Phenix Fire Protection Systems Choolai, Chennai, Tamil Nadu

Water/Foam Nozzle – produce secondary aspirated (sometimes non aspirated) foam which have expansion ratio of 1:3 to 1:4 with Female BSP Thread Inlet.  

Triple Purpose Nozzle (G.M.) (Universal branch pipe)  having arrangement of jet, fine spray and shutoff with 63mm male inst. Inlet, duly chromplated as per IS: 2871   Also available in 38mm

Superjet Water Monitor – Stand Post Type made out of IS:1239 Seamless Steel tubes, Hot dip galvanized, flanged inlet, G.M. Ball bearings Swivel joints with brass locking arrangements, permitting 360 deg. Horizontal, 80-45 deg. Vertical traverse, with Aluminium Alloy Nozzle with male threaded inlet as per IS:8442 with ISI Mark. (Available in GM Nozzle or with 63mm G.M. Female inst. Outlet)  

Superjet Water/Foam Monitor – Stand Post Type made out of IS:1239 Seamless Steel tubes, Hot dip galvanized, flanged inlet, G.M. Ball bearings Swivel joints with brass locking arrangements, permitting 360 deg. Horizontal, 80-45 deg. Vertical traverse, with Aluminium Alloy Foam Nozzle with pickup tube as per IS:8442 with ISI Mark.  

SUPERFIRE MULTI GALLONAGE NOZZLE / UNILITE –Fire fighting nozzle, made of extruded all. Alloy hard anodized for resistance to corrosion and wear. Select ‘O' metic mode provides variable flow rates at 7 kg/cm2, 360-475-600-750 and 900 lpm and flush without shutting down. Spinning teeth ring form water curtain for cooling and operator's protection from heat. Ball valve operated flow control lever for shutting off. Inlet with 63mm male inlet conforming to IS:903, Piston grip for greater control.  

Suction Strainer Gunmetal 4” having Female Round Thread as per IS:907 (Also available in 3”)   Also available in standard quality

Suction Coupling Gunmetal 4” Male & Female Round Threaded as per IS:902. (Available in 3” also)   Also available in standard quality

  Sprinkler – Standard Response, Standard Coverage ½” BSPT, Chrome Finish K-Factor 5.6. Temperature Rating – 57, 68, 79 Deg. C.Mounting – Pendent, Upright, Sidewall & Concealed  * Available in Chrome Finish * For concealed sprinkler cover plate is with white finish or chrome finish.

Single Hose Box - Wall  mounting  type  in 600mm  X 400mm X 250mm) size to  accommodate 1  lengths  of  7.5 mtr. or 15 mtr. or 30 mtr. hoses  and a branch pipe with glass covered single door with lock and key arrangements.    Available in MS or FRP

Single Headed Oblique Type  Gun Metal Fire Hydrant Valve 2.5" (63mm),  75mm  N.B. Flanged inlet,  with  63mm Female inst. Outlet with Blank Cap and Chain as per IS:5290 with ISI mark  (Flange O.D 200mm, PCD 160mm,  4 nos X 19mm dia holes) (Also available in Stainless Steel)   63mm GM Single Headed Hydrant Valve – Commercial (Flange O.D 185mm,  ID 63mm, PCD  145mm) Also available in 38mm, 50mm – Standard Quality (GM)   Double Headed Gun Metal Hydrant  Valve 2.5" (63mm) with two  individually   controlled 63mm Female Inst. outlets, with 100  mm  N.B. Flanged Inlet, complete with male Blank Caps and  Chains  as per IS:5290 (Flange OD 220 mm, PCD 180mm, 8 nos X 19mm dia holes)   Double Headed Hydrant Valve – Commercial (Flange OD  220mm, ID 100mm, PCD 180mm)      

Short Branch Pipe Gun Metal 63mm with Detachable Hexagonal Nozzle as per IS:903 with ISI Mark (Also available in Stainless Steel or Aluminium or Copper)   Also available in 38mm, 50mm – Standard Quality – GM, Aluminium

Rubber Suction Hose - blend of natural / synthetic rubber compound with wire embedded between the reinforcement with corrugated outer layer as per IS:3549 with ISI Mark. (Type 1: WP-7 kg/cm2, Type 2: WP-10kg/cm2)   Size: 3” or 4” or 6”

