Pneumatic Tools Dealers in Nandini Layout, Bangalore (36 products available)

Our team of quality analysts strictly tests each product against varied quality parameters ensuring zero defects at buyer's end. Supported by an industrious network, our organization is able to serve to patrons all over Bengaluru(India) and other marketplaces without problem.

We are counted amongst the prominent Manufacturers, Exporters & Suppliers of Cut Off Wheel. Our Cut Off Wheel can efficiently slice through metals, refractory bricks, stone, reinforced concrete and masonry stuffs. We offer Cut Off Wheel under three brand names i.e. MIPOX Eco, MIPOX Pro & MIPOX Plus. Features Offers fast cuts and long life on steel, structural steel and cast iron.Double reinforced for added safety and better cutting Efficiency. Applications Investment castingsSteel manufacturingWelding and constructionFoundry & Metal fabricationPipe manufacturingCutting masonry, concrete, stone and nonferrous metals.

• Type: coil nailer
• Brand Name: jit korea
• Shank Diameter: piain ring scrwe
• Model Number: jn55c
• Place of Origin: korea
• gree: red

jit coil nailer made in korea jn 55c jn 70c jn80c jn100c stepler coil nails nails remover manufacturer coil nails

• Size: 280x160x190 mm
• Strap Width: 13 - 19 mm
• Strap Thickness: 0.8 - 1 mm
• Tension (kg): 70 - 150

Other Details: Friction weld handy pneumatic tool for baling and pallet strapping Conveniently placed separate lever for tensioning and sealing operation

Marson® brand offers a full line of blind rivets and threaded inserts in a wide variety of materials. Products include standard open-end rivets, as well as Specialty Rivets, including Closed-end, Multi-Grip and Plastic rivets. Threaded Inserts round out the product line, complimented by a full array of Manual and Air Tools. Many fasteners are offered in kit form with tools as well!

• Brand Name: Bosch
• Bit Holder: 1/4
• Battery Voltage: 18 V
• No load speed: 0 - 2.800 rpm
• Length: 158 mm
• Torque Max: 180 Nm
• Scope of Supply: 2 x 4 Ah Li-ion batteries; 1 charger; Carry case
• Rated Impact Rate: 0 - 3200 bpm
• Part Number: 06019B91F0
• Height: 240 mm

• Capacity: Bolt: 12 - 22mm (15/32 - 7/8
• High Tension Bolt: 12 - 16mm (15/32 - 5/8
• Drive: 12.7mm (1/2
• Tightening Torque: 480Nm (4,250in.-lbs.)
• Battery Voltage: 18V

For 12.7mm (12") square bit shank Powerful tighteningloosening torque 480Nm (4,250in.-lbs.) in comparison with Hitachi cordless impact wrenches High capacity 4.0Ah Lithium-ion battery provides longer runtime per charge than 3.0 Lithium-ion battery Two combinations of battery and charger* [Charging time: Approx. 60min. (BCL1840) 45min. (EBM1830)] Forward-reverse rocker switch LED light on body Cassette Lithium-ion battery BCL1840 (4.0Ah) or EBM1830 (3.0Ah), and charger UC18YRL

• No-load speed: Power mode 0 - 2,600/min / Save mode 0 - 2,000/min.
• Brand Name: Hikoki
• Battery Voltage: 14.4V
• Weight (Kgs): 1.6kg (3.5 lbs.)
• Capacity: Bolt 10 - 16mm (3/8 - 5/8
• Drive: 12.7mm (1/2
• Torque Setting: Power mode 235Nm (2,080 in.-lbs.) / Save mode 130Nm (1,150 in.-lbs.)
• Model: WR14DSDL

• Type: Spray Gun
• Working Pressure: 40 psi
• Handle Material: SS
• Nozzle Size: 1.4 mm
• Cup Size: 600 ml

