Genuine Dell OEM system board (motherboard) for PowerEdge 1950 servers, Tested and pulled from a working PowerEdge 1950 server, 2 CPU socket, 8 RAM memory slots (4 banks of 2), 2 Integrated 101001000 Ethernet ports
2 USB ports, 1 VGA port, Integrated Voltage Regulator Modules (VRMs), 32GB maximum memory with current BIOS update.
Genuine Dell OEM system board (motherboard) for PowerEdge 1950 servers, Tested and pulled from a working PowerEdge 1950 server, 2 CPU socket, 8 RAM memory slots (4 banks of 2), 2 Integrated 101001000 Ethernet ports
2 USB ports, 1 VGA port, Integrated Voltage Regulator Modules (VRMs), 32GB maximum memory with current BIOS update.
Operating temperature: 32 to 104°F (0 to 40°C)â Storage temperature: -4 to 149°F (-20 to 65°C)
â Relative humidity: 10 to 90%, noncondensingWarranty : 90 days
The Cisco Fast Ethernet HWICs are single wide interface cards, available as a 1-port HWIC (HWIC-1FE) and as a 2-port HWIC (HWIC-2FE), that provide Cisco modular and integrated services routers with additional Layer 3 routed ports.Specifications
Feature Highlights
The Fast Ethernet routed ports on the HWICs have the same characteristics and features as the on board LAN interfaces for the integrated-services-router platforms. Along with Layer 3 connectivity, such as per-port access control lists (ACLs), routing, and IP addressing, these HWICs provide functions equivalent to those of on board Fast Ethernet routed ports. The following is a partial list of features supported in Cisco IOS® Software for the Fast Ethernet HWICs.
● IEEE802.3 with IEEE802.2 Service Advertising Protocol (SAP)
● IEEE802.3 with IEEE802.2 and Sub network Access Protocol (SNAP)
● IEEE 802.1Q VLAN tagging
● Auto sensing, auto negotiation, and automatic media-dependent interface crossover
● (Auto-MD IX
● Unique MAC address (not shared with any other interface on the router), assigned MAC address to interface, and sub interfaces
● Network Management Features
● CiscoWorks
● Simple Network Management Protocol (SNMP) support
● Cisco NetFlow accounting
QoS Features
● Weighted Random Early Detection (WRED)
● Precedence setting and mapping (802.1p)
● Committed access rate (CAR)
● ACLs
● MAC address filtering
● Extended ACLs
● Voice and remaining QoS features, per platform and per Cisco IOS Software release
Additional Features
● Cisco Group Management Protocol and Internet Group Management Protocol (IGMP) for multicasting
● High availability, supporting Hot Standby Router Protocol (HSRP), Virtual Router Redundancy Protocol (VRRP), and Gateway Load Balancing
Protocol
(GLBP)
● MPLS features as supported by platform
● Generic routing encapsulation (GRE)
● IPv6
● IP Security (IPsec) (crypto map)
● Layer 2 Tunneling Protocol Version 3 (L2TPv3) tunnel termination
● Dynamic Host Configuration Protocol (DHCP) client and server
● Network Address Translation (NAT)
● Generic Traffic Shaping (GTS)
● Media Gateway Control Protocol (MGCP) bind
● IBM features
● Point-to-Point Protocol over Ethernet (PPPoE) client
● Bridging
MIBs Supported by the HWIC-1FE and HWIC-2FE
● ENTITY-MIB
● IF-MIB
● OLD-CISCO-CHASSIS-MIB
● RMON-MIB
● ETHERLIKE-MIB
● CISCO-ENT-ASSET-MIB
● CISCO-ENTITY-FRU-CONTROL-MIB
The Cisco Fast Ethernet HWICs are single wide interface cards, available as a 1-port HWIC (HWIC-1FE) and as a 2-port HWIC (HWIC-2FE), that provide Cisco modular and integrated services routers with additional Layer 3 routed ports.Specifications
Feature Highlights
The Fast Ethernet routed ports on the HWICs have the same characteristics and features as the on board LAN interfaces for the integrated-services-router platforms. Along with Layer 3 connectivity, such as per-port access control lists (ACLs), routing, and IP addressing, these HWICs provide functions equivalent to those of on board Fast Ethernet routed ports. The following is a partial list of features supported in Cisco IOS® Software for the Fast Ethernet HWICs.
