Sumaya Hmx Systems Ltd. Peenya, Bangalore, Karnataka

Technical Details  Flyer speed: 1500 RPM Gauge: 220 mm and 260mm Flyer size: 16' x 6" for 220 mm and 260 mm gauge Flyer size: 16' x 7" for 260 mm gauge Number of spindles: up to 192 for 260 mm gauge Number of spindles: up to 208 for 220 mm gauge Staple fibers: up to 63 mm Count range: ne 0.3 to ne 3.0 Draft range: 3.0 to 15.8   Key Features  Four independent drive axis, de-centralised spindle drive motors Intelligent software control EasySpin In built power failure bridging device Frequency invertor controlled suction motor Additional suction system not required for travelling cleaner; direct connection to machine suction system

TeraSpin weighting arms are characterised by their robust design and corrosion resistant finish. Not only are these weighting arms built to last the lifetime of the ring frame or roving frame, but each weighting arm exerts the same load on top rollers irrespective of how long they are in use or at what position in the machine they are fastened. Loading springs used on TeraSpin  weighting arms are pre-calibrated for specified loads for an unlimited period of time. Technical Details  Applications: drafting system suitable for speed frames and ring frames of any make - for cotton,man-made fibres,wool, and blends   Key Features  Single piece ergonomic lifting knob Maintenance-free Choice of load selection on each top roller Reliable loading through proven helical coil springs Easy to remove and mount rollers Consistent results over years of use   Variants for cotton ring frame  PK 2025-1251331 (suitable for short cradle) PK 2035-1251784 (suitable for medium and long cradle)   Variants for worsted ring frame  PK 1601-01 (with Zinc plating) PK 1601-01 NC (with Ni-Cr plating)   Variants for roving frame  PK 1500-0962604 (Zinc plated, 3-roller drafting) PK 1500-0962604 NC (Ni-Cr plated, 3-roller drafting) PK 1500-0962604 NK (Ni-Cr plated, 3-roller drafting with new knob) PK 1500-0962602 (Zinc plated, 3-roller drafting) PK 1500-0962602 NC (Ni-Cr plated, 3-roller drafting) PK 1500-0962602 NK (Ni-Cr plated, 3-roller drafting with new knob) PK 1500-0001938 (Zinc plated, 4-roller drafting) PK 1500-0001938 NC (Ni-Cr plated, 4-roller drafting) PK 1500-0001938 NK (Ni-Cr plated, 4-roller drafting with new knob) PK 1500-0001940 (Zinc plated, 4-roller drafting) PK 1500-0001940 NC (Ni-Cr plated, 4-roller drafting) PK 1500-0001940 NK (Ni-Cr plated, 4-roller drafting with new knob) PK 1600-40 (Zinc plated, 4-roller drafting) PK 1600-40 NC (Ni-Cr plated, 4-roller drafting)

Walchem's WebMaster integrates advanced sensing, instrumentation, fluid handling, and data communication technologies to bring you the most sophisticated cooling tower & boiler controller in the water treatment industry. The simple, intuitive programming makes it easy to configure your WebMaster to control multiple cooling towers, boilers, closed loops, or virtually any water treatment process. It will monitor and control based on a wide range of direct sensor inputs as well as measurement inputs from other devices such as corrosion, level, temperature, and pressure. An extensive assortment of integrated communications and data handling features are included that enable water treatment professionals to provide more effective water management services to their customers. Technical Details  Material of construction: thermoplastic/NEMA 4X; display - 64 x 128 pixel backlit LCD Range: WIND8, WMT, WMB, WM18 pH range: - 2 to 16 ORP range: -1400 mV to1400 mV Conductivity range: 1000 to 10,000 μS/cm   Applications  Cooling tower/boiler controllers Industrial water treatment controllers Disinfection Pools/spas   Key Features  Modbus read/write process management and SCADA system Centralised 24/7 awareness of account status Access live or stored data remotely Ability to connect LIVE to any of your controllers in the field The most advanced cooling tower/boiler controller in the water treatment industry Instant alarm notification via cell phone text message, email, or local alarm relay

