Emhart Teknologies India Private Limited Bangalore Highway, Chennai, Tamil Nadu

Weldfast welding equipment welds metal brackets directly onto the surface with maximum energy efficiency. A facility comprises DCE MAX power source Welding tools: weld head or weld gun Feeder systems: stacking magazine or bulk goods feeder Weldfast welding equipment

Since a spot-welded flange is not used, the brackets offer savings of up to 75% in material with the same stability and functionality. One bracket replaces up to four different parts. Fully automated feed for mass production.

Metal pressings of any shape can be welded on directly. As simple, compact and automated like stud welding. More about Weldfast

Plastifast offers plastic parts combined with assembly equipment for mass production. The plastic fasteners are supplied as taped and reeled products and prove their worth in final assembly or pre-assembly for trim, soft trim, seals and all applications where many equal fasteners are to be set.

Tucker washer studs have an expanded surface for fastening components with large cut-outs. The pre-assembled washer allow no-hole fastening of mud guards, windscreen wipers, glove compartments, cockpit, lighting, etc.

Vgrip™ Multi-Grip POP® Rivet sets with a neat, symmetrical single roll, single bulge blind side in all grip thicknesses. This gives a superior finish compared to other Multi-Grip rivets. Ideal for applications with varying grip thicknesses where a tidy setting is important. More about Vgrip™

Aluminium is being increasingly used in automotive production since the 1990s. From the very start, STANLEY Engineered Fastening collaborated closely with the automotive industry and developed extensive know-how. In the first mass-produced vehicles with an aluminium-only body, STANLEY Engineered Fastening was the 100% supplier for weld studs and welding systems. Today, Tucker aluminium weld studs can be found wherever aluminium parts are used.

The material mix in modern lightweight vehicles is seeing highly rigid steel or noise suppression plates being used increasingly. Welding studs with spot shaped flanges causes problems of stability; in noise suppression plates the danger arises that a layer can be melted through and the plastic coating damaged. Instead of using expensive insert nuts, rivets or screw solutions, the Tucker ring flange stud is the optimum solution. Its large contact surface guarantees transferability of torque and other resistances which was previously not possible.

Welding metal studs to sheets - easy, efficient and automated. Tucker stud welding opens up completely new dimensions in fastenings. required access from one side using arc welding techniques only fully automated application A Tucker stud welding facility is composed of various components.

Pipe fastening Modules and subassemblies Panels and covers Trim and seals Electrics wiring systems

The special geometry of Tucker Nuts and a large outer diameter create a highly secure positive bond to the base plate. The Tucker Nut is cold-forged, resulting in its very high internal strength. M5 to M10. Fully automated feed Rounded head to prevent possible damage to cables routed immediately adjacent Can be used as threaded inserts without drilling the base plate For fastening all mounted parts High flexural rigidity

Ground contact with painted cover; this method has been tried and tested millions of times; corrosion is minimised. Grounding via a reliable ground connection is decisive for the smooth operation of the electric consumer loads. Fixed, secure contact and load capacity over a number of years even at temporarily extremely high Ampere values and corresponding heat generation Tucker ground studs are installed easily, automatically and efficiently as units ready to mount using arc welding . More safety at less cost! All Tucker grounding studs in the e-catalogue

Tucker equipment for joining systems combine two technologies in one modular system: Self-piercing riveting with a semi-hollow rivet or punch rive. These techniques are used to join materials which cannot be welded easily: These include Aluminium - aluminium Aluminium - steel High tensile steel Tucker equipment for joining systems

Coarse thread for plastic parts, metric thread for metal nuts, with or without paint clearing thread - here you can find the threaded stud you need.

Self-Clinching Fasteners are designed to become integral to the sheet metal that they are pressed into. They offer process time saving benefits and eliminate the problems associated with loose hardware.

T studs stepped studs are particularly suited for limited installation space, trim, wheel arch moulds, cable loom fastening, etc.

Cable channels fasten cables of varying cross-sections and different basic materials accurately, saving space and protecting them in a defined position. Assembly to a weld stud guarantees a permanent and corrosion-free connection.

Self-Clinching Fasteners are designed to become integral to the sheet metal that they are pressed into. They offer process time saving benefits and eliminate the problems associated with loose hardware. Our wide range of high quality fasteners includes self-clinching nuts, studs and standoffs in aluminium, steel and stainless steel.

Portable and Lightweight Setting capacity 4.8 5.0mm Dia. Professional standard, robust cast aluminium and steel design. Contoured handle grips for comfort. Rivet-retaining handle, designed for one-handed riveting. Supplied with nosepieces for 2.4mm, 3.2mm, 4.0mm & 4.8mm Dia. rivets. Supplied with nosepiece wrench.

High Capacity Power Tool Setting Capacity 6.4mm Dia. Capable of setting the full range of POP® Rivets. Lightweight, strong polymer construction. Comfortable two finger, low activation force trigger. Directionable air exhaust (MCS model). High force-to-weight ratio. Quick disconnect nosehousing, front end assembly and Mandrel Collection System. OnOff, left or right swivel air fitting. Spring return for a reliable fast setting cycle. Compatible with POP® Rivet Presenter (RP). Compatible with POP® Remote mandrel collection system (MCS5000). Air-isolation during MCS removal.

Ideal for the demands of the production lines of the Sheet Metal Industry, ProSet®2500 Pneumatic Rivet Power Tool is lightweight and reliable with a high force to weight ratio and many other designed in features that ease operator fatigue and speed up tool maintenance. The tool has a setting capacity up to 4.8mm diameter POP® rivets. More about ProSet®2500

The POPNut® Threaded Insert range includes a wide variety of Insert configurations to suit the needs of your application. POPNut® Types POPNut® Materials POPNut® Geometry POPNut® Applications

TUCKER stud welding tools with linear motor technology are characterised by their positioning accuracy. Their high operational reliability and compact design have proved an excellent advantage for the production of large and small series. The lateral stud feed which runs parallel to the head facilitates movability of the weld head; the space required is reduced to a minimum. The linear motor drive records the strokes via a positioning transducer. This controls exact adherence to the defined lift height and the depth of penetration into the weld pool. A cushioned dipping process with variable speed can be adjusted according to material usage and properties.

The POPNut® Setting Tools range includes the most up-to-date features to provide you with excellent setting performance. Reliable and easy to use, our tools offer optimum performance, whatever your application. POPNut® Hand Tools POPNut® Power Tools POPNut® Systems

Software packages: networking software, software for maintenance engineers, data management, etc. Software solutions for Tucker welding facilities