N2S Technologies Pvt Ltd Omr, Chennai, Tamil Nadu

The sprue picker, a simple pick-and-place robotic device was intended as a low cost method of sprue removal or part and runner separation in the injection molding process. In most cases the low cost of these sprue pickers is maintained by employing a pneumatic motion system as the basis for their design. However, this design configuration provides a low cost robot at the expense of system durability, accuracy, speed and functionality. These desirable and needed features, inherent to the servo driven motion systems, seem unattainable in the present environment of cost conscious sprue picker applications

Our product range includes a wide range of Hydraulic Oil Pressure Sensor Range 0 - 250 Bar.

To crush defective plastic into granular form we provide Plastic crusher machines. By these machines plastic can be recycled and remoulded for use in manufacturing other products. These machines help to reduce the volume of plastic waste, make it usable for reproduction of plastic products. Almost every industry makes use of plastic crushers to save cost and resources.

Automatic Grade : Automatic

Mould clamps are an important part of any moulding operation. Insufficiently secured moulds are susceptible to being damaged and this could cost a lot to repair.

The Automatic mold temperature controller works on heat exchanging principle using water or oil to precisely control the mold temperature, this reduces the production time and thus produces quality product. One of our main objectives is to offer high quality products and to achieve this goal all our products undergo vigorous tests.Two types of Mold Temperature available Water & Oil Mold Temperature Controller

Lubricating oil pumps are used to supply oil to lubrication points, e.g. for plain bearings.   In the case of circulation lubrication, the lubricating oil pump takes in an amount of oil from a reservoir, forces it through the lubrication points and then feeds it back to the reservoir. Gear pumps, which are able to generate high static pressure in the lubricating oil system, are preferably used for this purpose.

Loaders are the simplest version of a ‘resin conveying system’ but they are not an integral part of a central conveying system. Self-contained vacuum loaders are used to transfer pellets, regrind and powders from a single source (usually a Gaylord) to a single destination (usually a blender, drying hopper or machine throat). A pickup lance is inserted into the material source container and a length of flexible hose connects the lance to the loader.

Prominent & Leading Manufacturer from Chennai, we offer Linear Scale Rod & Slide type Injection Molding Machine, Linear Scale Slide Injection Molding Machine, Linear Scale Slide, Linear Sale Rod Type Injection Molding Machine, Linear Scale Rod and Micro Rod Linear Potentiometer 50 mm.

Prominent & Leading Manufacturer from Chennai, we offer AC Servo Axial-Traverse Robot Beam, 2 Axis AC Servo Traversing Robot Beam, CNC AC Servo Large Robot Beam, Economic AC Servo Traversing Robot Beam, High Speed AC Servo Traversing Robot Beam and 5 Axis AC Servo Traversing Robot Beam.

Prominent & Leading Manufacturer from Chennai, we offer Injection Machine Electricity Meter.

High Speed Injection Position Control Position data acquisition adopt continuous capture mode Only need 25us to finish from data acquisition to injection control . Mold Open / Close Control Adaptive mold positioning control algorithm can seamless docking the various situation of different machine and different mold Any speed,any open and position ,make the overshoot distance

Number Of Flower : Injection Molding Machine Controller

Total Carbohydrate : 1year

Home » Our Product Range » Hot Runner Temperature Controller   HOT RUNNER TEMPERATURE CONTROLLER Maintain the optimum molding conditions by automatically controlling the temperature of the nozzle and the manifold-block. In addition the PID control by the micro-computer has increase the precision of control and also a self-diagnosis function. · Adjusting the value and setting time, the operation is simple · Manual on / off function · Solenoid value output voltage AC220/DC24V · Support A or B operation mode · Real time display running status · Shutdown state, the data storage function to start · Precise time control (minimum 0.01 seconds, maximum 999 seconds) · Software control on / off function

Loaders are the simplest version of a ‘resin conveying system’ but they are not an integral part of a central conveying system. Self-contained vacuum loaders are used to transfer pellets, regrind and powders from a single source (usually a Gaylord) to a single destination (usually a blender, drying hopper or machine throat). A pickup lance is inserted into the material source container and a length of flexible hose connects the lance to the loader.

features:1)usually used for cooling.2)pure titanium tube has super strong corrosion proof ability and high intensity.3) the seamless titanium tube was tested by 2.0mpa pressure precise halogen leak detection to make sure the tube is strong and not leakage .4)the cooler shell was tested by 0.5mpa water pressure to make sure the water system not leakage .application:shell and tube heat exchanger are widely used for cooling and heating in certain fields of special industries, such as acid tank plating, aluminum oxidation, petrochemical industry, light industry, metallurgy, electric power, shipbuilding and marine environment etc.with the advanced production equipments and informationalized management, we produce water-cooled heat exchangers strictly based on industrial standards and technique. The shell and tube heat exchangers are designed to remove thermal energy from the exhaust gas of natural gas, compressed air, hydraulic oil and transfer it to the water circuit. The extracted heat can be used for space heating, domestic hot water and any industrial process that requires hot water.the water cooler is widely used for plastic injection molding machine, air compressor, die casting machine, hydraulic system and other industries such as coal industry, chemical industry, textile industry and so on.selections:1. Tube material selection: stainless steel, copper 0.55 thickness and copper 0.8 thickness.2. Type of oil/gas flowing way: screw-guide plate, the immovable tube-plate.3. Type of tube surface: copper tube rolling fin outside, copper tube without rolling fin, stainless steel tube without rolling fin.     request callback  

The claming units main function is to open and close the mold along with ejecting the parts. The two most common types of mold clamps are the are the direct hydraulic and the toggle clamps. Toggle clamps are actuated by hydraulic cylinders. These clamps utilize mechanical linkages to generate higher forces than a direct connection from a hydraulic cylinder of the same size

Servo System: High Energy Saving Rate, High Stability, High Durability As we know, nowadays power saving concept using servo systems on Injection Molding Machines have made machines more economic and user friendly. Consequently old machines are becoming burden on user. We are committed to promotion of the energy conservation technology of the injection molding machine, strives to help customers promote efficiency and create value, explores the current and future demands of customers, and customizes the servo system with high cost performance by virtue of the professional skills. Change from high flow to small flow Meet needs and reduce flow and resource waste of special machines Change from common machine to high speed machine Consider growth, promote machine performance, and enhance competitiveness Change from common machine to special machine Meet production needs, improve efficiency or promote machine performance such as change from common machine to special machine for mobile phone