KARL MAYER elastane warping machines have a vertical arrangement of the packages hat allows warping finest yarns with gentle yarn treatment. The free yarn run guarantees an easy operation along with highest efficiency. Computer control provides continuous compensation of differences among the yarn packages. The result is a warp beam featuring uniform yarn tensions throughout the yarns as well as identical warp-beam circumferences. In case of a machine stop from top speed to zero, highly-intelligent brake synchronisation systems guarantee a reliable yarn sheet control, while opto-electronic control by camera stops the machine in case of yarn breakage.   Key Features  High performance tensioners High performance main motors

KARL MAYER's warp knitting machines for rigid yarns have perfectly-coordinated creel systems, feeding aggregates, and brake synchronisation that help increase profits. Featuring rapid change-over to different yarn parameters as well as being easy to operate, KARL MAYER's warping machines for rigid yarn grants high efficiency and productivity.Manufactured by: KARL MAYER   Key Features  High performance tensioners High performance main motors  

Swiss-made viscosity measurement and temperature control systems for water and solvent based inks. The values of various parameters are measured direcly in the ink supply line of the printing unit. This viscosity controller works on the dropping body measurement principle. The Fasnacht viscosity controler also has an efficient cleaning system, which ensures that the measuring unit and supply line can be cleaned automatically. The purchase decisions of the modern-day FMCG consumer is dependant largely on the print quality of the packaging material. Uneven colour shades on the printed substrate is a commonly occurring phenomenon, resulting in low quality printed material - which might influence a buyer negatively. Ink viscosity plays a vital role in ensuring uniform colour shades across the printing substrate. Consistent printing and optimum use of ink and solvents can be realised only with stable viscosity.

The Valstat® ionising air knife neutralises static charges and removes dust as parts proceed into the process area by providing an anti-static blanket of high velocity air. This assures quality and minimises rejection rates. Typical examples include automated paint or process lines.   The Valstat® ionising air knife improves quality and minimises rejection rates Typical application areas include: white goods manufacturing; automotive paint shop; automotive accessories paint lines; consumer electronic goods manufacturing; laminates and decor presses; and biomedical equipment lines

Valstat® Contact Web Cleaner is a combination of tacky contact cleaning roller and an adhesive roll with replaceable adhesive sheets. Static charge eliminators, positioned before and after web cleaner make sure that the web entering and exiting is free of static charges.The tacky roller covering is made of a specially designed polymer. This picks up loose dust, dirt and contaminants from moving web and transfers them to a pre-sheeted adhesive roll. The output web is thus free of contaminants. Suitable for various web widths up to 2.5 m Provides economical cleaning options with replaceable tacky roller covering Spare adhesive roll and roll covering easily available Easy integration in restricted spaces Can be mounted on an existing idler roller of the machine

Valflow® ink tanks are round in shape, to improve circulation and eliminate dead spots in corners where heavier materials can drop out and stagnate causing viscosity and colour issues. Customised, and OEM tanks and lids are available on request. Tank capacity is selected based on the amount of ink consumed by the press, length of run, the chamber or ink tray capacity, and the amount of ink that drains back into the tank from the print deck, hoses, and filters once the pump is stopped. Lids have overlapping rims to reduce evaporation and add strength A hinged portion allows easy refilling or taking down manual viscosity readings Holes are provided for return hose and/or bypass Removable spark less castor wheels are offered as an option Fabricated from stainless steel Rolled rim provides reinforcement while eliminating sharp edges Available in capacities of 25, 50 and 100 litres Large handles make lifting easy Low pump-down to reduce ink waste

Valflow® filters can be used on rotogravure printing, coating, and laminating lines to remove contaminants in inks, coats, and adhesives through mechanical (filter mesh) and magnetic means, thus ensuring good print or coat quality. Valflow® filters perform two major functions – circulating along with the ink or coats are contaminants from three major sources: air (that carries dust and fiber), doctor blades (a source of metallic particles), and fluids (that contain undissolved solids and pigments). Valflow® filters capture these contaminants and allow only clean fluid to pass through, thus ensuring good print or coat quality. The standard Valflow® ink filter is designed for centrifugal pumps. For diaphragm pumps, the filter has a built-in surge suppressor function. Key Features  Available in various mesh sizes Surge suppressor model available for diaphragm pump Mechanical and magnetic filtration

