Ruhrpumpen Gmbh T. Nagar, Chennai, Tamil Nadu

The ZW pump is a horizontal, single stage, axially split case centrifugal pump designed and built according to the Hydraulic Institute (HI) standard (BB1 type). It is part of the HS/ZW range of split case pumps by Ruhrpumpen which includes the: HSC, HSD, HSL, HSR, and HSM models. Operation limits Applications Petrochemical, general industry applications, power generation plants, municipal water systems, mining operations, fire protection service.

Head : Up To 340 M (1,115 Ft)

Capacity : Up To 9,000 M³/h (34,400 Gpm)

Range : HS/ZW

Models : HSC,HSD,HSL,HSR,HSM

Maximum Pressure : Up To 98 Bar (1,421 Psi)

Temperature : Up To 120°C (248°F)

The ZMS is a two stage, main pipeline, horizontal pump for the most stringent demands in process and transfer services. Its design includes a first stage double suction impeller for NPSH optimization and a between bearing design perfect for petrochemical applications, as it complies with the API 610 standard (BB1 type). Operation limits Discharge flanges sizes 4' to 40'Applications Pipeline services: Mainline and Booster, Oil-extraction technology: on land and offshore, Refinery technology, Chemical / Petrochemical industries, General industry, Metallurgical and steel industries, Combined heating and Power stations

Head : 10 To 1,200 M

Capacity : 100 To 20,000 M³/h

Maximum Pressure : Up To 145 Bar

Temperature : Up To 205°C

Discharge Flange Sizes : 4' To 40'

The process and transfer pump of ZM I x2 design was developed for stringent demands. This is a two stage horizontal pump for higher pressure applications. Operation limits Applications Pipeline services: Mainline and Booster, Oil-extraction technology: on land and offshore, Refinery technology, Chemical / Petrochemical industries, General industry, Metallurgical and steel industries, Combined heating and Power stations.

Head : 16 To 400 M

Capacity : 150 To 10,000 M³/h

Maximum Pressure : Up To 40 Bar

Temperature : -10 To 220 °C

Speed : Up To 3,600 Min-1

The ZM pump is designed for stringent demands in process and transfer services. Engineered to comply with the latest edition of API 610, these horizontal pumps with double suction impeller and a between bearing design are perfect for petrochemical applications. It can also be used for applications like cooling water pumping stations at low speeds. Operation limits Applications Pipeline services: Mainline and Booster, Oil-extraction technology: on land and offshore, Refinery technology, Chemical / Petrochemical industries, General industry, Metallurgical and steel industries, Combined heating and Power stations.

Head : 10 To 1,200 M (30 To 3,900 Ft)

Capacity : 100 To 20,000 M³/h (440 To 88,057 Gpm)

Maximum Pressure : Up To 145 Bar (2,103 Psi)

Temperature : Up To 205°C (401°F)

Discharge Flange Sizes : 4' To 40'

The process and transfer pump of ZLM design was developed for stringent demands. Is a special main pipeline pump recommended for applications with change of the flow during the lifetime of a pipeline. Operation limits Applications Pipeline services: Mainline and Booster, Oil-extraction technology: on land and offshore, Refinery technology, Chemical / Petrochemical industries, General industry, Metallurgical and steel industries, Combined heating and Power stations. This pump is recommended for applications with change of the flow during the lifetime of a pipeline.

Head : 10 To 1,200 M (30 To 3,900 Ft)

Capacity : 100 To 20,000 M³/h (440 To 88,057 Gpm)

Maximum Pressure : 145 Bar (2,103 Psi)

Temperature : Up To 205°C (401°F)

Discharge Flanges Sizes : 4' To 40'

Flow Control : Change Of Flow During The Lifetime Of A Pipeline

The VTP pump line is normally designed to operate in wells or sumps. Its bowl assembly consists primarily of a suction case or bell, one or more pump bowls and a discharge case. The pump bowl assembly is positioned in the sump or well at a depth to provide the proper submergence. Operation limits

