Identification Systems Dealers (153 products available)

Benefits: * Color TFT Screen with GUI interface for each. * Reads fingerprint and or PINS. * Built-in serial and Ethernet ports. * Multilanguage support.

• Power Supply:  120 VAC / 220 VAC versions available (must specify)..

Automated Microbiology Detection System No sample preparation or visual interpretation of results required, Initiate a test anytime, with automatic reporting of results that are sent directly via email notification to any device immediately upon detection, Simple operation that does not require specialized personnel, High dynamic range eliminates need for multiple dilutions.

• Users: 30,000 Cards
• Transaction: 1,00,000 Logs
• CPU: 32 bit High End Microprocessor – 800 MHz
• Identification speed:: <= 1 sec

Standalone ID Time & Attendance Terminal with Access Control Users:  30,000 Cards Transaction:   1,00,000  Logs   CPU:  32 bit High End Microprocessor  – 800 MHz   Identification  speed: 

• Power Supply: 12V DC, 1.5A
• Transaction Capacity: 1,00,000 Logs
• ID Card Capacity: 10000

• Battery: 7x NiMH AA batteries
• Dimensions: 210 x 130 x 55 mm (8.27 x 5.12 x 2.17 inches)
• Weight: 750 g (2.01 lbs)
• Autonomy: 8 hours
• Charge Time: 5 Hours
• Operating Temperatures: -10°C to 45°C (14°F to 113°F)
• Storage Temperatures: -20°C to 45°C (-4°F to 113°F)

The VCI-3 is a vocal cable identification and phasing system used during installation or maintenance works on deenergized three phase systems.   Features Unique balanced injection system that eliminates signal bleeding on other wires Three different frequencies to identify each phase Easy to install and operate Extended range: up to 10 km (6 miles) of working distance Tone transmission for more than 8 hours Lightweight and compact Optional magnetic sensing transducer Phase detection by transmitter tone presence or absence Digital filtering of network harmonics Unique dual grounded method

We are offering radio frequency identification system.

NAC 2500 plus designed and produced using outstanding fingerprint recognition technology, NAC2500 plus fingerprint recognition Access control & Time Attendance  system is capable of speedy and accurate authentication of fingerprint data. With this product have we made it possible for you to build a more improved and efficient security system for a lower installation cost. In addition, this product offers you enterprise level entry management and employees' work hour management with its LAN communication-based network structure and enhanced server management program, Our online Time Attendance & Access Control Systems bring you powerful security features and simple, centralized administration tools, while maximizing your investment. Auto-on function Supports TCP/IP & RS485 Remote management and real-time monitoring capability by providing a server program Capable of high speed 1:N authentication Supports multi-security modes( assorted combination of fingerprint, password and RF card) Encrypts fingerprint data and network communications Allows, each user to access the premises only during their permitted hours

• Country of Origin: India
• Operating Temperature: 10-25 Deg.C
• Frequency: 50Hz, 60Hz
• Power: 0-6VDC, 12-18VDC
• Driven Type: Electric
• Warranty: 1yr

• Fingerprint capacity: 2000
• Transaction Storage: 100,000
• Push Data: Yes
• Power Supply: 12V 3A
• Operating Temperature: 0˚C- 45˚C
• Dimension: 193.6 x 165.2 x 86mm (Lx W x T)
• Face capacity: 3000 (1
• ID Card capacity: 10,000
• Communication: TCP/IP, RS232/485, USB Host
• Display: 4.3-Inch Touch Screen
• Standard Functions: Automatic Status Switch, Self-Service Query, Work Code, SMS, DST, T9 Input, 9 Digit User ID, Scheduled Bell, Photo ID Access Control Interfaces for
• Button, Alarm:  
• Wiegand Signal: Output
• Optional Functions: MiFare Card, Wi-Fi, 3G, 2000 mAh Backup Battery.
• Operating Humidity: 20%-80%
• Package Weight: 1.6 kg

The VCI-3™ is a cable identification and phasing system used during installation or maintenance works on de-energized three phase systems. FEATURES Unique balanced injection system that eliminates signal bleeding on other wires Three different frequencies to identify each phase Easy to install and operate Extended range: up to 10 km (6 miles) of working distance Tone transmission for more than 8 hours Lightweight and compact Optional magnetic sensing transducer Phase detection by transmitter tone presence or absence Digital filtering of network harmonics Unique dual grounded method  

• Name: RAILWAY TICKETING AGENT
• Product: IRCTC
• Usage: 1 YEAR

RAILWAY TICKET AGENT ID PROVIDING AND MANAGED BY PAYPOINT INDIA . IN THIS PACK YOU WILL GET AEPS, RECHARGE, BILL PAYMENTS AND MORE SERVICES OF RETAILERS FREE.

