EK Engineering Old ginani, Bikaner, Rajasthan

toxic level ppm measurement, as per OSHA guidelines, environment monitoring, Ex proof certified, with Large LCD Display, alarm, vibration, battery operated, light weightModel: SG Series Handheld type, battery operated Portable VOC Detector for ppm level measurement of volatile organic compounds. Since, VOCs are toxic and carcinogenic, it is highly recommended to keep VOC level below toxic level, to protect human life and work force. As per OSHA work safety guidelines, work force operating on VOC or toxic environment should be provided with personal air quality detector. SG series portable VOC detector is light weight, battery operated handheld device. It is equipped with large LCD display for measurement readout. It also has alarm with sound and flashing light, Vibration for alert. Key Features: Electro-chemical based sensing technology Measuring range: 0-1000 ppm Large LCD Display Alarm with sound, flasher and vibration Rechargeable high performance battery Intrinsically safe design for explosion proof areas Diffusion based sample. Also available with sampling pump Light weight approx ~ 197 grams weight Long life Technical Specifications: Measuring Parameters: Volatile organic compound Sensor Technology: Electro-chemical sensor cell Measuring range: 0 ~ 1000 ppm VOC Response time (t90): < 30 sec Accuracy: < 3% FS Resolution: 1 ppm Auto zero point tracking for drift compensation Power supply: rechargeable battery operated 3.5V DC Ingress protection: IP66 Application: Confined Areas Chemical plants, refinery Petroleum warehouse, bunkers Refinery, crude oil pipelines Transport Stations Fuel stations

high accuracy, vibration resistant, corrosion – resistant, with LED display, pressure transmitter for aggressive mediaMake: Fischer Messtechnik (Germany)Model: ME01   Fischer ME01 is high accuracy, robust, high vibration resistant pressure transmitter with on-board display. It has inbuilt electronic module which transmits analog signals for measured positive or negative pressure of all type of liquids and gases, including aggressive one. Working Principle: Fischer ME01 pressure sensor consists of ceramic measuring cell. The high durability of the ceramic material allows the pressure transmitter to be employed with aggressive media. A Wheatstone’s bridge is attached to diaphragm’s opposite side to the measured media. As the measured pressure is applied, it causes the diaphragm to be strained. The resistance values of the Wheatstone bridge change according to applied pressure. These values are displayed and transmitted as electrical analog output signal. Key Features: Direct measurement, without transfer fluid High vibration resistance High accuracy High overpressure safety Minimum hysteresis Key Specifications: Measuring range: 0 ~ 1.6 bar to 0 ~ 60 bar (overpressure safety: 3.2 bar ~ 120 bar) -1.0 ~ 0.0 bar to -1.0 ~ 15 bar (overpressure safety: 2 bar ~ 32 bar) Linearity: < 1% full scale Hysteresis: < 0.5% full scale Permissible ambient temperature: 0° C ~ 60° C Permissible media temperature: 0° C ~ 100° C Nominal power supply: 24V DC Output Signal: 0~20mA / 4~20mA / 0~10V, 3-wire Ingress protection: IP65 acc. to DIN EN 60529 Temperature drift, zero: 0.4% full scale / 10K Temperature drift, range: 0.05% full scale / 10K Electrical connection: connection plug M16 x 1.5 acc. to DIN EN 175301-803 Material, medium contact: AISI 316L (1.4404), gasket: Viton Material, body: AISI 304 (1.4305)   Industrial areas: Chemical industries Machine and plant engineering Process engineering Manufacturing industries Glass and silicon industries    