Automatic Grade : Automatic

Application : Industrial

Capacity : Up To 13,636 M³/h (60,000 U.S. Gpm)

Head : Up To 762 M (2,500 Ft)

Maximum Pressure : 74 Bar (1,080 Psi)

Temperature : 0 To 121°C (32 To 250°F)

RP's Vertical Turbine Generators are actually reverse running pumps. When the flow that runs through the pump is reversed, the impeller starts turning in the other direction and the pump operates as a turbine. Operation limits Capacity up to 6,626 m³/h (29,174 gpm)Head to 1,067 m (3,500 ft) Maximum Pressure up to 105 bar (1,523 psi)Temperature -185 °C to 121 °C (-300 °F to 250 °F)Applications Hydroelectric generators, Industrial systems, Water transportation systems, Dams, Reverse osmosis, Oil supply systems, Chemical & Petrochemical processes, Cryogenic closed systems

Automatic Grade : Automatic

Capacity : Up To 6,626 M³/h (29,174 Gpm)

Head : Up To 1,067 M (3,500 Ft)

Maximum Pressure : Up To 105 Bar (1,523 Psi)

Temperature : -185°C To 121°C (-300°F To 250°F)

Vertically suspended, single casing, sump pumps for wet pit applications in Standard and Non-Clog models. Operation limitApplications Sump Drainage, Flood Control, Air Wash Systems, Power Plants, Industrial Processes, Condensation Control, Hydrocarbon Processing, Pharmaceuticals, Wet Pit, Water Treatment, Dewatering Service, Automotive Solvents.

Capacity : Up To 1,200 M³/h

Head : Up To 130 M

Maximum Pressure : Up To 40 Bar

Temperature : Up To 200 °C

Sump Depth : Up To 6.1 M

Usage : Industrial

The VSP Chem is a chemical sump pump with a semi-open impeller, designed for corrosive wet pit applications. API design is available upon request. Operation limits Applications Special for Chemicals and Corrosive Substances, Hydrocarbon Processing, Chemical Processing.

Capacity : 2,317 M³/h (10,200 Gpm)

Head : 160 M (525 Ft)

Maximum Pressure : 40 Bar (580 Psi)

Temperature Range : 0°C To 205°C (32°F To 400°F)

Sump Depth : 6.1 M (20 Ft)

Usage : Industrial

We offer a high-performance Vmt Vertical Process Pump designed for Oil & Gas applications. With a capacity of up to 90 and a maximum head of 900 M, this pump can handle demanding tasks with ease. It operates at pressures up to 90 Bar and temperatures ranging from -196 to 250 °C (-320 to 500 °F). As a leading Manufacturer in the industry, we provide reliable and efficient solutions for your pumping needs. Trust our Vmt Vertical Process Pump to deliver exceptional performance in challenging environments.

Application : Oil & Gas, Power Generation, Municipal

Capacity : Up To 90,850 M³/h (400,000 Gpm)

Head : Up To 900 M (3,000 Ft)

Maximum Pressure : Up To 90 Bar (1,300 Psi)

Temperature : -196 To 250 °C (-320 To 500 °F)

We offer the Vlt Vertical Process Pump with VS1 configuration, capable of handling capacities from 100 to 1 and heads up to 1. With a maximum pressure of 140 Bar and a wide temperature range of -195 to 565 °C, this pump is ideal for various industrial applications. As a leading manufacturer, we ensure top-quality products that meet your specific needs and deliver reliable performance in demanding environments.

Configuration : VS1,VS6

Capacity : 100 To 1,600 M³/h (7,000 Gpm)

Head : Up To 1,494 M (4,900 Ft)

Maximum Pressure : 140 Bar (2,020 Psi)

Temperature : -195 To 565 °C (-320 To 1,050 °F)

The cryogenic VLT pump is a vertical “canned” pump consisting of a multi-stage bowl assembly, a suction barrel, nozzle head and a directly connected vertical driver.

