M/s 3R India Richmond Town, Bangalore, Karnataka

We provide best-in class drill bits., Core cutting with fast, clean cutting and drilling in masonry, bricks and blocks, Good quality giving it effective heat resistance.

Suitable for use in solid or hollow substrates. Reliable & Versatile. Suitable for Wood & Chipboard Screws.

Size : M10 to M50

Universal heavy duty anchor with ETA approval for cracked and uncracked concrete. Approved for seismic load applications (M8-M16). Two approved embedment depths. Long thread for flexibility in fixture thicknesses. Special cone angle for quick installation. F120 fire resistance.

Bolts Nuts & Washers are available in a wide variety of sizes, types of screw thread, shapes of head and materials to provide a very commonly used means of fastening components.

Key Features Provides lowest anchorage depth. The taper nut is pulled into the sleeve expanding it when the nut is tightened providing grip. Available Sizes Thread Dia: M6 to M16 Drill Dia(mm): 10 to 22 Sleeve Length(mm): 32 to 75 Taper Nut Length(mm): 13 to 40 Overall Length(mm): 45 to 115  

Taper Nut Sleeve anchor with internal threaded taper nuts for the lowest anchorage depth. When the nut on the stud is tightened, the tapered nut on the other end is pulled into the sleeve which on expanding takes the grip in the wall.

Features Push through installation. The cone helps in expanding the sleeve and fasten to the concrete.   Available Brands Hi Tech Available Sizes Dia: M6 to M24 Length: 50 to 200

Width(mm): 32 to 41 Slot Dia(mm): 10 Thickness(mm): 0.8 to 2.5 Length(mtrs): 2.5

Sleeve Anchor for push through installation. For these anchor cylindrical conical hole is made with an uncut drill bit. The Sleeve is driven or pushed over the cone shaped bolt with a setting tool which takes the grip in the concrete.

Length : 45 to 100

Key Features   Taper Nut Sleeve anchor with internal threaded taper nuts for the lowest anchorage depth. When the nut on the stud is tightened, the tapered nut on the other end is pulled into the sleeve which on expanding takes the grip in the wall.   Available Sizes Size: M6 to M16 Length(mm): 30 to 100      

Key Features Sealants are used in a wide range of industries including construction. Silicone sealants are designed to be used for high-strength weatherproofing, waterproofing, low-modulus weatherproofing, etc.

Key Features 3 Piece Anchors – also known as Rawal Bolts. Cone side is inserted in the drilled hole & when the hexagonal bolt or nut is tightened the three strips held with spring slips on the tapered nut or projection bolts & takes the grip in the concrete. Available Sizes Thread Dia: M6 to M16 Drill Dia(mm): 50 to 150 Body Length: 50 to 150 Depth of Hole(mm): 50 to 100  

Width(inch): 4 to 48 Depth(inch): 1 to 6 Thickness(mm): 1.6 to 3.15

Pipe Clamps   Pipe Clamps Size(inch): 3/4 to 8 Saddle Clamps Size(inch): 3/4 to 30 Universal Clamps Size(inch): 3/4 to 32 Thickness(mm): 1-2   U Bolts   Thread Dia(mm): M6 to M20 Pipe Dia(inch): 1/2 to 24    

Hit Type Anchor or Hammer Driven Anchor. Hammer driven pin type anchor for push-through installation. The shell of an anchor is driven into the hole without the expansion pin. Then the expansion pin is driven into the shell which after being hit expands the shell against the concrete.

The Nylon anchor is a nail drive anchor with a body formed from engineered plastic and drive nails available in carbon and stainless steel. The anchor can be used in concrete, block, brick or stone. The anchor is pre-assembled with either a carbon steel or stainless steel nail.

Mechanical anchors are fully-threaded, torque-controlled wedge expansion anchor designed for consistent performance in cracked and un-cracked concrete. These anchors are easy to install and suitable for a variety of base materials with a nominal drill bit size; the size of anchor diameter.

Key Features Designed for use in concrete & solid brickwork. The shield expands to secure & anchor heavy weight fixtures in solid walls. Available Sizes Thread Dia(mm): M6 to M12 Length(mm): 28 to 50

For immediate high strength loading in different base materials. ETA approval for cracked and uncracked concrete. Heavy duty washer for optimal clamp down. Plastic retainer prevents loosening in transit.

Features Quick and easy install. Expands by hammering or screwing. Suitable for all types of solid masonry.

Size : M6/10x35, M6/35x60, M8/45x80, M8/60x100

Thread Size(mm): M6 to M42 Length(mtr): 1 - 3 Weight: 165 gm to 4.65 kg

Key Features European technical approval according to ETAG 020. Universal frame fixing with countersunk head and zinc plated screw for fixing wooden structures. F90 fire resistance approval.

Size : M10 x 100, M10 x 120, M10 x 140

Number Of Flower : Countersunk & Hex Head

Key Features Three Shield Anchor Eye Bolt. Cone side is inserted in the drilled hole & when the hexagonal bolt or nut is tightened the three strips held with spring slips on the tapered nut or projection bolts & takes the grip in the concrete. Available Sizes Thread Dia(mm): M6 to M12 Depth of Hole: 28 to 50  

Zinc plated, stainless steel & hot dip galvanized internally threaded expansion anchor. Easy to install anchor with ETA approval for uncracked concrete and approval for cracked concrete (zinc plated & stainless steel only). Non-lip for invisible coverage with mortar after use. F120 fire resistance.