Fume Cupboard Dealers in Chennai

Material of Construction:6mm thick asbestos lined FRP Bispheonl "A" fumerate resin rein forced with veneer ply sheet 12 mm thick. External laminated with melamine sheet.Door:Single, automatic, concealed type balanced with counter weights, sash weights, wire rope and others.Motor: 1 H.P. 1440 RPM, three phase motorDucting:200MM dia thick, rigid PVC pipe of height 8' will be provided with suitable rain hood.Impeller: Dynamically balanced FRP impeller. Buffed by 3 mm thick FRP sheet.Exhaust blower: Centrifugal dulvin type, in-builtCasting: 6 mm thick FRP Bisphenol "A" fumerate resin.Temperature: Max 120'C pressure 2" swgSuction: 1000/1200 cfm per minute.Balancing: By suitable equipment upto 3000 RPMBottom Arrangement:3' Height table made out of 19mm black board with sliding door, open door and one number horizontal partition internally coated with epoxy paint.Flooring: Working surface shall be floored with spartek tiles with acid resistant cement joints.Electrical Arrangement:2 Nos of 3 pin 15/5 amp socket, with control switch and bush type starter will be provided.Overall Dimension Approx.: 8 X 5 X 2.5 FeetPower Supply: 230 Volts 50 Hz Ac Main 3 Wire System.

We offers a wide range of Fume Exhaust Hood to suit every specific application of the user. These are designed to exhaust toxic, or otherwise harmful vapours etc, for protecting laboratory personnel and equipments. Fume exhaust hoods provided by us are made of water proof ply & block boards. Its external body is fabricated from laminated sheets and interiors coated with epoxy paint. Features: Precision functioning Sturdy construction Low maintenance

We offers a wide range of Fume Exhaust Hood to suit every specific application of the user. These are designed to exhaust toxic, or otherwise harmful vapours etc, for protecting laboratory personnel and equipments. Fume exhaust hoods provided by us are made of water proof ply & block boards. Its external body is fabricated from laminated sheets and interiors coated with epoxy paint.

ll local ventilation systems (devices) are designed to three primary goals To protect the user from inhaling toxic fumes (fume hoods, glove boxes, biosafety cabinets) To protect the product or testing (experiment) (glove boxes and biological safety cabinets) To protect the atmosphere (recirculating fume hoods, biological safety cabinets, the exhaust airstream)

Fume Cupboard, Microwave Digestion System, Three Block Digital Heater

Fume Cupboard, Industrial Ventilation, Air Curtain, Dust Collecto

Fume Cupboard, Clean Room Pass Box, Laminar Flow Cabinet, Chemical Fume Hoo

Laboratory Fume Cupboard, Laboratory Fume Extractor, Laboratory Island Tabl

Fume Cupboard, Sensor & Temperature Controller