Application : Cryogenic Applications

Capacity : 100 To 1,600 M³/h

Head : Up To 1,494 M

Maximum Pressure : 140 Bar

Temperature : -195 To 565 °C

Vertical, single and multi-stage, turbine pumps for firefighting applications. UL listed and FM approved pump for suction lift conditions. Operation limits Applications Commercial, municipal and residential high-rise buildings, Large industrial premises and storage warehouses, Offshore and remote facilities, Airports, Power stations.

stage : Single-stage, Multi-stage

Pressure Range : 40-519+ PSI

Flow Rate Range : 250-5000 GPM

Drive Type : Electric, Diesel

The VCT product line includes the HX, KX, MX, RX, SX, TR, VMF, VX and WX pump models for Wet Pit Applications. Operation limits Capacity up to 68,137 m³/h (300,000 U.S. gpm)Head up to 100 m (330 ft) Maximum Pressure up to 20 bar (285 psi)Temperature -30 °C to 135 °C (-20 °F to 275 °F)Applications Conventional Steam, Combined Cycle, Integrated Gasification Combined Cycle, Cooling Towers, General Offshore, Crude Handling and Treatment, Heavy Oil and Upgrading, Water Injection, Water Handling and Treatment, Circulating Water, Geothermal Energy.

Capacity : 68,137 M³/h (300,000 U.S. Gpm)

Head : 100 M (330 Ft)

Maximum Pressure : 20 Bar (285 Psi)

Temperature Range : -30°C To 135°C (-20°F To 275°F)

Usage : Wet Pit Applications

Maximum Temperature : 135°C (275°F)

Minimum Temperature : -30°C (-20°F)

The VAF pump family is comprised by the VPO, PV, PMR and PVD models and is suited for applications that require large quantities of flow with low head. Operation limits Applications All applications that require large quantities of water with low head, including: drainage, flood control, irrigation, waste treatment plants, condenser cooling, construction dewatering and raw water intakes.

Application : industrial

Warranty : 1year

Models : VPO,PV,PMR,PVD

Suitable For : Applications Requiring Large Flow With Low Head

Capacity : 22,712 M³/h (100,000 Gpm)

Head : 18 M (60 Ft)

Maximum Pressure : 2 Bar (26 Psi)

Temperature Range : 0 To 95 °C (32 To 203 °F)

The SWP is a self-priming pump for solids handling applications. It can handle clear liquids or with solids. Its large volute design allows automatic repriming in a completely open system without the need for suction or discharge check valves. Operation limits Capacity up to 1,440 m3 /h (5,280 U.S. gpm)Headup to 45 m (147 ft) up to 70 °C up to 158 °F

Capacity : Up To 1,440 M3/h Or 5,280 U.S. Gpm

Priming : Automatic Repropriming

System Requirement : No Need For Suction Or Discharge Check Valves

Head : Up To 45 M Or 147 Ft

Our submersible pump lines include the SMF, the SHS and the NE for drainage, sewage, dewatering and industrial applications. Applications SMF: irrigation and drainage, cooling water intake, lifting water, industrial water supply, flood control. SHS: sanitary waste, industrial waste, water treatment, storm water, process wastes, pollution control, cannery wastes, meat process wastes. NE: general industry, cooling water, irrigation and drainage, disposal of water, mixed water.

Type : Submersible Pump

Lines : SMF,SHS,NE

Capacity : Up To 40,000 Gpm (9,000 M³/h)

Head : Up To 240 Ft (73 M)

Material : Metal

The type STV pump is the vertical variant of the ST pump, with non-clogging and non-stringing two-channel impeller in pot design. The STV is suitable for pumping sewage with coarse solid matter and fibrous content without upstream screen. For horizontal installation check the ST pump model. Operation limits

Capacity : 400 To 8,500 M³/h (1,750 To 37,500 Gpm)

Head : 3.5 To 32 M (11.5 To 105 Ft)

