HEATCON SENSORS (P) LTD. Mathikere, Bangalore, Karnataka

We offer Base Metal Thermocouples. TYPES: K, J, N, T, E HEATCON standard thermocouple line is used in applications where high reliability is a priority. Our thermocouple line comes with the highest purity MgO insulation to yield maximum EMF stability and minimum drift problems caused by insulation impurities. We have thermocouples available in standard and special calibration limits for types K, J, E, N and T . Upon request we can also custom manufacture all of our probes to meet your special requirements.

We offer Noble Metal Thermocouples. These Thermocouples have been designed for use in oxidizing, neutral and reducing environments. The materials used are of the highest quality, manufacturing standards. Applications in all type of furnaces can be measured with these types of sensors. Temperature ranges to +2700 degree centigrade (R, S, B AND C).

We offer Rtds. Resistance Temperature Detectors (RTDs) are temperature sensors that contain a resistor that changes resistance value as its temperature changes. With a temperature range up to 650°C, RTDs can be used in all applications, but the highest-temperature industrial applications are in motors, generator windings where there is more electrical noise. When made using metals such as platinum, they are very stable and are not affected by corrosion or oxidation.

We offer Tubular Heaters. Heatcon the versatile and economical tubular heating element lends itself to virtually the entire range of immersion and air heating applications. The double-ended electric tubular heaters, with their round cross-sectional geometry, are highly adaptable for bending—especially when bending is performed in the field. Double-ended tubular elements offer various combinations of resistor coils and thermocouples inside one sheath. They have the ability to sense the heater's internal temperature accurately every time, or offer three-phase capability in one element.The resistance wire is centered in the heater sheath and electrically insulated with compacted, high-grade magnesium oxide for superior heating performance. Tubular heating elements have a variety of mounting and termination options making them highly popular among industrial customers.

We offer Flame Proof Heaters. Heatcon flame proof heaters are certified by CPRI and can be used in all applications where flame proof enclosure is needed. Flame proof heaters Features: Up to 1000 kW (larger ratings achieved by a combination of enclosures) Terminal box is certified Temperature classes A,B,C Elements are specially sealed to prevent moisture ingress Elements are individually replaceable on site without the replacing the whole unit. Withdrawable type elements available to facilitate replacement without draining the vessel Suitable and certified for use in high ambient temperatures Anti-condensation heaters fitted if required Elements are manufactured from 8020 nickel chrome resistance wire with high purity compacted magnesium oxide powder sheathed within corrosionerosion resistant tube

We offer High Temperature Furnace. SPECIAL FEATURES: High temperature furnaces with maximum operating temperatures of 1400°C, 1500°C & 1600°C Chamber capacities of 3, 8, 15 & 35 litres Powerful silicon carbide elements located on both sides of the chamber ensure good thermal uniformity Silicon carbide elements can withstand the stress of everyday operation and provide good longevity Hardwearing refractory brick in chamber entrance and hearth provide good resistance to abrasion Elsewhere, lightweight ceramic fibre insulation is used which ensures good energy efficiency and rapid heating Vertical counter-balanced door keeps hot door insulation away from operator Postive break door safety switch isolates chamber from power supply, when the door is opened Double skinned construction allows convection air flow to cool the outer case, Choice of PID controller or programmers

We offer Heater Bank. HEATCON heater bank it is possible to heat air or gases up to 800°C and maintain a uniform temperature throughout the room or chamber. Installation is very simple and efficient.

We offer Thermocouple Connector. HEATCON thermocouple wire connectors are round pin standard size, 2 pole TC connectors designed to connect TC wire or temperature sensor instrumentation with a temperature controller or process control HMI automation panel. They are compatible with any other similarly sized Male, 2 prong thermocouple plug or 2 pin Female thermocouple jack . The female TC jack is Universal and will accept either the mini or standard size male TC plug. Hollow pins of thermocouple compensating alloy are used. This TC connector is also available with a solid 2 pin design. This Ultimate Thermocouple Connector design ideal for fast and easy connection of TC cable or thermocouple wire via a TC cable clamp assembly.

We offer Float Switch. This is an electromechanical device, which can control the level of highly corrosive high temperature liquid or powder. It can also be used for regular applications in storage tanks Available in horizontal and vertical models also (Float and Flange size as per customer’s requirement).

We offer Temperature Transmitter. The Heatcon transmitter is a head mount type of temperature transmitter that accepts thermocouple, RTD, ohm, or DC millivolt input and converts it to a 4 to 20mA DC signal for transmission. The transmitters intended for industrial applications detect the temperature with a Pt100 RTD temperature probe with 2-wire or 3-wire connection. The output signal 4 to 20 mA is provided as temperature-linear. The continuous analog signal path allows for extremely quick output reaction times in the event of a temperature change.