TeraSpin upgrade kits offer the twin benefits of enhanced performance with low investment. A viable option adopted by many spinning mills in India and abroad, it improves productivity, quality, and energy efficiency. Key Features  Only few selected parts of the drafting system need to be replaced Fixing of the new drafting components is simple and easy No problem in working and maintenance due to combination of old drafting components with some new drafting components Very short installation time   Variants  Spindle: Spindle with customised design and suitable insert (HF-100/HF-1/HF-21) can replace the existing spindle depending on the requirement PK1500 3/3 and 4/4 drafting system for speed frame PK2025/PK2035 drafting system for ring frame  

Offering the possibility to process a great variety of yarn materials and yarn counts, these machines can manufacture a wide range of products for various fields of application. The HKS MSUS is just the right machine for the production of interlining articles ranging from sheer to thick and sturdy structures, using plain yarns, textured yarns and spun yarns. The fabrics with parallel weft insertion are perfectly suited for making lightweight and yet dense coating substrates.     Technical Details  Application range: interlinings, bandages, adhesive tapes, outerwear, furnishing fabrics, coating substrates   Key Features  Robust, high-speed machine Precise weft insertion system

Combining high production speed and outstanding flexibility, and based on the precise tuning of knitting motion and knitting elements, this 3-bar, high-performance tricot machine is suitable for a wide range of textiles. Besides, being equipped with an extra-fine compound needle system, the HKS 3-1 produces structures showing a delicate and uniform loop appearance. When fitted with an elastane device and an elastic batcher, the higher machine gauges of this type are highly efficient at manufacturing sophisticated elastic articles. In this way, an efficient production of elastic and rigid textiles with small patterns or structures becomes possible.Manufactured by: KARL MAYER   Technical Details  Application range: automotive textiles, home textiles, lingerie, mosquito nets, lightweight coating substrates, sportswear/swimwear, lining fabrics, outerwear, etc. Speed up to 4400 RPM Gauge up to 50 Width up to 220 inches   Key Features  4 bars machines also available in electronic pattern change

The Toyota-Trützschler Comber TCO 12 can run at higher nip rates due to fewer mechanically limiting factors. On the TCO 12 combing machine, gears are replaced with specially designed, highly dynamic servo motors for the frequent reversal of rotation. With the conventional one-sided drive, the detaching rollers are subject to twisting during each reversal of rotation. This results in a certain variation of combing quality between the 8 combing heads. The double-sided drive ensures uniform motion of the detaching rollers on all eight combing points. This reduces the otherwise process-related irregularities. DISC MONITOR, the latest draw frame quality sensor, has also been integrated. DISC MONITOR provides data for automatic self-optimisation of the machine. Due to the individual drive technology of the combing elements, the piecing process, for instance, is automatically optimised. Furthermore, deviations in lap weight no longer present a problem, since sliver count is permanently monitored and corrected when necessary. The Comber TCO 12 features multi-servo combing which reduces vibrations even at high nip rates. The TCO 12 also has a narrow frame, unlike other combers that have a wide oil bath gear.   Technical Details  Cotton fibres Ne 0.2 - 0.1 Number of heads: 8 Nips/min: mechanical up to 600 nips/min Doubling: 8 Sliver count: 3 - 6 ktex (Ne 0.2 - 0.1) Lap diameter: maximum 650 mm Lap width: 300 mm   Key Features  Two highly dynamic synchronised motor drive for detaching rollers Count control levelling system Reduction of torsion by 75% Gears replaced with dynamic servo motors Narrow frame unlike conventional combers with wide bath gear

Each top roller is manufactured such that the clearance between hardened arbour and shell isperfectly matched with appropriately sized double row steel balls. The top rollers made for ringframes and speed frames are injected with just the right amount of special grease – TRG 5.The ends are fitted with a uniquely designed seal to prevent leaks while in operation.   Key Features : Lubricated with special grease TRG 5 Effective U-type seal Through hardening of axle and outer shells Sturdy double row ball bearing

Material : Rubber, Metal

Diameter : 100-200mm

Shape : Round

Application : Textile Industry

Packaging Type : Available in many colors

SymTTex is a renowned BCF extrusion system in the world of carpet manufacturing. SymTTex systems are available in 2-end, 3-end or 4-end designs. These are highly flexible systems and can process a variety of polymers such as PP, PA6, PA6.6 as well as PET primary granules and recycled bottle material. Now, the already optimised installation can be configured even more accurately in terms of product requirements, available space, and other factors. Technical Details  Application range: dyed and undyed from fine dpf to coarse dpf BCF yarn for woven carpet, tufted carpet, as well as automotive applications   Key Features  The system allows a complete, easy, reproducible and performing settings Highest possible process speed with no differences between the positions High crimp, high elongation, with reduced shrinkage and very consistent intermingling Large range of yarn count for each application segment Finer dpf yarns to allow softer touch

