization etc. of pharmaceutical, chemical, bulk drug, cosmetic, colours, dyestuffs. Food products etc.The unit consists of stainless steel hopper, processing chamber with beater assembly, motor, VFD /DOL starter, three speed pulley, screen and sturdy body.SS beaters having knife and impact edges rotate within a selected screen. The material fed in the hopper enters into the processing chamber where it moves to the pentery and passes through screen. Output & quality of final products depends on (I) shapes of beaters (Knife/ impact edge) (ii) speed (iii) size of screen.Our multi mill machines can be customized based on the specific requirements of the clients.    Our manufacturing Capacity of Multimill is as per below list.  ​ ​ Lab Model: 1 HP 2880 RPM Motor Production model: 3HP to 10HP Motor Product Output Ratio is also depending on the Screen size. Spares of the Multimill I.e. (Screen,Gasket, and Beater Assembly) are alsoavailable.

 IPC BIN       ​ IPC Bin The use of IPC minimizes the overall amount of handling that occurs in a manufacturing process and other such process. Available in different capacities ranging from 25 liters to 2500 liters, these containers offer many benefits including automation capability and dust free product transfer.     

A shell and tube heat exchanger is a class of heat exchanger It is the most common type of heat exchanger in oil refineries and other large chemical processes, and is suited for higher-pressure applications. As its name implies, this type of heat exchanger consists of a shell (a large pressure vessel) with a bundle of tubes inside it. One fluid runs through the tubes, and another fluid flows over the tubes (through the shell) to transfer heat between the two fluids ​ Our manufacturing Capacity of Multimill is as per below list.  ​ 0.5M2 TO 10 M2

Production Capacity : Model

The Double Cone Blender is an efficient and versatile machine for mixing dry powder and granules homogeneously. All the contact parts made out of stainless steel of required grade by customer. Two third of the volume of the Cone Blender is filled to ensure proper mixing. It can be used for Pharmaceutical, Food, Chemical and Cosmetic products etc.  ​   Our manufacturing Capacity of Multimill is as per below list.  ​ Lab Model: 5L Production model: 100L. To 2500L.  

Our range of tablet COATING PANS is extensively used for sugar and film coating of tablets, pallets and granules. The unit comprises of ellipsoidal shaped pan fabricated using stainless steel sheet and mounted on the gearbox shaft, which is driven by an electric motor. These tablet coating pan are available in standard and GMP model with SS 304 or 316 contact parts.   Our manufacturing Capacity of Multimill is as per below list.  ​ Lab Model: 5” (1.5kg) Production model: 20kg. To 250kg.  

Cage blenders or Container tumblers are used mainly for blending of dry powders for tablet production and capsule, which facilitates better flow for tablets and capsules.​   Our manufacturing Capacity of Multimill is as per below list.  ​ Lab Model: 5L (3kg) Production model: 100L. To 1500L  

Auto coater machine is widely applicable for the purpose of coating pallets, granules and tablets. Auto coaters are manufactured with the highest standard of GMP regulation using S.S.316, having userfriendly software and operated through PLC to maintain uniformity of coating and Elimination of manual reference and coater's expertization. The main application is Film coating with organic solvent / Film coating with aqueous coating and Sugar coating. Auto coater machine is In built with Auto spray stop in case of disturbance in pan drive to protect tablets or granules from any damage due to system failure. The Pan cabinet is absolutely air tight and ensures no pollution in production environment. Auto coater machine has excellent mixing and tumbling operation by special design of baffles to prevent chipping of tablets. Auto coater machines are available in capacities of 3 to 350 Kgs.    Our manufacturing Capacity of Multimill is as per below list.   Lab Model: 12” (0.6kg) with interchangeable pan 15” (3kg)  Production model: 30kg. To 300kg.