Tableware Dealers in Ankleshwar

we are one of the prominent manufacturer and supplier of the superior quality Ladder Type Cable Tray. Omkar Composites make Cable Tray of high quality fiberglass materials and are available in various length, width, height and thickness as per precise requirement of the clients. The offered FRP Cable trays are constructed optimum quality raw materials in compliance with ISO 9001:2008 standards. These cables Tray are built as in the form of a ladder with two long sideways with consistent welds.  Due to high features such as easy installation, fine finish, durability, corrosion resistant, low maintenance cost these is widely used in the market. The offered products are widely used in various applications like power and control cables, industries, high corrosive environment etc.  Additionally we offer this FRP ladder Cable tray at market leading prices.

Cable Trays are available in different sizes as per the customer specifications. We manufacture cable trays in the following thicknesses - 1.2 mm, 1.5 mm, 1.6 mm, 2.0 mm, 2.5 mm, and 3.0 mm & width - 50 mm to 1000 mm, cable trays are available in different finishes like Hot dip galvanized, Pre galvanized, powder coated, painted etc. The cable tray accessories for perforated ladder type cable trays are vertical bends, horizontal bends, inside bends, outside bends, reducers with radius 300, 600, 900 are avaialble.

Ideal for cooking bulk food, boiling liquids and preparing sauces, etc. Constructed from 3 layers of metals cladded together - 304 Stainless Steel + Aluminium + Stainless Steel. Combination of Stainless Steel Cast and Wood Texture Phenolic Handle makes it a Stay-Cool. Glass Lid with double lip rim preserves moisture. Handles are fastened with solid Stainless Steel rivets. Works on Induction top and all other heat source top.

We are the acclaimed Suppliers of Stainless Steel Plates. The Stainless Steel Plates, we offer has 1mm to 50mm thickness with 500mm to 1500mm length. Our Stainless Steel Plates of 200mm to 6000mm are available in different grades namely 304, 304l, 309, 310, 310s, 316, 316l, 316ti, 317l, 321, 410, 420, & 430. We offer Stainless Steel Plates at the reasonable prices. Availability : Grades of 200mm to 6000mm are available in 304, 304l, 309, 310, 310s, 316, 316l, 316ti, 317l, 321, 410, 420, & 4301mm to 50mm thickness with-500mm to 1500mm length

Float glass (also called “flat” glass) that has not been heat-strengthened or tempered is annealed glass. Annealing float glass is the process of controlled cooling to prevent residual stress in the glass and is an inherent operation of the float glass manufacturing process. Annealed glass can be cut, machined, drilled, edged and polished. Heat-Strengthened Glass Heat-strengthened (HS) glass has been subjected to a heating and cooling cycle and is generally twice as strong as annealed glass of the same thickness and configuration. HS  glass must achieve residual surface compression between 3,500 and 7,500 PSI for 6mm glass, according to ASTM C 1048. Please contact Guardian regarding thicker glass standards. HS glass has greater resistance to thermal loads than annealed glass and, when broken, the fragments are typically larger than those of fully tempered glass and initially may remain in the glazing opening. Heat strengthened glass is not a safety glass product as defined by the various code organizations. This type of glass is intended for general glazing, where additional strength is desired to withstand  wind load and thermal stress. It does not require the strength of fully tempered glass, and is intended for applications that do not specifically require a safety glass product.  HS glass cannot be cut or drilled after heat-strengthening and any alterations, such as edge-grinding,  sandblasting or acid-etching, can cause premature failure. Tempered Glass Fully tempered glass is approximately four times stronger than annealed glass of the same thickness and configuration, and residual surface compression must be over 10,000 PSI for 6mm, according to ASTM C 1048. Please contact Guardian for thicker glass standards. When broken, it will break into many relatively small fragments, which are less likely to cause serious injury. Tempered glass is often referred to as “safety glass” because it meets the requirements of the various code organizations that set standards for safety glass. This type of glass is intended for general glazing, and safety glazing such as sliding doors, storm doors, building entrances, bath and shower enclosures, interior partitions and other uses requiring superior strength and safety properties. Tempered glass cannot be cut or drilled after tempering, and any alterations, such as edge-grinding, sandblasting or acid-etching, can cause premature failure. Laminated Glass Laminated glass is two or more lites (pieces) of glass permanently bonded together with one or more plastic interlayers (PVB) using heat and pressure. The glass and interlayers can be a variety of colors and thicknesses designed to meet building code standards and requirements as necessary. Laminated glass can be broken, but the fragments will tend to adhere to the plastic layer and remain largely intact, reducing the risk of injury.  Laminated glass is considered “safety glass” because it can meet the requirements of the various code organizations that set standards for safety. Heat strengthened and tempered glass can be incorporated into laminated glass units to further strengthen the impact resistance. Insulating Glass Insulating glass refers to two or more lites of glass sealed around the edges with an air space between, to form a single unit. Commonly referred to as an “IG unit,” insulating glass is the most effective way to reduce air-to-air heat transfer through the glazing. When used in conjunction with low-E and/or reflective glass coatings, IG units become effective means to conserve energy and comply with energy codes. The most common architectural insulating glass unit configuration is ¼” glass – ½” air space – ¼” glass (6 mm – 12 mm air space – 6 mm).  

Disposable Plastic Plate, Disposable Plastic Cu

Ceramic Tablewar

Sight Glasses, Polymers Ball Valves, Polymers Sheet

Plastic Glass, Wash Tub, Insulated Flasks, Vacuum Flasks, Jug

Stainless Steel Utensils, Textile Machinery Part

Plates, Stainless Steel Products, Tubes, Steel Bars, RODS, Steel Scra

Water Tanks, Paint, Pipeline Fitting

Disposable Paper Plates, Disposable Silver Paper Plates, Paper Dishe

Mirror Glass, Figured Glass, Tuscan Transparent Glas

Marble, Black Marble, Wall Tile

Stainless Steel Plates, Stainless Steel Pipe Fitting

Bronze Water Level Gauge Glass Set, Gas Fired Burne

Cable Trays, Pharmaceutical Machinery, Pulverizers, Storage Tank