Die Casting Dealers

Our supreme knowledge of die-making enables us to produce pressure die casting dies of highest quality. Our experience in this field runs deep and we use the best of the raw materials available in the industry for enhanced life of the dies. Our dies also come with specialty coatings on request for extended durability and trouble free runs. We make PDC dies for- a) Aluminum cold chamber die casting machinesb) Aluminum hot chamber die casting machinesc) Zinc cold chamber die casting machinesd) Zinc hot chamber die casting machinese) BRASS -squeeze die casting machines

Pressure Vessels are designed and manufactured by us as per ASME Sec VIII, Div I and IS 2825 requirements in any material as per customer requirement. 100% radiography for all butt welded joint is our specialty. These vessels can be manufactured under third party inspection agencies also.

We supply Graphite dies for vertical as well as Horizontal Non ferrous extrusion machines. We can supply Graphite dies for continuous casting of copper and other non ferrous metals. We supply Graphite crucibles for melting of copper and other non ferrous metals. Typical dies and crucibles for certain applications are here as under. Used for copper Extrusion Graphite Dies are used for copper continuous casting industry. We also provide Graphite crucibles for smelting of copper. Our crucibles have long life, low wear out etc.

 We are committed to manufacturing, supplying wide array of Open Die Forged Components. These Open Die Forged Components are highly appreciated amongst our customers due to their high durability.

When buyers select a process and supplier for the production of an important metal part, they face an enormous array of possible alternatives. A great many metalworking processes are now available, each offering a unique set of capabilities, costs and advantages. The forging process is ideally suited to many part applications, however some buyers may be unaware of the exclusive benefits available only from this ancient form of metal forming. In fact, forging is often the optimum process, in terms of both part quality and cost-efficiency-especially for applications that require maximum part strength, special sizes or critical performance specifications.

Magnesium castings as originally developed by Dr. C. W. Hirt, who is a pioneer in the field of CFD and developer of the Volume of Fluid (VOF) technique.

Our organization is able enough to distribute consignments on schedule due to a productive supply chain network we have. We use premium-packaging materials to safeguard our products from mechanical and environmental conditions. For our patrons, we offer customized packaging solutions as well.   Features : Optimal performance Easy installation Light weight

Sairam Technologies are leading Supplier of Stainless Steel Pressure Vessels. Pressure Vessels efficiently carry out all levels of Non-Destructive Testing (NDT) including Leak fort, Hydraulic Pressure Test, Vacuum Test, Heat Treatment and Proof Load Test. Pressure vessels offered by us can be finished by bead and short blasting, painting, pickling and passivisation, depending upon its size. Further, Pressure vessels are also dealt with glass rubber lined & electro polished. Made Of Stainless steel 304, 304l, 316 316lCarbon steel

Gravity Die Casting is a good casting process for producing smooth and textured, well defined, accurately dimensioned metal parts, this method is also very good process. Our die casting, aluminium gravity die casting and aluminium die casting services are of excellent quality.

We are offering Gravity Die Casting Machine. Tilt pouring reduces turbulence as molten metal enters the die cavity, provides shorter cycle times, and requires less metal for feeding systems. Aluminum castings produced in metal molds have a tighter dendrite structure than castings produced in other processes. In addition, aluminum castings are harder and have better pressure characteristics. Value added options, such as sand cores or cast-in ferrous inserts are quite simple.

In die casting, molten metal is injected into a mold at a high pressure. The pressure can range from about 1,400 psi to as high as 30,000 psi. By pressurizing the mold, the cast object will be more uniform and will display an attractive finish. In many cases very little or no post-casting machining is needed to complete the item. Pressure molding also provides for precise dimensional accuracy that is critical for parts used in products with interchangeable parts.Aluminum, Zinc and Copper alloys are the materials predominantly used in die-casting.Die-casting can be done using a cold chamber or hot chamber process.Die-c In a cold chamber process, the molten metal is ladled into the cold chamber for each shot. There is less time exposure of the melt to the plunger walls or the plunger. This is particularly useful for metals such as Aluminum, and Copper (and its alloys) that alloy easily with Iron at the higher temperatures. In a hot chamber process the pressure chamber is connected to the die cavity is immersed permanently in the molten metal. The inlet port of the pressurizing cylinder is uncovered as the plunger moves to the open (unpressurized) position. This allows a new charge of molten metal to fill the cavity and thus can fill the cavity faster than the cold chamber process. The hot chamber process is used for metals of low melting point and high fluidity such as tin, zinc, and lead that tend not to alloy easily with steel at their melt temperatures.Die casting molds (called dies in the industry) tend to be expensive as they are made from hardened steel-also the cycle time for building these tend to be long. Also the stronger and harder metals such as iron and steel cannot be die-cast.  