Fischer ME50 is programmable pressure transmitter for liquid and gaseous media. It is equipped with: Ceramic membrane / diaphragm measuring cell for measuring range upto 400 mbar Front-flush piezoresistive element based measuring cell for measuring range above 400 mbarME50 can be configured or programmed to suit onsite conditions and media via either onboard display keypad or tool adaptor EU13. Working Principle: For ceramic diaphragm measuring cell (< 400 mbar): The measuring pressure is directly applied on the rugged ceramic diaphragm. This applied pressure cause distortion on measuring membrane. The change in capacitance due to pressure, is measured at the electrodes of the ceramic carrier and diaphragm.The electronics in the pressure transmitter housing convert the change in capacitance into standard electrical signals. For piezoresistive diaphragm measuring cell (≥ 400 mbar): The measured pressure acts on silicon diaphragm of a semi-conductor chip, causing it to distort. The specific resistance of the material changes in proportion of the level of distortion. The electronics module in the pressure transmitter convert the change in resistance into standard electrical signals.   To optimise performance in line with prevailing process conditions, it is also possible to configure the pressure transmitter on-site via PC based programming adaptor EU13. Key Features: Onboard digital display, for measuring values Free choice of process measurement direction , axial or radial configurable on-site via onboard 3-key menu (off-set, range, damping, display indication) Robust housing High accuracy High vibration resistance Low hysteresis Key Specifications: With ceramic membrane / diaphragm measuring element: Measuring range: -25 ~ +25 mbar to 0 ~ 200 mbar smallest adjustable measuring span: 10 mbar overpressure safety: 4 bar With piezoresistive element measuring sensor ceramic membrane / diaphragm measuring element: Measuring range: 0 ~ 400 mbar to 0 ~ 40 bar; -0.6 ~ 0 bar to -1 ~ 15 bar overpressure safety: 4 bar to 120 bar Accuracy: ± 0.2% of full scale (including hysteresis and repeat accuracy) Permissible ambient temperature: -20° C ~ +80° C Permissible medium temperature: -10° C ~ +85° C Electrical connection: M12 plug-in connector Protection class: IP65 acc. to DIN EN 40050 Display: 3 1/2 digit LCD Materials (media contact): stainless steel 1.4404, ceramic AL2O3, Viton Seals Material (housing): stainless steel 1.4404 / 1.4571 Nominal power supply: 24 VDC Output: current / voltage 4~20mA,  2-wire Inverted curve: rising / falling Damping: 0 ~ 200 sec   Industrial areas: Nuclear power plants Thermal / gas fired power plants Chemical & manufacturing industries Semiconductor plants Glass industries  

For flue and combustion analysis in marine applicationE8500-MK offer hand-held flue and combustion analysis solution for marine application . Being handy and light weighted, it is easy to carry on-the-go, with multiple options to suit site requirement. With its multi parameter analysis feature, it can help ships achieve and confirm compliance with MARPOL Annex-VI and the NOx Technical Code and obtain IAPP certification. Features Eight (8) Gas Sensors Total: O2, CO, NO, NO2, SO2 (Electrochemical), CO2, CxHy, High CO (NDIR) “True” NOx Measurements and Low NOx Capable Consumable Spare Parts:(10) Line Filters and (5) Condensation Filters Built–in Thermoelectric Chiller with Automatic Condensate Removal 40′ / 1m Sampling Probe (2190°F/1200°C max) with 10″ / 3m hose & Sintered Filter for probe tip Draft & Differential Pressure Measurement Multi-Channel Thermometer Software for Real–Time Data Logging, Graphing and Reporting Blue Tooth Wireless Communications Automatic Long–Term Monitoring & Data Logging with Internal Memory Efficiency & Excess Air Calculations Rotating LCD Display Protective Carrying Case Light Weight, Durable, & Easy to Transport Design CO Dilution Auto–Range for Measurements up to 20,000ppm High Temperature Probes with Sintered Filter Gas Velocity Measurements with Pitot Tube High Speed Microprocessor for faster value processing Light Weight, Durable, & Easy to Transport Design Rechargeable Battery PC Software Package ApplicationsE8500-MK is suitable for marine application to Engine, flue gas, plume emissions, maintenance and datalogging of combustion parameters. Monitoring of flue gas and stack gas composition Measure and monitor Engine & combustion efficiency Pollution monitoring and control by monitoring exhaust composition