Rubber Hose for Hose Reel Drum – Made of natural / synthetic rubber with plain or corrugated finish as per IS:444 with ISI Mark (Type 1: WP-6 Kgf/cm, Type 2: WP-10 Kgf/cm)   Size: 19mm or 24mm O.D.    (Also available in Commercial Quality Double Braided)    

ROSETTE PLATE – Single leaf rosette plate either in chrome plate or White finish (Also available in Stainless Steel)  

Revolving Nozzle (G.M.) with 63mm male inst. Inlet duly chromplated as per IS:906 (Flange Connection also available)  

RRL (Reinforced Rubberlined) Fire Hose Type B Non Percolating Fire Hose Completely composite construction circularly woven 3 layered synthetic jacketed fully encapsulated with a specially formulated elastomer, resistant against grease, oils, acids, ozone, fungus, alkalies, heat and other chemicals with outer design to facilitate a good grip, completely flexible and lightweight, no maintenance with 42Kg/cm2 burst pressure, 25kg/cm2 proof pressure, 18kg/cm2 working  pressure as per IS:636:88  type  B   with ISI mark.  

Portable Inline Inductors – Made from Aluminium Alloy with 63MM G.M. Male Inst. Inlet in one hand and Female Inst. Outlet in other hand with Pick-up tube.  

OPTICAL SMOKE DETECTOR – Conventional type optical smoke detector with mounting base.   

NUELITE NOZZLE – Professional fire fighting nozzle made of die-cast, al. alloy, having arrangement for constant flow at straight jet/wide angle fog and complete shut-off, with a pistol-grip, ball type shut-off valve with adjustable seat & suitable for flow of 400 lpm at 7 kg/cm2 with inlet of 63mm size conforming to IS:903  

Non Return Valve - Gunmetal with 63mm male inst.  

Multi Purpose Spray Nozzle (G.M) for Water / Foam Spray having arrangement of Jet, fine spray, fog, complete shutoff with adjustable flow output  with 63mm male inst. Inlet duly chromplated. (ELKHART DESIGN)  

Medium Velocity Water Spray Nozzles has an external deflector, which discharges water in a directional cone shaped pattern of small droplet size. The water is uniformly distributed over the surface to be protected. The nozzle is used in deluge water spray system for special hazard fire protection application. As the design and intent of specific water spray system may vary considerably, a MV nozzle is made available in several combination of orifice sizes and spray angles. The minimum desirable pressure to achieve a reasonable spray pattern is 1.4 Kg./Sq.cm. The water distribution pattern as shown in the graph in following pages is at an average pressure of 2.0 Kg/Sq.cm. The change in pressure between 1.4 to 3.5 Kg./sq.cm. does not affect considerable change in spray angle. The spray pattern shown is with indoor application. System designer must consider wind velocity while designing the system for outdoor application. Field obstruction if any affecting the spray pattern of the nozzle must also be considered. The nozzle may be oriented to any position which is deemed necessary to cover the hazard. Some of the areas where this system is widely used are:                     Horizontal storage vessels (like LPG Bullets, NH3 storage tanks etc.)   Vertical storage vessels (like benzene, xylene, toluene tank age etc.)   Spherical storage vessels (like LPG bullets, spheres etc.)   Spot protection (Protection of selective areas/ equipments)    Maintenance  Use Teflon tape or soft thread sealant on male thread of the nozzle. The nozzles must be hand tightened into the fitting. LIFECO make wrench must be used to tighten the nozzle unit into the fitting. Excessive tightening torque may result into serious damage to nozzle arms and the deflector which may affect spray pattern of the nozzle and it's performance.

MEDIUM VELOCITY SPRAY NOZZLE – Made of Brass or SS with ½” BSPT end connections. K-factor: Metric - 22,30,35,41,51,64,79, 91 & 102 Spray angle - 65°,80°,90°,100°,110°,120° & 140°

Medium Expansion Foam Branches – To produce stable, superior quality medium expansion foam with 63mm G.M. male inst. Inlet. (Made of SS 304 or Aluminium Barrel)