● IEEE802.3 with IEEE802.2 Service Advertising Protocol (SAP)
● IEEE802.3 with IEEE802.2 and Sub network Access Protocol (SNAP)
● IEEE 802.1Q VLAN tagging
● Auto sensing, auto negotiation, and automatic media-dependent interface crossover
● (Auto-MD IX
● Unique MAC address (not shared with any other interface on the router), assigned MAC address to interface, and sub interfaces
● Network Management Features
● CiscoWorks
● Simple Network Management Protocol (SNMP) support
● Cisco NetFlow accounting
QoS Features
● Weighted Random Early Detection (WRED)
● Precedence setting and mapping (802.1p)
● Committed access rate (CAR)
● ACLs
● MAC address filtering
● Extended ACLs
● Voice and remaining QoS features, per platform and per Cisco IOS Software release
Additional Features
● Cisco Group Management Protocol and Internet Group Management Protocol (IGMP) for multicasting
● High availability, supporting Hot Standby Router Protocol (HSRP), Virtual Router Redundancy Protocol (VRRP), and Gateway Load Balancing
Protocol
(GLBP)
● MPLS features as supported by platform
● Generic routing encapsulation (GRE)
● IPv6
● IP Security (IPsec) (crypto map)
● Layer 2 Tunneling Protocol Version 3 (L2TPv3) tunnel termination
● Dynamic Host Configuration Protocol (DHCP) client and server
● Network Address Translation (NAT)
● Generic Traffic Shaping (GTS)
● Media Gateway Control Protocol (MGCP) bind
● IBM features
● Point-to-Point Protocol over Ethernet (PPPoE) client
● Bridging
MIBs Supported by the HWIC-1FE and HWIC-2FE
● ENTITY-MIB
● IF-MIB
● OLD-CISCO-CHASSIS-MIB
● RMON-MIB
● ETHERLIKE-MIB
● CISCO-ENT-ASSET-MIB
● CISCO-ENTITY-FRU-CONTROL-MIB
PRODUCT DESCRIPTION
Genuine Dell OEM system board (motherboard) for PowerEdge 1950 servers.
Dell Part Number(s): UR033, 0UR033
Specifications
Tested and pulled from a working PowerEdge 1950 server.
2 CPU sockets
8 RAM memory slots (4 banks of 2)
2 Integrated 10/100/1000 Ethernet ports
2 USB ports
1 VGA port
Integrated Voltage Regulator Modules (VRMs)
32GB maximum memory with current BIOS update
Warranty : 90days
Condition : Used / Pulled
PRODUCT DESCRIPTION
Genuine Dell OEM system board (motherboard) for PowerEdge 1950 servers.
Dell Part Number(s): UR033, 0UR033
Specifications
Tested and pulled from a working PowerEdge 1950 server.
2 CPU sockets
8 RAM memory slots (4 banks of 2)
2 Integrated 10/100/1000 Ethernet ports
2 USB ports
1 VGA port
Integrated Voltage Regulator Modules (VRMs)
32GB maximum memory with current BIOS update
Warranty : 90days
Condition : Used / Pulled
Integrated KVM console featuring a 15" LCD monitor in Slideaway housing, LCD module rotates up to 115 degrees for a more comfortable viewing angle, Supports an external console, Compatible with ATEN KVM Switches and servers, Less than 1U high mountable rack, DDC emulation of the LCD monitor - VGA settings of every connected computer are automatically adjusted for optimal output to the LCD monitor, Multiplatform support: Windows 2000XPVista, Linux and FreeBSD.
Integrated KVM console featuring a 15" LCD monitor in Slideaway housing, LCD module rotates up to 115 degrees for a more comfortable viewing angle, Supports an external console, Compatible with ATEN KVM Switches and servers, Less than 1U high mountable rack, DDC emulation of the LCD monitor - VGA settings of every connected computer are automatically adjusted for optimal output to the LCD monitor, Multiplatform support: Windows 2000XPVista, Linux and FreeBSD.
PRODUCT DESCRIPTION
Dell Adaptec 39160 U160 SCSI Dual-Channel HBA Card Adapter PCI-X
Dell Part Number: R5601,
Tested and pulled from working Dell PowerEdge server.
Used for connecting SCSI external drive enclosures to a host server.
Requires an open PCI-X slot in host server.
Warranty : 90days
Condition : Used / Pulled
PRODUCT DESCRIPTION
Dell Adaptec 39160 U160 SCSI Dual-Channel HBA Card Adapter PCI-X
Dell Part Number: R5601,
Tested and pulled from working Dell PowerEdge server.
Used for connecting SCSI external drive enclosures to a host server.
Requires an open PCI-X slot in host server.
Warranty : 90days
Condition : Used / Pulled
The 3Com 3CR17761-91 Switch 4500G is a stackable 24 port 101001000 Gigabit Ethernet switch that provides secure, flexible LAN connectivity and advanced voice-optimized features such as auto-voice VLAN and QoS. Optional 10 Gigabit uplinks via local connection modules or XFP transceivers supply highest-speed connections to other similarly-equipped devices, 24 auto-negotiating 10BASE-T100BASE-TX1000BASE-T ports, 4 of which are dual-personality 101001000 or SFP Gigabit ports, Wirespeed non-blocking performance: aggregate switching capacity of up to 176 Gbps, Add switches to the cluster when needed without increasing management difficulty and expense and manage all as a single entity.