Greenheck (USA) India high performance, high efficiency yet very silent jet fans. These Jet fans are ideal for installation in occupied enclosed parking area, tunnels and other areas where linear ventilation is required.  vane axial fans. Model Greenjet or GJ is available in both unidirectional series (GJ-AU) and the reversible series (GJ-AR). Both come standard with inlet and outlet silencers, inlet guards, mounting feet and aluminum die cast propellers and blades. GJ-AU series features a true airfoil propeller which is designed to move high volumes of air at a high efficiency in a smaller diameter fan. The GJ-AR features a 100 percent reversible, highly efficient, airfoil blade design. Key Features: Aluminum airfoil propeller: Move high volumes of air with maximum thrust and maximum efficiency. Galvanized casing: Continuously welded to prevent air leakage. Motor plate: Securely welded to fan inner tube to improve rigidity and prevent vibration. Silencers: Available in two options – short (one diameter length) and long (two diameter length). Direction vanes: Available on select models to direct airflow. Smoke extraction: 300°C for 2 hours (F300 Certificate 370-CPR-1745) and 400°C for 2 hours (F400Certificate 370-CPR-1848) available on select models. Tested and certified in accordance withEN12101-3:2002 IEC rated motors: 50 Hz or 60 Hz motors available, in single or two speed, VFD rated, and EFF2 orIE2 efficiency AMCA air and sound certified Key Considerations: Standards: Apply relevant codes such as NFPA, IBC, ASHRAE, and European Standards Required air changes: Optimize air flow for normal and fire modes Sound: Reduce sound levels to acceptable limits for tenants Control strategy and sequencing: Define sensor to fan correlation and system response Accessibility and aesthetics: Advise on placement of ramps, wall openings, and pedestrian exits GreenPark components: Reduce cost and optimize safety with selection and placement Typical Ventilation Applications area include: Enclosed / Basement air and smoke ventilation Enclosed / Basement car park air and smoke ventilation Tunnel ventilation Linear air ventilation, in industries etc Ductless ventilation system

We are engaged in manufacturing and supplying of infrared sensors in India.

Type : Passive Infrared (PIR) Sensor

Material : Plastic

Color : Silver

Packaging : Box

Usage : Detecting Motion And Presence In Various Applications

Origin : India

These fans are centrifugal roof exhaust fans designed specifically for high wind applications, such as hurricanes, tornadoes and other high wind areas.The down blast design is ideal for general clean air applications where air is discharged directly onto the roof surface. These fans offer the industry’s best performance and durability for general clean air applications where air is discharged downward, toward the roof surface. Models are tested to all three Miami-Dade test protocols for static loading, missile impact, and cyclic loading. Standard Construction Drawn shroud with integral rolled bead for consistent material thickness and strength. High strength internal support structure and bracing. Motor and drive frame are isolated from the airstream, mounted on true vibration isolators and sized for 150% of maximum driven horsepower. Bearings are pillow block design selected for a minimum basic L10 life of 100,000 hours (average L50 life in excess of 500,000 hours) at maximum cataloged speed. NEMA-1 disconnect is mounted and wired from the factory. High wind load roof curb is available for flat and pitched roofs. Broadest performance in the industry, up to 3.25 in. wg (810 Pa) and 45,000 cfm (76,500 m3/hr). Most advanced motor cooling of any fan in its class. Performance as cataloged is assured. All fan sizes are tested in our AMCA Accredited Laboratory, and all models are licensed to bear the AMCA Sound and Air Performance seals. UL Listed for electrical. Models G and GB are licensed to bear the AMCA Seal for Sound and Air.  Applications: Emergency smoke control Seismic High Wind and Hurricane Demand Control Ventilation for Multistory Buildings  

Stainless steel, corrosion resistant diaphragm for non-corrosive and aggressive liquids, gases mediaMake: Fischer Messtechnik (Germany)Model: DA08 Fischer DA08 is high accuracy gauge for measuring low and lowest level differential pressure, absolute pressure and partial vacuum pressure of non-aggressive and clean gaseous media. These are mainly suitable for installation in industrial and climate control application eg. pharmaceutical, biotechnology, clean rooms, HVAC, data centres, laboratory, kitchen etc. Working Principle: A capsule element measuring system is installed into a pressure-tight housing.The higher pressure acts on the inside of the capsule element, the lower pressure is lead into the pressure-tight housing. The differential pressure arising between the internal and external side of the measuring system leads to a deformation of the capsule element. This movement is turned into a scaled measured value indication via the motionwork. Key Features: Low and very low measurement range Easy installation Maintenance free Key Specifications: Measuring range: 0~ 4 mbar to 0 ~ 160 mbar Max pressure load: For ranges ≤ 16mbar 10 x full scale For ranges > 16mbar max. 200 mbar Operating temperature: Ambient: -20°C to +70°C; Media: max. +50°C Accuracy: Class 1.6 acc. to DIN 16005 Protection class: IP54 per DIN EN 60529 Housing: Aluminium varnished black Circular dial type 100 or 160 mm diameter indicator Industrial areas: Manufacturing and chemical plants Onshore and offshore area Petrochemical, solvent industry Sewage, effluent treatment plants