Our entity is counted amongst the leading Manufacturers and Suppliers of Caller ID System. It is manufactured under the observance of our expert professionals, who check all the systems on the basis of various quality parameters. Our Caller ID System is available at a pocket-friendly price. It is equipped with the following features - Caller ID on all Extension Caller ID on Transferred Extension Out Going Number on Transferred Ext. Real Time Clock Buffer Full Indication Operator Call (9) Optional Features : Voice-Guided DID, Computer Connectivity, Abbreviated Dialling, Automatic Call Back, Barge In With / Without Tone, Call Camp On, Call Parking, Call Pickup, Call Restriction, Call Transfer, Conference 3 Party, Do Not Disturb, Day Mode / Night Mode with, Serial & Parallel Ringing (Automatic / Manual), Tone / Pulse Dialling, Extension Privacy, Hunting Group, Selective Trunk Line Access, Simultaneous Ringing

• Retail Vending: Customer Loyalty

Mootek TechnologiesWe are leading in manufacturing and supplier of Touch Screen Kiosks in Chennai,Tamilnadu,India.Avail from us a wide range of Touch Screen Kiosks. KIOSK supports a full Retail kiosk solution portfolio, with proven platforms in: Lockers for Delivery / Phone Charging In-Store Money Services / Bill Payment Retail Vending Customer Loyalty Endless Aisle / Ordering KIOSK’s range of retail solutions reduce operating / transaction costs, increase sales and loyalty, while enhancing today’s consumer experience.  

Cable Identification System can be effectively used to identify any power cable low, medium, high or extra high voltage single or multi core cable of any grade, size and insulation in any power distribution networks companies. Key Features Identification of wanted cable from the bunch of cables in power network. Suitable for single and multi core armored or unarmored power cables. Impulse Voltage 36 V Impulse current up to 60 Amp. Special tongs CT 120 & CT 150 Power Supply 230V AC + 10%, 50 Hz, Single phase or from built in-Accumulator with internal charging supply Protection Class – IP 67

• Colour: White

Animal identification system meditech technologies india pvt. Ltd is the largest manufacturer and exporter of animal identification system. For identification of experimental animals. Ear punch: ear punching is commonly used for identification of small laboratory rodents and involves punching a hole in the middle of the ear. Mouse ear punch: punch of 2mm diameter and 5cm long, suitable for mouse with simple thumb type punching. Nail clipper style ear punch: punch of 2mm diameter with punching through nail clipper type mechanism. Ear tagging involves using a special applicator to place a metal tag with an identification number in the pinna of a mouse's ear. Because tags are relatively large and mouse ears develop quickly, ear tagging is suitable only for weanling and older mice.

The Biolog Microbial ID System can rapidly identify over 2,500 species of aerobic and anaerobic bacteria, yeasts and fungi. These easy to use systems provide reference laboratory quality identifications. Biolog Systems do this without the labor-intensive requirements of conventional strips or panels. There is a Biolog System for any size laboratory, from full and semi-automatic to manually read systems.

We offer baby footprint identification system. Identification of new born baby’s is one of the main tasks of the medical team following birth. Especially in developing countries, where security in public maternity wards is not very tight, and overcrowding is common, the risks of a baby swap or kidnap are above acceptable. Reliable and fast methods for identification of new born baby’s were made available and used inside maternity and hospitals, as well as on airports or bus stations. New born baby’s fingerprints can’t be clearly captured, palm print recognition is not suitable for new born baby’s yet since it is often difficult to let a newborn open his hand. Although the dna examination is proven to be efficient in the univocal identification of individuals, but it comes at high cost and can’t be used in real time applications, demanding sophisticated laboratory procedures. Compared to other techniques, footprint recognition is very attractive for newborn personal authentication, since it is · a non invasive method · easy applicability · low cost · wide acceptance. advantages: · image acquisition is fast, so reduces time for capturing footprint image. · more reliable than other types of newborns footprints identification. · if high resolution scanner used to scan, greater resolution would yield better results. · fast and accurate identification.