      The process is capable of producing high quality castings, usually of aluminum alloys, it can also be used for magnesium and other low melting point alloys. Sand cores can be used to produce complex shapes. It’s of two types: B-Low Pressure Die High Pressure Die Features Brand name: ISI quality items. Capability: We are capable to supply 200/pieces per day as per the clients deal. Place of origin: India Minimum order: 1000 Nos.  

Our company manufactures and supplies Pressure Die Casting Components, which are engineered from fine grade raw material. Our range of Pressure Die Casting Components is applied for a wide range of industrial applications especially in automobile industry. A leading company offers customized solutions for our entire range of Pressure Die Casting Components as per client needs specifications. Our range of components delivers superior performance, efficiency and durability and also able to function under critical temperature conditions.

We offer a complete turnkey solution for creating master patterns and cast copies based on your CAD designs. We not only make high-quality molds but we also offer a full line of finishing services including painting, sanding, pad printing and more. We’ll help you create parts for showroom quality display models, engineering test samples, crowdfunding campaigns and more. Polyurethane vacuum casting is a method for making high quality prototypes or low volumes of parts formed from inexpensive silicone molds. Copies made in this way show great surface detail and fidelity to the original pattern. Advantages Of Vacuum Casting  Low cost for molds Molds can be made in a few days Many types of polyurethane resins are available for casting, including overmolding   Binashree provide a full solution for vacuum casting of plastics & metal with a range of machines, from manual to high capacity computer automated, for the economic production of short run, end use parts and prototypes – up to 50 parts from a single mold. Vacuum casting is used by a range of industries including automotive, medical and scientific, creative and entertainment, and consumer products.

We are the leading manufacturer and supplier of Pressure Vessels used for high pressure application. These Pressure Vessels are made from carbon, steel, stainless steel depending upon customer requirement. Pressure Vessels are welded by qualified welders and tested radio graphically and leak tested as per customer specification. Features: High quality Reliable Durable

    We are way forward in manufacturing and exporting Aluminium& Zinc Die Casting Components across the world. As we ensure faultless quality products, we are entitled to receive considerable appreciation from our customers spread all over the world. This type of die casting is made from tested quality raw material alloys. These castings are tested for dimensions, chemical compositions and mechanical properties to meet our customer’s high standards.

We manufacture and export a wide range of pressure vessels that is manufactured from 300 grade stainless steel, sa 516 gr 70 and carbon steel. Available in various specifications, these meet the demands of chemical, fertilizers, food and dairy, petrochemical, pharmaceutical, chemical, pulp and paper. Food processing · industry segments serviced: chemical, fertilizers, food and dairy, petrochemical, pharmaceutical, chemical, pulp and paper. product range design code asme section viii, div i, pd 5500, ad merkblatter, ped 97/23/ec, is 2825 or any other international standard. capacity upto 500 m3 ( 5,00,000 liters water volume) diameter upto 6 meters shell & dished end thickness upto 100 mm or more weight upto 250 tons length upto 60 meters, with suitable field joints. material of construction carbon steel, ltcs, nace & hic resistant material, low alloy steel for high temperature service (sa 387 gr 11 and gr 22), cladded steel (cs with ss, cupronickel, aluminum nickel bronze, aluminum brass, titanium, inconel and many more), ss (300 & 400 series), duplex & super duplex stainless steel, cupronickel, monel , inconel, nickel & nickel alloys, hastelloy, titanium, aluminum & aluminum alloys

Brass Pressure Die Casting, Magnesium Die Casting, HRCS Casting