Acrolein is a clear, colorless, or yellow liquid with a pungent, suffocating odor. It is very flammable and may polymerize violently. Acrolein should be stored in a cool, dry, well-ventilated area in tightly sealed containers. It should be kept separated from alkaline materials such as caustics, ammonia, organic amines, or mineral acids, strong oxidizers, and oxygen. Acrolein is soluble in water, alcohol, ether, and acetone. The smell of burnt fat (as when cooking oil is heated to its smoke point) is caused by glycerol as the burning fat breaking down to acrolein. XGST series acrolein gas sensor transmitter is highly robust, industrial grade, flameproof / explosion proof instrument for toxic level detection in ppm terms. It is fixed type instrument for online continuous monitoring in ambient or duct air. Due to its industry standard analog or digital output, it can be connected to any standard controller or SCADA system for monitoring and alarm purpose. The detector can be installed at walls, surfaces or in ducts for monitoring in gas or air sample. It is ATEX EEx’d’ certified with SIL 2 safety integrity level for hazardous area installation Zone 1 and 2. Acrolein gas sensor transmitter is based on highly reliable electro-chemical sensing technology for slightest detection. It has unique feature of auto diagnostic watch dog with zero point tracking feature. Due to its 10-bit microprocessor based control unit, it offer high accuracy over long term. The detector is also equipped with sintered filter with flashback arrestor for enhanced safety. Key Features: Electro-chemical sensor cell with specific sensitivity 10-bit microprocessor control unit Non-intrusive one-man calibration via hall effect switches ATEX certified explosion proof / flameproof, suitable for Zone 1, 2 gas explosion installation Linear, proportional analog industry standard current output Continuous system self-diagnosis with watch dog Flashback arrestor with sintered filter Auto Zero point tracking to zero point compensation RS485 serial interface with Modbus RTU communication (optional) 1 or 3 relay output module (optional) System and alarm LED indicators (optional) Modbus RTU communication over RS485 serial interface  Specifications: Measuring Parameters: acrolein gas Sensor Technology: Electro-chemical sensor cell Measuring range: 0 ~ 10 ppm Response time (t90): < 30 sec Control unit: 10 bit microprocessor based Warm up time: < 5 mins Auto zero point tracking for drift compensation Power supply: 24V DC Ingress protection: IP66 Enclosure: anti-static epoxy coated metal alloy Output: linear, proportional 4-20mA Mounting: wall, duct, pipeline ATEX marking: CE 722 Ex II 2G EEx d IIC T6 CE 722 Ex II 3G EEx nA IIC T6 Optional: LCD Display, alarm LEDs, potential free relay contacts Hazardous area: Zone 1, 2 Application: Insecticides, pesticides Manufacturing plants Chemical plants