This project is aimed to design a generalized identity system for student ID and bus pass instead of two different cards, using RFID technology. Radio Frequency Identification (RFID) Card Readers provide a low-cost solution to read passive RFID transponder tags up to 2 inches away. The RFID Card Readers can be used in a wide variety of hobbyist and commercial applications, including access control, automatic identification, robotics navigation, inventory tracking, payment systems, and car immobilization. The RFID card reader read the RFID tag in range and outputs unique identification code of the tag at baud rate of 9600. The data from RFID reader can be interfaced to be read by microcontroller or PC. The significant advantage of all types of RFID systems is the non contact, non-line-of-sight nature of the technology. Tags can be read through a variety of substances such as snow, fog, ice, paint, crusted grime, and other visually and environmentally challenging conditions, where barcodes or other optically read technologies would be useless. This project can provide security for the industries, companies, etc. This project is designed on 8051 micro controller, in this project we issue an RFID card to each individual , which is unique for each student, this RFID card holds the details of the student like the name , gender etc.. in an electronic memory format, using this system we can eliminate the fake bus pass, and student ID when the card is shown to the reader the information present in the card is read by the reader and displayed in to the LCD connected to the microcontroller. This project uses regulated 5V, 500mA & 12V, 500mA power supply. 7805 and 7812 three terminal voltage regulators are used for voltage regulation. Bridge type full wave rectifier is used to rectify the ac output of secondary of 230/12V step down transformer.   Micro Controller : AT89S52 Crystal : 11.0592 MHz Lcd : HD44780 Led : 5mm Red LED Rfid Reader Max232 Software Requirements Keil Proteus Uc Flash Embedded C Prog Isp  

• Range: : Up to 30 cm.
• Power: : Passive Device
• Temperature: : -25°C TO +50°C

Radio Frequency Identification System (RFID) consists of three major components i.e. RF Reader, RFID Transponder (Tag) & Antenna System. The Reader generates eletromagnetic signals and transmitted through in built Antenna which interact with Transponder (Tag), if it lies in its proximity. Tags are used depending upon the application and the range required. Tags are passive devices and get powered from electro-magnetic signal generated from RFID Reader Application Program Interface (API) and customer specific application software is prepared for the Animal Database Management. The system provides instant information related to milk yield, health condition, feeding pattern, quantity of a particular animal or an animal farm.

We are offering identity management system. We understand the importance of strengthening security without sacrificing operational efficiency. That’s why we developed the identity management system (idms)—a robust, highly flexible solution designed to be applicable in many critical settings. using biographical and biometric information, idms is ideal for airlines and airports—helping create fast-lanes for pre-registered passengers and invaluable checks on employees and crew members. idms also provides a comprehensive solution for government agencies responsible for border control, hazardous material management, and securing other high-risk facilities. for businesses, idms bolsters the security of their network resources—and serves as a secure area access manager managing user identities is a top priority for many businesses today. People need to access multiple systems and resources on the corporate network, using different types of devices. But because many of these systems don’t communicate with each other, it’s not uncommon to have multiple identities for the same person. As a result, managing these redundant identities becomes complex, wastes time, and increases security risks due to errors. effective identity and access management involves several interdependent technologies and processes such as directory services, identity life-cycle management, access management, and how applications should integrate with the infrastructure. These elements combine to maintain a unified view of identities in an organization and use them effectively. we can help you address identity-related security challenges and implement comprehensive identity and access management solution based on latest technologies.

Prime Technologies is distributor of X990 fingerprint identification system, Thumb impression machine, Face Recognation system in Mumbai, Pune, Nasik, Surat, Delhi, Chennai,Bangalore, Hyderabab, Ahmedabad, Kolkata.The attendance system is designed and integrated with the different types of payroll software, SAP and ERP.    

Fame (fatty acid methyl ester) analysis is a phenotype approach and the only commercially available microbial identification system that uses cellular fatty analysis by gas chromatography (gc-fame). Researchers have identified microbes using gas chromatography analysis of cellular fatty acids (gc-fame) for half a century. In fact, there is no other commercially-available identification system today that has been able to harness this reliable, time-tested technology. It includesfame analysis of: aerobic bacteria anaerobic bacteria yeast culture fungi this analysis can be used in the following range for identification: pharma agriculture research animal science biodefense bioremediation clinical diagnosis marine science medical microbiology plant pathology soil science and other areas where microbial identification is important

We are one of the famous company, who are manufacturer of id card systems.

Identification systems are used for object identification. They can be used to automate manufacturing processes and to control the entire logistics of merchandising management through flexible networking. This reduces throughput times and makes variant manufacturing more flexible. Pepperl+Fuchs offers a comprehensive range of electromagnetic identification systems (RFID). Object identification is also possible using barcodes and data matrix codes.

• benefits: Transparent waste disposal and billing Legally binding and direct information in the event of inquiries from citizens

With the MOBA identification systems, municipalities and commercial waste management contractors can structure waste disposal transparently, and fairly. In combination with a weighing system, it is possible to charge fees according to weight. This type of billing provides incentive to separate waste, and avoid producing waste.