The Valstat® TS 10 air ioniser is a table top volume static eliminator that very effectively neutralises unwanted static charges from moving and stationary targets. This model is designed to neutralise your workstation or area with a stream of ionised air and remove static charges from non-conductive objects and isolated conductors. Unwanted static charges – either surface-based and/or airborne – can pose serious problems in various industries and laboratories. Static charges can cause sensitive equipment and electronic components to malfunction and can attract dust and dirt. People can experience uncomfortable electrical shocks when such electrostatic charge levels are high. The Valstat® ionising blower has electrodes positioned in the flow path of an axial fan, thus making available a stream of ionised air. This effectively neutralises static on specific objects rapidly and also controls static in the general area in front. An optional self-balancing model is available for applications that require ESD compliance. Key Features  Dimensions (in mm): 200 × 170 × 110 Weight: 2.75 kg Designed for continuous operation Built-in current limiting facility ensures safe operation Powder coated mild steel cabinet Noise level: 60 dBA at 1 m Air flow: 145 cubic meter per hour Input supply: 230 V AC, 50 Hz, 1 ph, 40 W Ionisation: With built-in electrodes and HV power supply

(Disc diffuser system) The diffusers have special features that improve the operation reliability and efficiency, such as the non-return valve available on all models and the sliding ring available on the latest version of ABS Nopon diffusers. High oxygen transfer efficiency combined with low pressure drops makes the ABS diffusers extremely effective. Technical Details  Range: PIK 300 Size range: 336 mm Air Flow range: 1.5-8 m3/hr Membrane surface area: 0-0.60 m2 Bubble dia.: 1-3 mm Material of construction: main body - polypropylene; wedge piece - polypropylene; membrane disc - EPDM/HDPE; flat seal - EPDM   Applications  Continuous aeration   Key Features  Classic ABS NOPON fine-bubble disc diffuser with an HDPE aeration plate Equipped with a non-return valve Diffuser materials are made of PVC and HDPE Has a double layer disc to achieve top oxygen transfer yield with very low back pressure Equipped with a non-return valve For stainless steel pipes thread attachment is also available

Sulzer abs Venturi Jet Aerator is ideal for applications that require a combination of aeration and mixing. Featuring a standalone, self-aspirating system, the Sulzer abs Venturi Jet Aerator is available with a guide rail and pedestal, for fixed installations or stand for greater portability.  Used for mixing combined with aeration of wastewater containing sewage, offal, organic, industrial effluent, slurry, and the like. This aerator can also be used in cleaning of storm water tanks. Technical Details  Material of construction: venturi chamber housing - C.I GG 20; motor housing - C.I GG 25; impeller - C.I GG 25; pump casing - C.I GG 25; diffuser pipe - SS 304; impeller - SS329 (optional) Head range: 0-16 m Range: 100C CB1 to 200G CB1 Size range: 1.3-18.5 kW Flow range: 50-500 m3/hr   Applications  Aeration and mixing of wastewater in small and medium sized tanks Cleaning of storm water tanks Balancing tanks   Key Features  Standalone, self-aspirating system, with the option of fixed installation with guide rail and pedestal, or portable installation with stand Blockage-free hydraulic design with Contrablock impeller Maximum allowable temperature of the medium for continuous operation is 40°C

Sulzer abs RW mixers have an integral motor and are suitable for agitating, blending, mixing, dissolving and suspension of solids in municipal treatment plants, industry and agriculture. Sulzer abs offers highly efficient multipole and gear driven mixers with either standard or explosion proof motor enclosures. Sulzer abs application support includes literature and computer software for sizing and design of each installation. Technical Details  Material of construction (EC /CR version): EC-cast iron; motor housing - EN-GJL-250 (C.I); propeller - SS 329; CR-stainless steel; motor housing - SS 316; propeller - SS 329 Mixing flow range: up to 6300 m3/h Range: 200-900 Propeller size range: 200-900 mm Size range: 3.0-25 kW   Applications  Prevention of deposits and floating crusts in pump sumps Mixing and stirring applications in sewage treatment plants and industrial areas Homogenisation of highly-concentrated sewage sludge   Key Features  Patented solids deflection ring Modular motor Bearings lubricated for life Blockage-free propeller Adjustable bracket allows direction to be altered Guide rail mounting option Cast iron housing