Maximum Pressure : Up To 4.5 Bar (65 Psi)

Temperature Range : -10 To 80°C (14 To 176°F)

Speed : Up To 1,180 Rpm

The ST model is a horizontal centrifugal pump with a non-clogging and non-stringing two-channel impeller. It is engineered for dry installation and universal use in the water and wastewater market, suitable for pumping sewage with coarse solid matter and fibrous content without upstream screen. For vertical installation check the STV pump model. Operation limits Discharge flanges sizes 12'' to 28''Applications Disposal or wastewater, Raw sewage, Activated sludge, Mixed water, Fecal matter, Rain water

Head : 3.5 To 32 M (11.5 To 105 Ft)

The SPN is a vertical in-line, single stage, single suction centrifugal pumps accordance to API 610 latest edition (OH5 type) and mechanical seal chamber in accordance with API 682 Operation limits Capacity up to 550 m³/h (2,420 gpm)Head up to 280 m (920 ft) Maximum Pressure up to 40 bar (600 psi)Temperature -80 to 260 °C (-112 to 500 °F)Applications Petroleum refining, Oil & gas production and distribution, Petrochemical applications, Chemical and process industries

Capacity : Up To 550 M³/h (2,420 Gpm)

Head : Up To 280 M (920 Ft)

Maximum Pressure : Up To 40 Bar (600 Psi)

Horizontal, single and two stage, split case fire pumps for firefighting applications. NFPA-20 design. UL Listed and FM Approved. Operation limits Applications Commercial, municipal and residential high-rise buildings, Large industrial premises and storage warehouses, Offshore and remote facilities, Airports, Power stations

Usage : Firefighting Applications

Design Standard : NFPA-20

Certifications : UL Listed, FM Approved

Pressure Limits : 40 To 355+ PSI

Flow Limits : 150 To 5000 GPM

The SPI model is a heavy-duty, vertical in-line, single stage, single suction centrifugal pump designed in accordance to the latest API 610 (OH3 type) standard. Operation limits Capacity 2.5 to 615 m³/h (11 to 2,700 gpm)Head 15 to 290 m (52 to 950 ft) Maximum Pressure up to 40 bar (600 psi)Temperature up to 260 °C (500 °F)Applications Petroleum refining, Oil & gas production and distribution, Petrochemical applications, Chemical and process industries

Capacity : 2.5 To 615 M³/h (11 To 2,700 Gpm)

Head : 15 To 290 M (52 To 950 Ft)

Maximum Pressure : Up To 40 Bar (600 Psi)

Temperature : Up To 260°C (500°F)

Standard : API 610 (OH3 Type)

The type SMI is a heavy-duty, horizontal, axial split casing, volute type, multi stage, centrifugal pump according to API 610 (BB3 type) latest edition. Engineered to be robust and reliable, with hydraulic balance obtained by arranging the impellers in opposed groups. Applications Oil Fields and Terminals, Crude Oil and Oil Product Pipelines, Water Pipelines, Fluid Injection, High Pressure Services, Power Plants

Capacity : 50 To 3,000 M³/h (220 To 13,209 Gpm)

Head : 200 To 3,000 M (656 To 9,843 Ft)

Maximum Pressure : 420 Bar (6,000 Psi)

Temperature : Up To 205°C (400°F)

Speed : 2950 Min At 50Hz / 3550 Min At 60Hz

The SMF is a vertical submersible mixed flow pump for installation in a steel tube or a concrete well. Its hydraulic improvements guarantee a better performance and a lower total cost for end users. Operation limits Applications Commercial and industrial water processing applications: agricultural irrigation, drainage, cooling water circuits, industrial water supply, water lifting, municipal water systems.

Head : Up To 20 M (65 Ft)

Material : Steel, Concrete

Installation : Steel Tube, Concrete Well

Capacity : Up To 9,000 M3/h (40,000 Gpm)

Maximum Pressure : Up To 10 Bar (150 Psi)

Temperature : 0 To 150°C (300°F)