UL555 Certified Fire Smoke Damper model FSD-311 is a high performance combination fire smoke damper with Class I leakage with 1 1/2 hrs fire resistance rating. High strength airfoil blades ensure the lowest resistance to airflow in HVAC systems with velocities to 4000 fpm (20.3 m/s) and pressures to 8 in. wg (2 kPa). FSD-311 is available with high performance, fast acting spring return electric actuator / motor with fail-safe function and auxiliary switch for position indication. Actuator can be offered with 24V AC / DC or 230V AC power supply option.   Model FSD-311 may be installed vertically (with blades running horizontal) or horizontally and is rated for airflow and leakage in either direction. Model FSD-311 meets the requirements for fire dampers, smoke dampers and combination fire smoke dampers established by: National Fire Protection Association NFPA Standards 80, 90A, 92A, 92B, 101 & 105 IBC International Building Codes New York City (MEA listing #260-91-M) CSFM California State Fire Marshal Fire Damper Listing (#3225-0981:103) Leakage (Smoke) Damper Listing (#3230-0981:104) Key Features: UL 555 Fire Resistance Rating Fire Rating: 11⁄2 hours Dynamic Closure Rating: Actual ratings are size dependent Velocity: Up to 4,000 fpm (20.3 m/s) Pressure: Up to 8 in. wg (2 kPa) UL 555S Leakage Rating Leakage Class: I Operational Rating: Actual ratings are size dependent Velocity: Up to 4,000 fpm (20.3 m/s) Pressure: Up to 8 in. wg (2 kPa) Temperature: Up to 350°F (177°C) – depending upon the actuator Frame Material : Galvanized steel Frame Material Thickness : 16 ga. (1.5mm) Blade Material: Galvanized steel Blade Material Thickness: 14 ga. (2mm) equivalent Blade Type : Airfoil Linkage : Plated steel out of airstream, concealed in jamb Axle Bearings : 304SS Axle Material: Plated steel Blade Seals: Silicone Jamb Seals : 304SS Closure Device : RRL, Optional: RRL/OCI, TOR Closure Temperature: 165°F (74°C) Typical Ventilation Applications area include: Enclosed / Basement air and smoke ventilation Smoke / Fire Curtain, Zoning Building fire separation

Intrinsically safe ATEX certified for air, water, liquid application TE41 is high end air dew point temperature transmitter for high pressure air applications for industrial and commercial applications like air compressors, dryers etc. Exproof Temperature Sensor Transmitter – TE411 With non-corrosive stainless steel sensor probe, temperature compensated measurement, TDPT is ideal products for demanding applications where operating pressure is very high. With analog output and serial interface Modbus, it can be easily integrated with any BMS or SCADA systems. Product Features:: High accuracy Long-term performance stability With temperature compensation and linear adjustment. Industrial grade sensor with non- condensing bearable pressure up to 16 bar Linear, proportional analog output: 0-1V/0-5V/1-5V/0-10V/2-10V/0-20mA/4-20mA Standard MODBUS RTU protocol, RS-485 communication interface Available in many standard connection sizes for different environment High pressure, low humidity. Dew point measuring range: -100 ~ +60 Free programmable software which can adjust dew point range and provide more physical parameter values – dew point, frost point, absolute humidity etc  Applications: Compressed air system / freezer / adsorption machine Plastic Dryer / industrial drying process Paper / Chemical Process monitoring Underground mines and bunkers Air tanks, storage systems

Working Principle: Fischer TE01 uses Pt100 thermoresistance element for measuring media temperature of the process. Due to its high stability of material stainless steel 1.4571, it can be used for nearly all aggressive media. Resistance values of measuring element Pt100 sensor changes with change in temperature. This change is converted, indicated and transmitted via internal electronic module of TE01. Electronic transmission signals are available in form of 0~20mA or 4~20mA via 3-wire connections. Key Features: Direct measuring sensor High degree of protection against vibration High accuracy Low hysteresis Linear, proportional analog output Key Specifications: Measuring range: -50 ~ 0 ° C upto 0 ~ 300° C Sensor element: Pt100 Linearity: 1% full scale Permissible ambient temperature: 0 ~ 60° C Mechanical connection: connector bung G 1/2 A Electrical connection: plug connector acc. to DIN 43 650 Protection class: IP54 in accordance with DIN 40 050 Indicator: 3 1/2 digit LED display Wetted parts, material: chrome-nickel-steel 1.4305, ceramic viton Casing: chrome-nickel-steel, 1.4301 Front glass: safety glass Power supply: 24 V DC Output signal: 0 ~ 20 mA , 3 wire   Industrial areas: Process engineering Process plants Manufacturing and chemical industry Environment engineering Marine, shipping, ship building Water, effluent treatment system  

