Sealant Dealers in Bhilwara

• Country of Origin: India
• Brand Name: SR
• Color: Milky White
• Form: Liquid
• Curing Time: 24 Hours
• Shelf Life: 24 Months
• Service Temperature Range: 8 DegreeC to 35 DegreeC

Description: SCWR-100 is a ready-to-use water repellent with advanced technology based on silane and siloxane emulsion. It is used for porous stones as well as concrete. The technology of SCWR-100: SCWR-100 is an impregnating water repellent based on silane and siloxane emulsion. It penetrates the surface and forms a meshwork-like structure under the surface. This meshwork-like structure imparts water repellency to the surface leaving the surface breathable. The breathable surface allows permeability to water vapors beneath the surface thus decreasing chances of humidity inside the surface. Key features of SCWR-100: Water repellency  Good penetration  Breathable  Resistant to alkalis  Good adhesive for paints Environment friendly  Does not changes the color of the surface Suitable for: Low-fired clay products immediately after they have been made, e.g. roofing tiles, facing bricks, floor tiles, flower pots, etc.  Main terrace  Aerated concrete  Gypsum and Gypsum-based fiberboards  Light fillers, such as perlite, vermiculites, and aerated concrete granules Not suitable for: Painted or colored surfaces Surface preparation: Clean and dry the surface before application.  The surface should be free from grease, dirt, moss, algae, fungus, or efflorescence. Application: Read the entire label before using  Test patch a surface before application.  Dilute the product before applying in the ratio of 1:20 (1 parts SCWR-20 and 20 parts water)  Spraying the product on the surface is the preferred method of application for facing bricks and floor tiles.  Dipping the substrate in the product for 30 to 60 sec is the preferred method of application for roof tiles and flower pots.  The surface on which the product is applied should stay dry for 24hrs after application. Desired results after application of SCWR-20 : The product starts curing within few hours of application and is completely cured after 24hours of application and is ready-to-use. Cleaning of equipment: By using water with soap or detergent Storage: Best before the date mentioned on the batch.  In case of cream formation, brief stirring will restore the original form.  Care of product: Don’t keep it in direct sunlight.  Tight pack the container after use to maintain the product quality.  Don’t use the product after 24 hrs of dilution. Special note: The aforementioned data is agreed quality of the product at the time of production and checking the quality during approval. The data are controlled at regular intervals as a part of our quality assurance program Neither these data nor the properties of product specimen shall imply any legal binding of certain properties or of fitness for a specific purpose. It is user’s responsibility to check the substrate and compatibility or suitability of the product for deemed application. For further information or for any query, Please consult your local Shrinath Chemicals representative.

Sealants, Adhesives, janatics pneumatics, Lubricants