Ideal for effective sewage removal from apartments, large buildings, and for new or renovated structures, the robust Sulzer abs Piranhamat is designed for low or no maintenance, and can operate with heads of up to 27 m. A variety of inlet port sizes DN 50/100/150 increases its compatibility. Coupled with a simple discharge line connection (by means of the patented quick-coupling system), this makes the Piranhamat a pump that is well-suited for portability. technical Details  Material of construction: tank - polyethylene; motor housing - C.I GG 25; motor shaft - SS 420; Head range: 0-27 m Size range: up to 1 kW Flow range: 0-10 m3/hr   Applications  Removal of effluent from a WC Installation in an existing house or during the renovation of old buildings Where usage is by members of the public and cannot be monitored and more effluent sources are to be connected   Key Features  Compact unit ready to plug in and suitable for direct Eurotoilet connection Automatic level control and alarm Attractive corrosion-resistant synthetic tank Maintenance-friendly unit with easy access lid (no screws) Carbon filter fitted to reduce odours Non-return valve and 2 m cable with Europlug supplied as standard

These pumps are used for abrasive water with solid contents from construction sites and for handling sludge, slurry and such effluents in mining and quarrying operations. They are submersible up to 20 m and have no suction lift limitations. These pumps can be installed vertically, horizontally, or even upside down - depending on the space available. Technical Details  Range: J and JS 5-604 Size range: up to 56 kW Flow range: up to 1220 m3/hr Material of construction: casing/handle/fasteners - SS 304; impeller J5 - polyurethane; shaft - SS 420; impeller J 12 to 84 - white cast iron; impeller J 205 to 604 - hardened chrome steel; castings - aluminium; wear parts - nitrile rubber Head range: up to 103 m   Applications  Handling sludge, slurry, abrasive water with solid contents from construction sites Handling abrasive solids in mining, tunneling operations or at quarries   Key Features  Highly portable pumps with minimal accessory requirement Fully encapsulated motor Installation orientation: vertical, horizontal, or even upside down Submersible up to 20 m depth; no suction lift limitations Robust outer casing and good heat convection Compact design                              

(Submersible mixer) The Sulzer abs flow booster XSB is designed as a compact, water pressure-tight unit including propeller and integrally lockable coupling system. It is equipped with an axially operating 3-blade propellers with very good self-cleaning effect for vibration-free operation. The propellers are designed to achieve high thrusts and therefore, a high flow capacity in axial direction. The patented solids deflection ring protects the mechanical seal from damage by ingress of solids or fibrous matter.  All bearings are lubricated-for-life and maintenance-free, with a calculated life time of more than 100,000 h. Technical Details  Maximum propeller dia.: 2750 mm Range: XSB 900-2750 Size range: 1-7.5 kW Material of construction (with options): motor housing - EN-GJS-400; motor shaft - 1.0060 (ST 60-2); propeller - composite glass (glass fibre, resin, gel coat); propeller shaft - 1.7225 fully encapsulated (42CrMo4) Flow range: up to 22320 m3/hr   Applications  Providing a flow pattern in large tanks and open waters for mixing and stirring Wastewater treatment plants and industrial applications   Key Features  Fully-lockable coupling system High-efficiency IE3 motors Mechanical seal protected by a solids deflection ring Seal monitoring using multiple sensors Thermo-Control System (TCS) provides timely warnings and auto switch-off

Valstat® VC series electrostatic charging systems are compact, sturdy and efficient. Electrostatic charging systems are designed to be used with ± 20 kV, ± 40 kV, ± 60 kV Valstat® PC series high voltage generators. Static generators give stable high voltage DC output even under severe conditions. Together they form an ideal solution for creating a controlled level of static charges that provide temporary bonding between the materials. Valstat® VC linear static charging electrodes are available in two variants; point static chargers and linear static charging bars. Point charging electrodes are suitable for localised charging, edge pinning, in mould labelling applications while linear charging bars are used in stacking, pinning applications. With precision becoming a priority than a luxury in production processes, electrostatic charging systems, a combination of series charging electrodes and series high voltage generators, provide a simple solution for a range of industrial applications.