For air, clean gases, dry vapourModel: 930.8x Beck Air differential pressure switch – 930 For Explosion proof version, click here 930.8x differential pressure switch is high performance, high quality differential pressure switch. These DP switch can be used for monitoring over-pressure, vacuum and differential pressure of air or other non-combustible, non-aggressive gases. where x is: 0 = 20-300 Pa with switch differential of 10Pa (0.2 to 3 mbar) 3 = 50-500 Pa with switch differential of 20Pa (0.5 to 5 mbar) 5 = 200 – 1000 Pa with switch differential of 100Pa (2 to 10 mbar) 930.8x comes with high repeatability changeover switch to enable pressure control and automation, thus find many applications in HVAC area. Eg. filter status monitoring, AHU pressure / flow monitoring and so on. Key Features & Applications: Most important feature of Beck 930.8x, is its adjustable switching knob, thus user can set switching contacts at any required differential pressure. This peculiar feature makes pressure switch highly versatile, and thus can be used in many control topology in HVAC and air applications. Another key feature, is high performance contacts, with high switching repeatability, thus making it very very low failure product. This make it highly reliable. One of the most widely application, is air filter or HEPA filter monitoring in air ventilation. With adjustable knob, user can adjustable level of allowable congestion / clogging in filters due to dust and hence alarm filter status or requirement of charging. DPS 930.8x is far better than its peer products in every terms whether reliability, easy to work, mounting, repeatability, performance and integration. Silent Features: Adjustable knob to set switch at any desired switching pressure Transparent enclosure for ease to monitor switch point Squeezing cable gland to dust and moisture protection Robust performance over the life Easy installation IP54 protected Maximum operating pressure: 10 kPa Operating temperature: -20 deg cel to + 80 deg cel Silicone diaphragm, tempered at 200 deg cel Switch rating: max. 1.0A / 250 VAC Certification: Low Voltage Directive 2006/95/EC; RoHS Directive 2011/65/EC Some suggested fields of application include: Monitoring air filters and ventilators Monitoring industrial cooling-air circuits Overheating protection for fan heaters Monitoring flows in ventilation ducts Controlling air and fire-protection flaps Frost protection for heat exchangers Air flow switch

TDPT is high end air dew point temperature transmitter for high pressure air applications for industrial and commercial applications like air compressors, dryers etc. Dew Point Temperature Transmitter – TDPT With non-corrosive stainless steel sensor probe, temperature compensated measurement, TDPT is ideal products for demanding applications where operating pressure is very high. With analog output and serial interface Modbus, it can be easily integrated with any BMS or SCADA systems. Product Features:: High accuracy Long-term performance stability With temperature compensation and linear adjustment. Industrial grade sensor with non- condensing bearable pressure up to 16 bar Linear, proportional analog output: 0-1V/0-5V/1-5V/0-10V/2-10V/0-20mA/4-20mA Standard MODBUS RTU protocol, RS-485 communication interface Available in many standard connection sizes for different environment High pressure, low humidity. Dew point measuring range: -100 ~ +60 Free programmable software which can adjust dew point range and provide more physical parameter values – dew point, frost point, absolute humidity etc  Applications: Compressed air system / freezer / adsorption machine Plastic Dryer / industrial drying process Paper / Chemical Process monitoring Underground mines and bunkers Air tanks, storage systems

Cyclobutane is a colourless gas and commercially available as a liquefied gas. Derivatives of cyclobutane are called cyclobutanes. Cyclobutane itself is of no commercial or biological significance, but more complex derivatives are important in biology and biotechnology. SMART S series cyclobutane gas sensor transmitter is highly robust, industrial grade, flameproof or explosion proof instrument for LEL concentration detection. The instrument can be installed for flammability level or LEL detection of cyclobutane concentration or leakage in all industrial and commercial area eg. chemical plant, solvent manufacturing unit, polymer industry, manufacturing plants, warehouse etc The detector can be installed at walls, surfaces or in ducts for monitoring in gas or air sample. It is ATEX EEx’d’ certified with SIL 2 safety integrity level for hazardous area installation Zone 1 and 2. The sensor transmitter offers linear, proportional analog output in industry standard current signals, over measuring range of 0 ~ 100% LEL (lower explosive limit). The detector works on highly sensitive catalytic bead based pellistor sensor cell, with low response time. It has unique feature of auto diagnostic watch dog with zero point tracking feature. Due to its 10-bit microprocessor based control unit, it offer high accuracy over long term. The detector is also equipped with sintered filter with flashback arrestor for enhanced safety. Key Features: Catalytic bead based Pellistor sensor cell with low flash energy 10-bit microprocessor control unit Non-intrusive one-man calibration via hall effect switches ATEX certified explosion proof / flameproof, suitable for Zone 1, 2 gas explosion installation Linear, proportional analog industry standard current output Continuous system self-diagnosis with watch dog Flashback arrestor with sintered filter Auto Zero point tracking to zero point compensation SIL 2 HW TUV certified RS485 serial interface with Modbus RTU communication (optional) 1 or 3 relay output module (optional) System and alarm LED indicators (optional) Modbus RTU communication over RS485 serial interface  

