Telephone Cable Dealers

As a trusted name, we conduct different quality tests at all stages to make sure that our offered range is defect free. As a famed organization in Jalandhar(India), we make sure that our customers will receive their orders at their preferred destination. Features : Precise thickness Impeccable finish Easy to install

JIS05 SMARTPHONE 5 PIN CABLE. • This adapter use quality 56kΩ resistance to protect your devices from damage, Compliant with USB Type-C Specification Release 1.1. section 4.5.3.2.4 • MICRO USB B FEMALE IS THE HOST SIDE, Mostly Connect to a cable ( USB A Male to Micro USB B Male Cable), So USB A Male side actually is the HOST, The USB A Male Side connect with PCComputer, Power Bank, Wall USB Charge Adapter to Charge or Sync data for USB-C Device (Like Nokia N1 tablet etc.) • USB-C (TYPE C) MALE IS TARGET (Device Side)...Connect to Nokia N1 tablet etc. for Charge or Sync Data • CableCreation's Short cable tested Speed is 480Mbts, However the actual Speed expected to be 480Mbts in case of working with the USB A male to Micro USB B male cable from buyer side • REVERSIBLE DESIGNED USB-C PLUG, COMPITABLE with All the device that has USB-C Port , 100% Contact Efficiency • USB 3.1 C type, which can fit into a port whether upside-down or right-side up, it is like the Apple Lightning connector, reversible. • Super speed USB (10 Gbps), USB power delivery and the actual USB type-C connector • An entirely design tailored to work well with emerging product design • New smaller size-: similar in size to existing USB 2.0 micro-b • Usability enhancements: users will not no longer need to be concerned with plug orientationscable direction, making it easier to plug in • The type C connector and cable will support scalable power charging • Scalability: the connector design will scale for future USB bus performance • anti slip brass sheet head nickel plated • magnetically shield for high speed

DESCRIPTION: Annealed bare electrolytic copper conductor, PVC PE insulated, twisted into pairs, laid-up, filled with petroleum jelly dry core, polyester paper taped, poly-al tape (screened unscreened), PVC PE FRLS sheathed cables. SPECIFICATIONS: DOT Specs International Specs.

We are offering telephone cable. Telephone & switch board cables are widely used today for communication in high rise buildings, offices, factories, hotels, hospitals, residential complexes etc. & have gained confidence, support and vast goodwill among users. Only high conductivity electrolytic arade annealed tinned solid copper conductor with nominal dia. Of 0.5, 0.6 & 0.7mm is used for best performance. Suitable for indoor telephone wiring, switch boards and intercoms, these wires are tested at 2000 volts.

Solid Annealed Copper, Polythene Insulated Petroleum Jelly Filled Poly-Al Laminated Moisture barrier,Polythene Sheathed Unarmoured/ Armoured Polythene jacketed as per DOT specification   Application   This type of cable is meant for inter exchange and for local network use. This cable may be unarmored/armored type   Features   Ideally suited for extreme hot & cold weather condition Ideal for water logging areas Highest clarity in communication Absence of cross talk Free from dermatic hazard Easier to handle and less maintenance Free from rodent attack  

Telephone cable telephone cables are processed by high-speed state-of-the-art machinery. The conductor is made of pure electrolytic grade, super annealed, tinned copper and is insulated with good quality pvc. The cores are carefully twisted together with suitable lays and bunched together such that the cross talk is reduced. Also the cores may be helically wrapped with myler or polyester tape. A nylon ripcord is also provided in order to safely peel off the jacket without damage to the cores. The laid up and bunched cores are finally jacketed with pvc for indoor application. drop wire the conductor in self supporting drop wire is 0.5 mm made out of ec grade solid copper wire. This is pvc insulated and with fibre glass roving as strength member. The cable is used for landline connected from the pole to the subscriber end. "prestige" self supporting drop wire is made as per tec specification no. G/wir-03/02 july'99. jumper wire the jumper wire is made out of ec grade solid copper wire with 0.5 mm conductor dia. This is pvc insulated and two cores are twisted together. The cable is made as per tec specification no. G/wir-10/02 dec.'94. telecommunication cables are highly required for multistoried building and commercial establishments by plants. There cables are manufactured confirming to itd specification. S/ws–118d, s/ws–113 b, bs 3573. construction parameter cable type 2 pair, 3 pair, 4 pair, 5 pair, 10 pair. Conductor diameter solid annealed bare copper, 24awg (approx. 0.5 mm) insulation material high density polyethylene insulation thickness avg. 0.2 mm rip cord nylon pvc jacket flame retardant pvc with low halogen content. Approx. Overall diameter 3.50 4.20 mm 5.30 mm 6.00 mm 8.50mm mm electrical parameter conductor diameter 92.20 ohm / km at 20oc max. Mutual capacitance 50 nf / km max. Insulation resistance in air 10000m-ohm km capacitance unbalance– pair to pair 250 pf / 100m max. Capacitance unbalance – pair to ground 330pf / 100mmax. Resistance unbalance 5% max. no. & dia of wire no. Of pair min. Thickness of sheath unarmoured cable max. Od approx. Net weight. Mm mm mm kg / km 2/0.50 1 0.50 3.50 12.20 4/0.50 2 0.65 5.10 25.10 6/0.50 3 0.65 5.60 32.50 8/0.50 4 0.65 6.00 39.50 10/0.50 5 0.65 6.30 47.50 12/0.50 6 0.65 6.80 53.75 14/0.50 7 0.65 7.00 59.00 20/0.50 10 0.75 9.00 88.00 22/0.50 11 0.75 9.50 93.50 28/0.50 14 0.75 10.50 108.75 40/0.50 20 0.75 11.50 147.50

We are specialized in manufacturing Telephone Pair Cables that are made in accordance to industry standards. These are generally used in telephone switching exchanges, switch board and telephone wiring. Available in both standard and customized specifications, these cables are also checked on various parameters to ensure a long service life. Our copper telephone cables are designed & manufactured to perfection in order to meet the needs for safe and reliable transmission of voice, video and data. We are a highly motivated professional team, with sophisticated infrastructural facilities and sales network to meet the customer's needs.  

The Telephone Armored Cables are made from solid plant copper conductor, color coded polyethylene bedding, galvanized steel wire armour and black or grey polyethylene or external grade PVC sheath. Our wires are made under the supervision of qualified professionals and go through stringent quality checks. These are widely used for external connection of telephone systems and other communications equipments where the added protection of steel wire armoring is needed. It is also installed for primary and secondary underground (direct buried) distribution networks. Description:- Telecommunication ARMOURED Cable, Annealed Tinned Electrolytic Copper Conductor PVC Insulated and PVC Sheathed, Twisted Pairs with Standard together in Concentric Layers to minimize Cross Talk and wrapped with Melinex/PVC tape, ARMOURED with G.I. Wire/Strip as Taped, PVC Sheathed with a Nylon Rip Cord confirming to 'TEC specification No. G/W1R/-06/02 MAY94