Agaram Industries Aminjikarai, Chennai, Tamil Nadu

This system works out of Hot Wire Method (Transient Hot Wire Method). While the 710 model can also analyse Thin Film the model 700 cannot. Both models would have a 5.7 inch colour LCD display and would have a two-channel RS-232C interface and a USB 2 channel output also. There are many probes to choose from like Box type proble PD-11N, Insulated Moisture-proof probe PD-13N, High Temperature probe PD-31N etc. The probe PD-31N can work from -100 to 1000 Deg C. The Thin film in 710 would be analysed in either a Box type probe or an Insulated Moisture-Proof probe.

This system can be used to analyse Thermal Conductivity of Solids, Powders, Pastes or Thin Films This system works out of Hot Wire Method (Transient Hot Wire Method). While the 710 model can also analyse Thin Film the model 700 cannot. Both models would have a 5.7 inch colour LCD display and would have a two-channel RS-232C interface and a USB 2 channel output also. There are many probes to choose from like Box type proble PD-11N, Insulated Moisture-proof probe PD-13N, High Temperature probe PD-31N etc. The probe PD-31N can work from -100 to 1000 Deg C. The Thin film in 710 would be analysed in either a Box type probe or an Insulated Moisture-Proof probe.

Advance Microcontroller based with user friendly software in dialog mode. Alpha-Numeric splash proof keyboard allows entries like sample name, sample Number ID number for data authentication. Conical shaped low evaporation recovery lids on the tablet dispenser reduces the media loss during long dissolution run Selectable report printout complies to GLP requirements. Built-in Real Time Clock (RTC) for date, time display & authenticity of printout. Error indication to trace out the problem.. Meets specification of USP, BP, EP, IP etc. Offers a count & time mode. Automatic discharge of the sample into individual sample tray after completion of each cycle. 10° tilting of drums as per USP recommendation.li> Balance interface for online sample weight transfe Calculation mode for friability -percentage weight-loss..

Kyowa Interface Japan started manufacturing Surface Tensiometer since 1957. The DyneMaster Tensiometer series starts with model DY-300 and he most sophisticated model would be DY-700. Measurement technique used in Kyowa Tensiometer are Wilhelmy plate method ,du Noüy ring method, Pendant drop method and Maximum bubble pressure method Instrument is widely used in Paint industry, ink, Rubber , Pharma ,Ceramic, Nano & polymer and Research institutes etc The same instrument is also used for the measurement of IFT - INTERFACIAL TENSION. This is mostly used in the study of quality of Transformer Oil. When IFT is measured the system is delivered with DuNuoy ring and a bigger sample receptacle with graduation Sampling volume and speed is single hand controlled. (Patent pending) Operative either by right or left hand, the cell can be viewed during measurement. Light weight allows operators to feel tireless in the normal operations. Viscous liquid up to ca 2000 mPa･s can be sampled in.

The Cone base silos are often routinely used in applications requiring a lower capacity for reducing labour costs by enabling rapid evacuation. Silo uses Geometer JS1000 or coating with 500 bolts. Special insulation material used to seal the port. High galvanizing (SD350GD and 450g m 2 coating) provides long-term guarantee by preventing corrosion of bolts and holes.

refractoRudolph's J series Digital Refractometers are automatic, digital systems with an LCD screen. Refractive Index being highly temperature-sensitive the sample's temperature from models J57 and above is controlled by the electronic heating and cooling Peltier technology. Through the keypad the temperature of the sample can be set thus avoiding the use of water-baths which are clumsly, cumbersome and costly.

Temperature Range : 0 - 40.0 Degree C

Brand : 3NH

Brand Name : Rudolph's

Application : Laboratory

Packaging Type : Box

Operating Temperature : -10 to 80 deg C

Display : 8-inch

The cooking oil tester testo 270 measures the quality of cooking oil easily, quickly and with reliability. The new testo 270 has an ergonomic design, which prevents the direct exposure of the hand to the hot oil.The clear alarm via the colored backlit display makes it easier to evaluate the cooking oil quality: Green would means the TPM content to be acceptable. Orange: TPM value is borderline. Red: The TPM limit has exceeded the acceptable limits and the oil should not be used anymore.

The Contact Angle meter also goes by the name Goniometer DropMaster (DMs) series Contact Angle meters has a range of systems starting from DMs-200 which is the basic of the models to the most sophisticated DM-701. The model DMs-200 model is a basic model used to determine the Contact Angle under the Sessile drop method in the Static mode. From model DM-CE1 one can determine the Contact Angle under the Sessile drop method in the Static mode and also dynamic mode. And Surface Tension of liquid sample can also be determined. The robust FAMACS software ensures that the system can also give Dynamic contact Angle results. DM-701 can perform Sessile Drop Method, ExtensionContraction method, Surface Interfacial tension of liquids with Pendant drop method, Sliding Method & Dynamic Sliding Method. This is the most automatic model and even stage movement and Droplet deposition are controlled through the PC. The optional accessories are numerous to choose from including Computer controlled Dispenser, sliding method, Temp control of Stage, Temp. control of dispenser, High Speed Camera etc.. With the Surface Free Energy software, one can analyse the Solid surface free energies and their components from the results of Contact Angle with different liquids.

Kyowa Interface Japan has been manufacturing Contact Angle meters since 1960. These instruments are used in the Contact Angle measurement, Surface Free Energy analysis and SurfaceInterfacial Tension measurement. The Contact Angle meter also goes by the name Goniometer DropMaster (DMs) series Contact Angle meters has a range of systems starting from DMs-200 which is the basic of the models to the most sophisticated DM-701. The model DMs-200 model is a basic model used to determine the Contact Angle under the Sessile drop method in the Static mode. From model DM-CE1 one can determine the Contact Angle under the Sessile drop method in the Static mode and also dynamic mode. And Surface Tension of liquid sample can also be determined. The robust FAMACS software ensures that the system can also give Dynamic contact Angle results. DM-701 can perform Sessile Drop Method, ExtensionContraction method, Surface Interfacial tension of liquids with Pendant drop method, Sliding Method & Dynamic Sliding Method. This is the most automatic model and even stage movement and Droplet deposition are controlled through the PC. The optional accessories are numerous to choose from including Computer controlled Dispenser, sliding method, Temp control of Stage, Temp. control of dispenser, High Speed Camera etc..

Number Of Flower : Digital

Measuring Range : 0-600mm