Pneumatic nailers use compressed air to power the tools. For the last few decades,  they have been a mainstay in shops and on job sites all across the country. Pneumatic nailers have been developed for every phase of construction from framing and sheathing to roofing and finishing. Pneumatic nailers have very specific requirements for their fastener arrangements. Fastener magazines can be configured as either coils or sticks. Coil magazines hold many more fasteners without reloading. Stick magazines come either as straight or diagonal configuration, and the collation (the way the nails are attached to each other) can be paper, plastic or wire depending on the brand. Ring’s End carries a variety of nailers from a wide selection of manufacturers, as well as the fasteners for each of those nailers. A pneumatic coil nailer comes in handy for work on the roof. This is a small pistol-shaped tool that helps you drive in fasteners. It is also known as a roofing nailer due to its heavy application in roofing jobs. The nailer is also useful for jobs on exterior drywall. Regular roofing nails cannot be used in the nailer but you must use nails that come on a coil. Although various tools are involved in roofing projects, the coil nailer has several advantages as outlined below.   Ease of Use The coil gun is a small, compact tool. This makes it easy to work with. It also assists in portability. When you have to work in confined spaces, the small size of the tool makes it easier to operate. It eliminates much of the effort and strain associated with a hammer. You need not exert yourself as much physically. This reduces the incidence of fatigue. Most models of the coil gun incorporate an ergonomic handle. This gives you the best grip as you work. It also allows you to work more comfortably.   High Performance The coil nailer is a pneumatic tool fuelled by compressed air. This gives it a high power output. It allows you to drive in fasteners into shingles much faster than using a hammer. Besides the speed, it also does an accurate job. Once installed, fasteners remain securely in place. You’re unlikely to do repair work soon if a coil gun is used for the job. This contributes to the longevity of your roof. However, if a hammer is used, not only is more time and effort called for, but the shingles may not remain secure for long.   Versatile Most pneumatic coil nailers have a depth-of-drive dial feature which allows you to select the desired depth for the job. Whether you need to countersink the fasteners, shallow drive or to flush mount, the coil gun makes it easy to do so. Most models accept nails that vary in length. These may range from ½-inch to under 2 inches. It gives you more flexibility in your work. Many models also have a zero nail lockout feature which keeps you from dry firing once the magazine is empty. Skid plates on the tool help keep the tool in place when placed on the roof.   High Holding Capacity The pneumatic coil gun has a higher holding capacity for fasteners than most tools. The magazine can accommodate up to 150 coil nails. Once fully loaded, you won’t have to reload frequently. This causes fewer disruptions as you work. It reduces on downtime and helps sustain your focus. The tool lets you know when you need to reload. Not much time and effort is involved when you have to reload. This contributes to the smooth flow of work. It also enables you to complete work faster.   Durable The pneumatic nailer is a dependable tool for roofing work. It has minimal maintenance requirements, which adds to its durability. When well taken care of, the tool can last several years in good condition. Pneumatic nailers have the housing made of durable metal such as magnesium or aluminum which adds to durability.

high pressure spray guns, Powder Coating System

Ionising air nozzles provide a shower of ionised air to remove electrostatic charges and/or clean parts and components. The Valstat® IN 10 ionising air nozzle has ionising (ionizing) electrodes positioned in the air flow path, which convert ordinary compressed air into an ionised air shower. Positive and negative ions in the shower of air effectively neutralize electrostatic charges on the target and the air shower also cleans the target. This is useful in applications where sheets, bottles, containers, components made of plastic or paper are manufactured or processed. The Valstat® IN 10 G ionising air gun is also offered by Valence; the IN 10 G is a combination of an air gun and an ionising air nozzle. Electrical input to Valstat® ionising nozzle and air guns is from a Valstat® PS 70 R power source. Air inlet is to be provided from the shop floor compressed air source Stable HV output, with in-built current limit 230 V, 50/60 Hz, single phase input Standard 3 m HV interconnecting cable with HV connectors Compressed air input up to 30 psi Quick coupler – 6 mm – 30 psi compressed air input Engineering plastic with epoxy mould construction Compressed air input through R1/4 pipe thread Shock-less; no damage when electrodes are earthed Three HV output connectors Compact, dust-proof, and rugged construction 2 m input cable with built-in fuse and power switch Mild steel fabricated, powder coated enclosure

