3 Piece face gear allows turret to be indexed without lifting.
Totally enclosed robust mechanism with grease lubrication.
Absolute encoder for position feed back.
Provision for internal coolant supply.
3 Piece face gear allows turret to be indexed without lifting.
Totally enclosed robust mechanism with grease lubrication.
Absolute encoder for position feed back.
Provision for internal coolant supply.
VDI tool holders are made as per DIN 69880.
Tool holders are made by toughened steel C-45 as well as case hardened steel 20 MnCr5.
Our standard supply will be in toughened steel C-45 for form A, B, C, D, E1, E2 & Z varieties.
Shank white, teeth white, tool holder seating surface white will be given on request.
The tool holder shank portion are treated to 58+2 HRC, and the teeths are ground.
VDI tool holders are made as per DIN 69880.
Tool holders are made by toughened steel C-45 as well as case hardened steel 20 MnCr5.
Our standard supply will be in toughened steel C-45 for form A, B, C, D, E1, E2 & Z varieties.
Shank white, teeth white, tool holder seating surface white will be given on request.
The tool holder shank portion are treated to 58+2 HRC, and the teeths are ground.
Suitable for BTP series turrets.
Available in slotted and VDI varieties for 8/12 station turrets.
Special Tool Discs supplied on request.
Tool holders available with provision for internal coolant supply for tools with through coolant.
Suitable for BTP series turrets.
Available in slotted and VDI varieties for 8/12 station turrets.
Special Tool Discs supplied on request.
Tool holders available with provision for internal coolant supply for tools with through coolant.
Umbrella type suitable for VMC (Vertical Machining Center)
Tool shank -BT/ISO-40
Magazine capacity of 12,16,20 and 24 tools
Easy to mount on the machine
Umbrella type suitable for VMC (Vertical Machining Center)
Tool shank -BT/ISO-40
Magazine capacity of 12,16,20 and 24 tools
Easy to mount on the machine
BTP turrets use an induction motor drive, and a set of cams to index and clamp the tool disc.
One rotation of the cam shaft completes one indexing cycle, consisting of ‘declamp-index-clamp’ operations. Indexing is step-by-step.
BTP turrets use an induction motor drive, and a set of cams to index and clamp the tool disc.
One rotation of the cam shaft completes one indexing cycle, consisting of ‘declamp-index-clamp’ operations. Indexing is step-by-step.
Servo motor for fast indexing
Hydraulic clamping imparts high locking forces and stability
Turret mounting compatible with 'pragati' BTP series turrets
Servo motor for fast indexing
Hydraulic clamping imparts high locking forces and stability
Turret mounting compatible with 'pragati' BTP series turrets
VDI tool holders are made as per DIN 69880.
Tool holders are made by toughened steel C-45 as well as case hardened steel 20 MnCr5.
Our standard supply will be in toughened steel C-45 for form A, B, C, D, E1, E2 & Z varieties.
Shank white, teeth white, tool holder seating surface white will be given on request.
The tool holder shank portion are treated to 58+2 HRC, and the teeths are ground.
VDI tool holders are made as per DIN 69880.
Tool holders are made by toughened steel C-45 as well as case hardened steel 20 MnCr5.
Our standard supply will be in toughened steel C-45 for form A, B, C, D, E1, E2 & Z varieties.
Shank white, teeth white, tool holder seating surface white will be given on request.
The tool holder shank portion are treated to 58+2 HRC, and the teeths are ground.
Highest Tensile Strength of 40kgf/mm2 and better impact properties.
Finish machined on HI-Precision machining centers.
Interchangable tool holders. No need for in line boring on machine.
Through Collant Boring Tool Holders also available.
Suitable sleeves can be used in BTH for different tool sizes.
Highest Tensile Strength of 40kgf/mm2 and better impact properties.
Finish machined on HI-Precision machining centers.
Interchangable tool holders. No need for in line boring on machine.
Through Collant Boring Tool Holders also available.
Suitable sleeves can be used in BTH for different tool sizes.
Suitable for BTP and HTP series turrets.
Special Tool Discs supplied on request.
Tool holders available with provision for internal coolant supply for tools with through coolant.
Suitable for BTP and HTP series turrets.
Special Tool Discs supplied on request.
Tool holders available with provision for internal coolant supply for tools with through coolant.
Large spindle bearings for High rigidity and premium cutting performance.
Short compact design for more tool lenght available.
External collet nut (ER20, ER25, ER32) for Higher clamping force.
Tool holder with internal coolant supply available.
Each tool holder has a dedicated test program with temperture and noise conditions measured and documented.
Large spindle bearings for High rigidity and premium cutting performance.
Short compact design for more tool lenght available.
External collet nut (ER20, ER25, ER32) for Higher clamping force.
Tool holder with internal coolant supply available.
Each tool holder has a dedicated test program with temperture and noise conditions measured and documented.
Single servo motor for turret indexing and Live Tool drive with DIN 5480 coupling.
Suitable for 'back machining' without loss in performance.
Provision for central supply of high pressure coolant.
Hydraulic cylinder for clamping.
Single servo motor for turret indexing and Live Tool drive with DIN 5480 coupling.
Suitable for 'back machining' without loss in performance.
Provision for central supply of high pressure coolant.
Hydraulic cylinder for clamping.
Large spindle bearings for High rigidity and premium cutting performance.
Short compact design for more tool lenght available.
External collet nut (ER20, ER25, ER32) for Higher clamping force.
