rice murukku
200 - 240 Per Kilogram
100 Kilogram (MOQ)
Murukku Snacks
20 Per Kilogram
1 Ton (MOQ)
Best Deals from Murukku
Thenkuzhal Murukku
300 Per Kilogram
500 Kilogram (MOQ)
Mullu Murukku
130 - 520 Per Kilogram
250 gms (MOQ)
Permanent Magnetic Chuck
8,500 Per Piece
10 Piece (MOQ)
quick change chucks
Get Price Quote
CNC Lathes are used particularly to machine small and medium sized batches. This involves frequent changeover of the chuck jaws which can be accomplished without undue cost by using chucks with quick change jaws. Power Operated Quick Change Jaw Chuck provides a super high speed range.GMT is one of the leading power chuck manufacturer in India and has designed a power chuck with a quick change jaw system. This chuck helps in reducing the jaw changing time to a minimum. The wedge bars are designed to help counteract the effects of centrifugal force, and in fact this is done by setting them into the angled pockets in the body of the chuck. Moreover, the angles chosen by GMT for the piston shoulders and wedge bar teeth provide high mechanical efficiency ratio that provides for both sensitive and high pressure clamping. To withstand the most arduous working conditions, all PHQC chucks are designed with a high factor of safety. PHQC Chucks are operated by means of rotary cylinders controlled by proximity switches that provide signals concerning the state of the chuck i.e. clamping or de-clamping.
Magnetic Chuck
Get Price Quote
1 Piece (MOQ)
Murukku
Get Price Quote
Foxtail Millet Murukku
350 Per 200 Gram
50 Kilogram (MOQ)
Electromagnetic Chuck
Get Price Quote
1 Piece (MOQ)
Electromagnetic Chuck
20,000 Per Piece
1 Piece (MOQ)
Dog Chuck
Get Price Quote
We are a reseller of Dog Chuck. We can provide best quality dog chuck in chipseWe are a reseller of Dog Chuck. We can provide best quality dog chuck in chipset prise.t prise.
Power Chuck
27,000 Per Piece
1 Piece (MOQ)
Power Chuck
85,000 Per Piece
10 Piece (MOQ)
Power Operated Chucks
35,000 Per Piece
MS Collet Chuck
15,000 Per Piece
Stainless Steel Lathe Chuck
6,000 Per Piece
Diaphragm Chuck
50,000 Per Piece
1 Piece (MOQ)
safety chuck
Get Price Quote
Queen Fab Industrie line of rugged safety chucks provide roll shaft support and torque transmission at a low cost. The maintenance-free design ensures optimal performance throughout the life of each safety chuck.
keyless drill chuck
2,200 Per Units
Heavy Earth Movers Drill Chuck
Get Price Quote
Bonded Disc Pack Flange Chucks LAFF
Get Price Quote
For clamping diameters from 7 mm to 80 mm High true running accuracy ≤ 0,01 mm Permissible component tolerance up to IT11 Short or long clamping length possible Pull-back against shoulder ring For thin-walled or solid components Impervious to ingress of foreign objects due to the rubberized slots in the Bonded Disc Pack
Collet Chuck
6,500 Per Piece
Collet Chuck
2,800 Per Piece
1 Piece (MOQ)
Bevel Gear Chuck
Get Price Quote
Magnetic Chucks
Get Price Quote
âEFIâ permanent magnetic chuck is widely used in the machine tool industry. It is Easy to install and to operate and it has the highest holding power .It is suitable for many milling applications and for general tool room grinding. FeaturesPowerful holding on entire chuck surface Solid construction top plate protects permanent magnetic pack from EDM fluidsFine pole divisions - for more uniform magnetic holding of small parts EDM operation does not affect by Magnetic.
Magnetic Chuck
2,500 Per Piece
Precision Collet Chuck
2,800 Per Piece
electro permanent magnetic chucks
Get Price Quote
Productivity #Accuracy #Reliability: Reinforced Electro permanent systems with extremely High magnetic power. Absolute safety against Power or Cable Fault. Cold operating ensures Ultra Precision machining. An enormous Reduction in clamping and setup times. Customized solutions to suit your requirement. #Simpler #Safer #Super Electro Permanent Magnetic [EPM] Chuck Combines the clamping force of high quality Permanent Magnets with the advantage of switching facilities an Electrical Devices is thereby providing in piratical applications all the prerequisites for precision, safety and ease of operation. A totally original and unique Electro Permanent system is controlled electronically and the clamping zone comprises of a series pf alternate poles. An electric impulse of very high magnitude but of a very short as the chuck is switched ON with the job completing the magnetic circuit the magnets work at BH. Rem & hence is able to provide a magnetic energy perfectly suitable for heavy cuts and thrusts during Grinding, Planning and Milling operations. With these properties we can provide you performance results which has so far been unobtainable from conventional permanent magnetic chucks and hardly obtained in best electromagnetic chucks available. Dimensional Stability The solid construction of the EPM chuck eliminates mechanical distortion and unlike electromagnetic chucks there is in heat generation hence the chuck when once attached to the machine bed will be as geometrically stable as the machine itself providing working surface with uniform holding power required of precision machining. The chuck is entirely static and hence it is not subject to mechanical wear. Total Security The Electronic Control unit is specially designed for Easy and Safe operation of Electro Permanent Magnetic Chucks. Power circuit is controlled by Thrusters and is operated by Remote Control. The switching On/Off of the chuck is done by means of Illuminated push-buttons. The Power consumption is considerably reduced saving almost 98% of precious energy, as only a current pulse for few seconds is required to switch the chuck on and off. Hence the running and maintains cost of the EPM chucks are virtually nonexistent. When in operation the chuck is entirely isolated & independent of power supply. This gives total security against POWER FAILURE and eliminates any risk of accidental release of work piece. Wide Range EPM chucks are available in Grinder series and Milling series in sizes from 200 mm to 1500mm in length and 150 to 400mm in width having longitudinal or transverse poles. Large Magnetic area can be arranged by multiple mounting of chucks which can be operated by a single controller. Special designed to suit yiour particular applications. They are supplied in full working order complete with side plates and power supply cable. FEATURES No electricity required to keep the chuck ON. All Metal Top Plate of Brass and Steel lamination provides full active area. Variable power makes it possible to adjust the magnetic force. It drastically reduces the loading, unloading the work pieces. Hold all type and sizes of work pieces. No heat built up, no deformation provides high precession accuracy. APPLICATION For grinding application of all sizes of jobs. These chucks are suitable for horizontal spindle surface grinding machines as the main cutting thrust is towards the length of the chuck, poles at right angle of the wheel give more gripping of the job. GENERAL APPLICATION These chucks are also available in long pole design. Large area can be arranged by multiple mounting of chucks side by side which can be operated by a single controller. Special purpose chucks can also be designed to suit particular applications. Pole pitch of 2mm (1.5+0.5) can be made at extra cost.
Power Operated Collet Chuck
Get Price Quote