S P SHUTTERING GROUP Atibele, Bangalore, Karnataka

Mild Steel Channels are one of the finest quality of MS steel and are widely used in the automotive and fabrication industry. They are mainly used in the manufacturing of , factory sheds, shipbuilding, buses, construction of bridges and other engineering structural constructions.

Country of Origin : Made in India

Material : Mild Steel

Application : Construction

The Top Cup Is Designed And Manufactured Using Superior Quality Raw Material In Accordance With Industry Norms. It Is Typically Made Of Mild Steel Or Iron

Material : Mild Steel

Application : Making Cuplock Vertical / Construction Building

A swivel coupler is a type of mechanical coupler that allows for rotational movement between two connected objects. It is designed to allow for angular motion between the two objects, while still maintaining a connection between them. It is used to tighten the scaffolding pipes, Go Go nut, Joint pin, Tie rod, C Clamp, Ahead, Go go jockey, Jick, and saw. These all are used for centering purposes

Material : Mild Steel

Usage : Go Nut,Joint Pin,Tie Rod,C Clamp Etc

Country of Origin : Made in India

S P SHUTTERING GROUP-Offering Iron Scaffolding U Shape Plate, Size: 75x100x75x6 MM. Its used for Making U jack

Application : Construction Site

Size : 75x100x75x6 MM

Material : Mild Steel

Spigot pins are generally used as the joining element in the cuplock system. This small-sized joint pin is made up of stainless steel or top-grade metal.

Country of Origin : Made in India

Size : 300 Mm

Material : Mild Steel

Sikanja(C Clamp) is used for shuttering formwork, Mainly in column. It hold both the sides of wall of column Shikanja is made up of 40 mm M S Flat which tempered by heat treatment to strengthen Apart from this, offered clamps are available in standard as well as customized

Material : Mild Steel

Usage : Construction Building

Country of Origin : Made in India

We are manufacturer of Formwork Water is avaialble in different weights.We use high quality raw material and modish technology for the manufacturing of these accessories.Moreover, we offer these water stopper at market leading prices.

Material : Stainless Steel

Application : 380,410,460,650GRMs

Surface : Galvanized, Zinc Plating

Country of Origin : Made in India

Wellmade pressed double coupler is one of pressed type scaffold fittings. It is used to fix scaffolding pipes at 90 degrees. Thus, it is also called scaffolding fixed clamps or 90 degrees(right angle) double coupler.

Material : Mild Steel

Application : Fix Scaffolding Pipes

Country of Origin : Made in India

We are the leading manufacturer and supplier of Scaffolding Caster Wheel. There are ball bearings in the pivot mechanism to handle high loading. Locks to prevent wheel pivot and locks to prevent the scaffold caster wheel from rolling. Upper steel body is galvanized

Wheel Material : Cast Iron

The Bottom Cup Is Used At The Lower End Of Vertical Standards (Standpipes) To Secure Them To The Base Plates Or Other Supporting Surfaces

Material : Mild Steel

Shape : Round

Application : Making Standard Vertical Cuplock

Availability : 38g

Material : Mild Steel

Floating anchor nuts work by supporting a threaded rod from the backside. They feature a threaded hole, which is able to move around slightly.Swivel Combination Wing Nut with PlateProduct Introduction: Formwork combination plate nut is a combination formwork accessory with wing nut and waler plate. Both the casted and drop forged combi nuts are available.

Country of Origin : Made in India

Usage : Industrial

Size : 90mm

Material : Stainless Steel

Length : 2.0 Inch

The Cuplock Ledger Blade Is Typically Made From Cast Iron. This Choice Of Material Ensures Strength, Durability, And Resistance To Corrosion

Application : Making Ledger Horizontal 

Size : 2 Inch

Material : Cast Iron

S P SHUTTERING GROUP -We Are Manufacturers of Centering Sheets 2x3 .(Using 2 Mm Thickness JSW Steel Hot Rolled Sheets And Ms Angle 25X25x4mm) with ARC Welding.

Country of Origin : Made In India

Length : 3 Mtr

Thickness : Hr Sheet 2 Mm, Ms Angle 25x25x4mm

Shape : Rectangular

Application : Industrial, Commercial &Building Construction,Construction Work

Number Of Flower : Centering Plates

Material : Mild Steel

We are one of the best Manufacturer, Supplier and Exporter of Prop Nut Handle L & T Type from India.L&T nut is used for prop jack for support

Application : Adjustable Prop Accessories

Feature : 15/17 MM AND 18/20 MM Inch (in)

Material : Mild Steel

Country of Origin : Made in India

Adjustable Prop Leading Manufacturer Of Scaffolding Props Jack, Ms Adjustable Prop, Adjustable Telescopic Props And Telescopic Steel Props.scaffolding Jacks Are Load Bearing Base That Tightly Hold The Vertical Tubes And Aid In Transferring Heavy Weight Of The Structure To The Ground. These Jacks Have Shanks In The Centre, Which Hold Tubes In Place And Helps In Spreading The Load. These Jacks Are Very Easy To Adjust With Fasteners, Functions With Both Arched And Standard And Arched And Work Well Even On Uneven Ground.

Material : Mild Steel

Feature : High Load Bearing Capacity,Resistant To Damage,Easy To Assemble

Application : Construction Building

Country of Origin : Made in India

We Are Manufacturers of Centering Sheets 2x3 .(Using 2 Mm Thickness JSW Steel Hot Rolled Sheets And Ms Angle 25X25x4mm) with ARC Welding.

Material : Mild Steel

Application : Construction Building

Country of Origin : Made In India

MS Scaffolding refers to a range of structures used in construction projects to provide support, access, and safety for workersd in construction projects to provide temporary support, access, and safety for workers

Country of Origin : Made in India

Material : Mild Steel

Packaging Type : As Per Client Require

Number Of Flower : Adjustable

Application : Construction

We Are Manufacturers of Centering Sheets 2x3 .(Using 2 Mm Thickness JSW Steel Hot Rolled Sheets And Ms Angle 25X25x4mm) with ARC Welding.

Country of Origin : Made in India

Material : Mild Steel

Weight : 15.5 Kgs ( +/- 5% )

Shape : Rectangular

Application : Construction

Size : 2X3

We Are A Well-known Manufacturer And Exporter Of A Highly Reliable Array Of Scaffolding And Shuttering Products

Application : Building Construction

Brand Name : Sagar

Material : Mild Steel

Cuplock system - vertical / standard is mainly used to get in scaffolding and shuttering work and also acts as a base structure for Formwork strengthening applications and manufactured from 48.3 mm O.D. tube having cup joints at 500 mm intervals.

Country of Origin : Made in India

Application : Building Construction

Material : Mild Steel

A Moving Scaffold is a temporary structure that is easy to move. It makes use of it’s wheels to allow it to “move” to where it needs to be used. Moving scaffolds do not offer the same stability as a fixed scaffold, but allow the scaffold to be moved to different locations much easier compared to a fixed scaffolding.

We Are Manufacturers of Centering Sheets 2x3 .(Using 2 Mm Thickness JSW Steel Hot Rolled Sheets And Ms Angle 25X25x4mm) with ARC Welding.

Material : Mild Steel

Application : Construction Building

Country of Origin : Made In India

Span, they are an integral structural construction scaffolding components of a construction scaffold, providing support to the overall structure.

Material : Mild Steel

Shape : Pipe

Application : Construction

Brand Name : Mild Steel

Country of Origin : Made in India