Working Principle: The pressure is applied directly to a ceramic diaphragm, causing a deformation. This mechanical deformation is converted to an electric signal by means of DMS-bridge located at the rear side.An electronic system is integrated in the set-up of the appliance, converting the DMS – signals to electric standard signals – 4~20mA / 0~10 VDC. Key Features: High accuracy Robust and compact design Overload protection High vibration resistant Minimum hysteresis Key Specifications: Measuring range: -1.0 ~ 0.0 bar to -1.0 ~ -24.0 bar (max. pressure: 3 ~ 80 bar) 0.0 ~ 1.6 bar to 0 ~ 60.0 bar (max. pressure: 5 ~ 200 bar) Linearity: < 1% full scale Hysteresis: < 0.5% full scale Permissible ambient temperature: 0° C ~ +60° C Permissible medium temperature: 0° C ~ +85° C Protection class: IP65 acc. to DIN EN 60529 Materials (media contact): chrome nickel steel 1.4305, ceramics, AL2O3, gaskets Material (housing): Chrome nickel steel 1.4305 Nominal power supply: 24 VDC / AC Output: linear, 4~2-mA / 0~10 V, 2/3-wire   Industrial areas: Nuclear power plants Thermal / gas fired power plants Chemical & manufacturing industries Semiconductor plants  

Make: E InstrumentsFor boiler, engine, furnace and other combustion analysisE4400 offer perfect solution for combustion and emission parameter analysis and efficiency measurement for any industrial and commercial application in boiler, furnace, stack, plume, Engine etc installations. Being handy and light weighted, it is easy to carry on-the-go, with multiple options to suit site requirement. Features Configurable and compatible upto 4 gas sensors True NOx Capable Carbon monoxide sensor with NOx filter Built-in local non-thermal printer, for onsite & lasting reports Draft & Differential pressure meter 2 channel thermometer Rechargeable Lion Battery for longer working hours Bigger LCD display with Zoom in/out function for better visualisation External water condensation trap PC software with USB communication cable Unbreakable metal probe & hose connections Optional: Dilution pump for CO auto-range measurement upto 50,000ppm Easy Field replaceable pre -calibrated sensor cell ApplicationsE4400 is a valuable tool designed for emissions monitoring and maintenance & tuning of combustion processes including boilers, burners, gas & diesel engines, turbines, furnaces, kilns, heaters, and laboratory analysis. Monitoring of exhaust gas composition Measure and monitor combustion efficiency of boilers, kiln, furnace, engines etc Pollution monitoring and control by monitoring exhaust composition

Greenheck’s airfoil and backward inclined centrifugal fans are designed to provide efficient and reliableoperation for commercial and industrial applications. Our products are manufactured with state of the art laser, forming, spinning and welding equipment and endure our quality control testing to ensure trouble free start-up. Greenheck centrifugal models include industry leading design features to ensure your ventilation equipment ha rifugal fan with Airfoil Available with s the latest technologies available. Greenheck Centrifugal Products • AMCA Sound Certified Ratings Seal for both inlet and outlet sound• AMCA Air Certified Ratings Seal• All-Welded design construction• Concentric mount bearings with industry’s highest cataloged bearing life• Corrosion resistant, electrotatically applied and baked powder coatings• Both belt and direct drive configurations• Three plane, six channel vibration analysis on all manufactured centrifugal models Greenheck’s centrifugal products are specified to handle a variety of commercial and industrial projects.Typical applications include:• General Supply, Return or Exhaust Systems• Filter Houses and dust collectors• Emergency Smoke Exhaust (buildings, car parks, etc.)• Built-up or Custom Air Handlers• Restaurant Grease Exhaust• Spark Resistant Fume Exhaust• Stairwell Pressurization• Corrosive Fume Exhaust• Process Heat Exhaust• Grain Drying