Tool holder with internal coolant supply available.
Each tool holder has a dedicated test program with temperture and noise conditions measured and documented.
Large spindle bearings for High rigidity and premium cutting performance.
Short compact design for more tool lenght available.
External collet nut (ER20, ER25, ER32) for Higher clamping force.
Tool holder with internal coolant supply available.
Each tool holder has a dedicated test program with temperture and noise conditions measured and documented.
These Index tables have been developed on the lines of our highly successful BTP-series of turrets.
Features include three piece coupling, electrical operation, and encoder feedback.
Indexing positions: 8 or 12
Repeat positioning accuracy:+ 2"
Indexing time for 45°: 0.5 sec.
These Index tables have been developed on the lines of our highly successful BTP-series of turrets.
Features include three piece coupling, electrical operation, and encoder feedback.
Indexing positions: 8 or 12
Repeat positioning accuracy:+ 2"
Indexing time for 45°: 0.5 sec.
5 Models covering a range of bore capacitors.
Compact design with aluminum cylinder for low moment of inertia.
Fitted with built-in. pilot operated check valves to retain pressure in the event of hydraulic failure.
Supplied with coolant collector and stroke-sensing proximity switches.
Working pressure up to 40 bar.
5 Models covering a range of bore capacitors.
Compact design with aluminum cylinder for low moment of inertia.
Fitted with built-in. pilot operated check valves to retain pressure in the event of hydraulic failure.
Supplied with coolant collector and stroke-sensing proximity switches.
Working pressure up to 40 bar.
2 piece face gear coupling allows the tool disc to be indexed without lifting.
Parallel index cam mechanism driven by Hydraulic motor ensures smooth and fast indexing of heavy tool discs.
Hydraulic cylinder for turret clamping
2 piece face gear coupling allows the tool disc to be indexed without lifting.
Parallel index cam mechanism driven by Hydraulic motor ensures smooth and fast indexing of heavy tool discs.
Hydraulic cylinder for turret clamping
Driven servo motor for turret indexing and Live tool drive with DIN 5480 coupling.
Suitable for 'back machining' without loss in performance.
Provision for central supply of high pressure coolant.
Driven servo motor for turret indexing and Live tool drive with DIN 5480 coupling.
Suitable for 'back machining' without loss in performance.
Provision for central supply of high pressure coolant.
BTP turrets use an induction motor drive, and a set of cams to index and clamp the tool disc.
One rotation of the cam shaft completes one indexing cycle, consisting of ‘declamp-index-clamp’ operations. Indexing is step-by-step.
BTP turrets use an induction motor drive, and a set of cams to index and clamp the tool disc.
One rotation of the cam shaft completes one indexing cycle, consisting of ‘declamp-index-clamp’ operations. Indexing is step-by-step.
Highest Tensile Strength of 40kgfmm2 and better impact properties.
Finish machined on HI-Precision machining centers.
Interchangable tool holders. No need for in line boring on machine.
Through Collant Boring Tool Holders also available.
Suitable sleeves can be used in BTH for different tool sizes.
Highest Tensile Strength of 40kgfmm2 and better impact properties.
Finish machined on HI-Precision machining centers.
Interchangable tool holders. No need for in line boring on machine.
Through Collant Boring Tool Holders also available.
Suitable sleeves can be used in BTH for different tool sizes.
Single servo motor for turret indexing and Live Tool drive with DIN 5480 coupling.
Axial tool mounting.
Provision for central supply of high pressure coolant.
Hydraulic cylinder for clamping.
Single servo motor for turret indexing and Live Tool drive with DIN 5480 coupling.
Axial tool mounting.
Provision for central supply of high pressure coolant.
Hydraulic cylinder for clamping.
Drum type suitable for HMC
Suitable for fitment on side of the machine column of Horizontal machining centers.
Magazine capacity of 20, 24 and 30 tools.
Taper options: BT/SK/ISO/CAT/HSK
Drum type suitable for HMC
Suitable for fitment on side of the machine column of Horizontal machining centers.
Magazine capacity of 20, 24 and 30 tools.
Taper options: BT/SK/ISO/CAT/HSK
Secondary Business TypeManufacturer / Exporters / Wholesale Suppliers
Opening Hours
SUN : Closed
MON : 9:30 AM - 6:30 PM
TUE : 9:30 AM - 6:30 PM
WED : 9:30 AM - 6:30 PM
THU : 9:30 AM - 6:30 PM
FRI : 9:30 AM - 6:30 PM
SAT : 9:30 AM - 6:30 PM
Pragati was setup in 1977 for manufacturing machine tool accessories. Its early products included Copy turning attachments, Copy milling valves, and Chucking Cylinders. It produced ‘BTP’ Bi-Directional Tool Turrets in year 1990. These are electro mechanical turrets. These turrets have found acceptance all over the world. So far, Pragati has produced 45,000 BTP turrets out of which 16,000 turrets are working outside India. Presently, Pragati produces a wide variety of turrets, including hydraulic turrets, servo turrets and power turrets. Pragati also manufactures related products like Tool Discs, and Tool Holders. Apart from turrets, Pragati is known for its Automatic Tool Changers (ATC) for machining centres. 75% of its ATC production is exported. Main market is Germany and other European countries like Italy, Austria, Switzerland and Spain. Today, Pragati has 3 manufacturing plants in India and fourth plant has recently started operation in China. It has service centres in Germany, Poland, U.K and China.
Reviews & Ratings
Write a Review
Post Free Ad