The 3Com 3CR17761-91 Switch 4500G is a stackable 24 port 101001000 Gigabit Ethernet switch that provides secure, flexible LAN connectivity and advanced voice-optimized features such as auto-voice VLAN and QoS. Optional 10 Gigabit uplinks via local connection modules or XFP transceivers supply highest-speed connections to other similarly-equipped devices, 24 auto-negotiating 10BASE-T100BASE-TX1000BASE-T ports, 4 of which are dual-personality 101001000 or SFP Gigabit ports, Wirespeed non-blocking performance: aggregate switching capacity of up to 176 Gbps, Add switches to the cluster when needed without increasing management difficulty and expense and manage all as a single entity.
Maximum port bandwidth 1.063 Gbitsec line speed, full duplex; 2.125 Gbitsec line speed, full duplex; Auto-sensing of 1 Gbitsec and 2 Gbitsec port speeds; optionally programmable to fixed port speed; Speed matching between 1 Gbitsec and 2 Gbitsec ports
New high availability feature for valueentry switch: Consistent firmware version from entry to enterprise; Hot code activation, Ability to upgrade from base configuration to power pack, Ability to upgrade from 2-switch limit to 4-switch limit, to full fabric, Easily integrated into core to edge SAN Switch configurations, Fully integrated with all HP solutions and products.
Maximum port bandwidth 1.063 Gbitsec line speed, full duplex; 2.125 Gbitsec line speed, full duplex; Auto-sensing of 1 Gbitsec and 2 Gbitsec port speeds; optionally programmable to fixed port speed; Speed matching between 1 Gbitsec and 2 Gbitsec ports
New high availability feature for valueentry switch: Consistent firmware version from entry to enterprise; Hot code activation, Ability to upgrade from base configuration to power pack, Ability to upgrade from 2-switch limit to 4-switch limit, to full fabric, Easily integrated into core to edge SAN Switch configurations, Fully integrated with all HP solutions and products.
DELL 840 DVD ROM IDE INTERFACE 0UD460
The Dell PowerEdge 2950 server uses slimline optical drives. Earlier generations featured CD-ROM, DVD-ROM or CD-RW/DVD-ROM drives with the IDE interface whereas later generation III models were upgraded to the SATA interface to allow for faster SATA connections.
Warranty : 90days
Condition : Used / Pulled
DELL 840 DVD ROM IDE INTERFACE 0UD460
The Dell PowerEdge 2950 server uses slimline optical drives. Earlier generations featured CD-ROM, DVD-ROM or CD-RW/DVD-ROM drives with the IDE interface whereas later generation III models were upgraded to the SATA interface to allow for faster SATA connections.
Warranty : 90days
Condition : Used / Pulled
The Dell PowerEdge 2950 server uses slimline optical drives. Earlier generations featured CD-ROM, DVD-ROM or CD-RWDVD-ROM drives with the IDE interface whereas later generation III models were upgraded to the SATA interface to allow for faster SATA connections.
The Dell PowerEdge 2950 server uses slimline optical drives. Earlier generations featured CD-ROM, DVD-ROM or CD-RWDVD-ROM drives with the IDE interface whereas later generation III models were upgraded to the SATA interface to allow for faster SATA connections.
STORAGE CONTROLLER, Supported Devices disk array (RAID), Data Transfer Rate 150 MBps, RAID Level RAID 10, RAID 5, Interface Type Serial ATA-150, Bus Type 2Gb Fibre Channel, Installed Qty 1, POWER DEVICE, Nominal Voltage AC 120230 V, Frequency Required 5060 Hz, Power Consumption Operational 326 Watt, Hot-Plug hot-plug.
STORAGE CONTROLLER, Supported Devices disk array (RAID), Data Transfer Rate 150 MBps, RAID Level RAID 10, RAID 5, Interface Type Serial ATA-150, Bus Type 2Gb Fibre Channel, Installed Qty 1, POWER DEVICE, Nominal Voltage AC 120230 V, Frequency Required 5060 Hz, Power Consumption Operational 326 Watt, Hot-Plug hot-plug.
PRODUCT DESCRIPTION
Genuine Dell 1x8 SAS SATA backplane board for PowerEdge 2900 servers Part Number(s): KU482, 0KU482 Used to replace a bad backplane or a backplane with failing HD slots. Specifications
Tested and pulled from a working PowerEdge 2900 serverEight (8) slots for up to eight (8) 3.5" SAS or SATA hard drivesNo cables included
Compatible Systems Dell PowerEdge 2900 server (rackmount or tower)
PRODUCT DESCRIPTION
Genuine Dell 1x8 SAS SATA backplane board for PowerEdge 2900 servers Part Number(s): KU482, 0KU482 Used to replace a bad backplane or a backplane with failing HD slots. Specifications
Tested and pulled from a working PowerEdge 2900 serverEight (8) slots for up to eight (8) 3.5" SAS or SATA hard drivesNo cables included
Compatible Systems Dell PowerEdge 2900 server (rackmount or tower)