• Drive size: 1 /2" to 1"
• Max torque: 230 nm
• Handle type: Pistol
• No Load Speed (rpm): 1000 to 3000
• Max. air pressure: 90 psi
• Clutch type: 2-jaw clutch
• Model: UDP-A80MC
• Air inlet (npt): 1/4

• Air Pressure (psi): 50-100 psi
• Stapling Capacity: 190 pins
• Air Inlet (NPT): 1/4
• Gauge: 21 gauge
•  Crown:  1

• Feature: Fine finish, Strong construction, Great strength.

• Weight: 1.7 kg
• Model Name/Number: R2B1
• Brand Name: Lobster
• Stroke Length: 25 mm
• Packaging Type: Box
• Riveting Cycle Time: 0.8s
• Dimension: 307 x 76 x 261 mm
• Frame Dead Diameter: 21 mm
• Minimum Corner Work Distance: 26 mm
• Motor Power: 18V brushless
• Maximum Output: 10.5 kN

• Brand Name: MAT MARVEL
• Model: Pneumatic
• Torque: 583 - 1112 (Nm)
• Item Weight: 1.2 - 2.0 (Kg)
• Length: 153 - 236 (mm)
• Free Speed: 7000 - 11000 (RPM)
• Air Inlet: 1/4"
• Hose Size: 10 (mm)

We are the leading manufacturers, exporters and supplier of this products.

ANEST IWATA automatic spray guns are available in various configurations to suit a wide range of applications and processes. Our compact size SGA100, small size WA100/LPA100 and the full size WA200/LPA200 allow end users to accommodate multiple applications. The WA100/200 and LPA100/200 series gunís fluid passages are made of stainless steel and are suitable for spraying waterborne and solvent borne materials consistently. Our WRA100, WRA200 and LRA200 series guns are designed for remote fan control and fluid circulation for specific materials that rapidly settle and require continuous circulation. ANEST IWATA automatic spray guns are suitable for mass production with automatic painting equipment, reciprocators or robotic painting.

Other Details: Friction weld handy pneumatic tool for baling and pallet strapping Conveniently placed separate lever for tensioning and sealing operation Specifications: Strap Width: 13 to 19 mm Strap Thickness: 0.8 - 1.0 mm Size (mm): 280 x 160 x 190

We manufacture a comprehensive array of high quality ODEX bits , heavy duty ODEX Bits, and ODEX hammers . These products are fabricated utilizing higher grade steel alloy, in distinctive diameters. These ODEX hammers and Bits are offered in various models and styles for suiting the particular drilling condition under varied operation level.

• Color: Black
• Material: Plastic, Metal
• Application: Car Washing
• Weight: 0.83 kg
• Cleaning: Cold Water Cleaning
• Temperature: A60 deg C-140 deg F

• Features: Perfect balance, comfortable handle and trigger action makes them easy and non-tiring to operate, Supplied with a 0.57 lit. gravity cup
• Air pressure: 2.1 2.8 kgs/sq.cm. (30 to 40p.s.i.).

Air impact hammer, Sand Rammer, Pneumatic slides

From storage tanks to material producing processes in automatic factory. They require different piping, horozoutal ,conveyor, weighing, arrangement , separate ,coding, life testing equipment dust ,collecting, and main in process automation. Material characteristic (moisture, s.g., size ) and equipment design (shape, stuff ) usually lead to accumulated or even decreasing material delivery flow problems in working flows.

We deals in supplying of wide range of Pneumatic Tools.

Spray Guns, liquid spray painting system

pneumatics tools, Lubrication Equipment, Chilling Plants, Air Cooling Units

HeliCoil Tang Break-Off Tool, helicoil thread plug gauges

Spray Guns, Spray Nozzles, automated spray system, Heated Spray System