Greenheck (USA) India offers high Performance and high efficiency vane axial fans.RA round axial fans are direct drive, inline vane axial fans. These are designed for inline air ventilation in commercial, institutional, residential and high demanding industrial buildings.The casing design and construction is well suited to indoor or outdoor applications, hence can be easily installed in ducted or non-ducted air ventilation systems. The RA fans are designed to significantly reduce operating costs and is the most efficient inline fan manufactured by Greenheck, thus making them AMCA air certified.Additionally, the RA blade design offers inherently lower sound levels than typical axial fans, with AMCA sound certification. Key Features: High performance and high efficiency with fan efficiency upto 84% Low sound as low as 75dBA, with AMCA sound certification Each fan is AMCA air and sound certified All Fans are AMCA FEG Certified. Design Features: Aluminum air foil blades Integral straightening vanes Galvanized casing Hot Dipped casing Extended motor leads Integral punched inlet & outlet flanges various mounting options available – base mount, ceiling mount, horizontal mount, vertical mount, wall mount, roof mount, ECM motors Various motors options available: Single or two, IE3 efficient High temperature operations: 300 ° C @ 2 hours, 400 ° C @ 2 hours Typical Ventilation Applications area include: Supply and return fans for air handling equipment, Emergency smoke and heat exhaust, Stairwell pressurization, Parking garage and storage facility exhaust, Industrial process ventilation, Tunnel ventilation Pressurization – hallway, atrium, lifts, laboratory Working applications: Make-up Air Smoke Control Certifications: Dubai – Dubai Civil defense (DCD) Bahrain – General Directorate of Civil Defense Kuwait – Kuwait Fire Service Directorate (KFD) Lebanon – General Directorate of the Lebanese Civil Defense (LCD) Oman – Directorate General of Civil Defense Cyprus – Cyprus Civil Defense Iraq – Iraqi Civil Defense Corps Kazakhstan – Civil Defense and Emergency Algeria – Algeria Civil Defense Egypt – Directorate General of Civil Defense of Egypt (ICDO)

  Key Features: Overpressure protected Rugged design Maintenance free Low pressure measurable without long-term drift Key Specifications: Measuring range: 0 ~ 25 Pa to 0 ~ 1000 Pa Pressure connection: tube plug nipple (MS) for 6/4 mm tube Nominal pressure: 25 bar Maximum static operating pressure: 1 bar Repeatability: 0.1 % full scale Operating ambient & media temperature: -10 C to +70 C Protection class: IP54 per DIN EN 60529 Linearity: < 2% Full scale Electrical output: 4-20mA linear, 2 – wire Power supply: 24 V DC Material, housing: ABS Materials, media contact: silicon, aluminum, glass, brass Application areas: Filter status / condition monitoring Precision air duct measurement Clean room pressure balance monitoring Burner air feed low pressure detection Oven air feed control Application areas: Building application Auditorium, office, conference rooms HVAC and ventilation application Environment monitoring Clean room and laboratory rooms

Acetic acid gas detector for online, continuous detection of acetic acid vapour presence or LEL level in ambient air or ducts. The detector is explosion proof ATEX certified with SIL 2 safety level and suitable for installation in hazardous area Zone 1 and Zone 2. The instrument can be installed at solvent storage facility, paint booth, refinery, paint manufacturing units, cleansing facility at textile manufacturing etc. It is available with LCD Display, on-board relay contacts, flashing alarm LEDs, auto diagnostic watch dog, non-intrusive calibration, with industry standard linear analog output.

We are one of the famous company, providing many types of ammonia sensors.

Gas Alarm Marketing Private Limited is a well reckoned brightness sensor manufatcturer & supplier based in India.

We are India's leading manufacturer & supplier of ethylene sensor that are available form us at very reasonable prices.