TECHNICO LABORATORY PRODUCTS PVT. LTD. Thirumudivakkam, Chennai, Tamil Nadu

Storage cupboard are suitable for wall mounting above the worktable. Ideal for storing important chemicals, reagents, etc., two adjustable shelves are provided with sliding glass doors and locks. The Cupboard is made of CRCA / G.I sheet metal with Epoxy powder coating.

The design of the Work Tables are made to fit in any kind and any shape of Laboratory to give maximum flexibility and utility. The Tables are made of High Grade Electro Galvanized Steel of 20 Swg finished in Epoxy Polyster Powder Coating finish with high quality Granite work Tops. OPTION : Imported Epoxy Work Tops Work / Wall Table width are normally 750mm or 900mm with height of 750mm or 900mm. Options of with Knee Hole and foot rest or Continuous Modules are available.

VERTICAL STORAGE CABINETS Storage cabinets have three vertical sliding racks. Each rack has shelves. Designed specially to store small laboratory reagents, chemicals, etc., The Cabinet is made of CRCA / G.I sheet metal with Epoxy powder coating.  

Vertical Laminar Airflow directs the air through PRE filter from top bottom level of cabinet and the air flows vertical down flow through HEPA filter towards the work area. Again the air is discharged back to the room. Thus vertical laminar flow cabinet provides only product protection.

We are the main supplier of this product.

Number Of Flower : Vacuum Pumps

Power : 1-3kw, 3-6kw, 6-9kw, 9-12kw

Pressure : High Pressure, Low Pressure, Medium Pressure

Total Carbohydrate : 1year

Driven : Electric

We are the main supplier of this product.

Number Of Flower : Apparatus, Electrical Apparatus

Application : Steam Distillation, Water Distillation

Availability : 10-20kg, 20-30kg, 30-40kg

Country of Origin : 110V, 220V

Condition : New, Used

Capacity : 20L/Hr, 40L/Hr

Power : 0-100W, 100-200W, 200-400W

Driven Type : Electric, Solar

Temperature Range : 0-5 Deg C, 5-10 Deg C

Total Carbohydrate : 1yrs

Automation Grade : Automatic, Fully Automatic, Manual

This is very useful for distillation purpose for 300 ml or 500 ml. The unit is provided with condenser rack. The unit works on 220 / 230 V A.c. supply.    Model : Mantle type - 3 test   Rating : 200 watts x 3 – 600 watts   Model : Mantle type - 6 test   Rating : 500 watts x 6 3000 watts.

This is very useful of nitrogen content in the substance by digestion for 300 or 500 ml. Capacity flasks provided with LEAD FUME DUCT and pair of hangers. The unit works on 220 /230 V A.C supply.    Model : Mantle type - 3 test   Rating : 200 watts x 3 – 600 watts   Model : Mantle type - 6 test   Rating : 500 watts x 6 3000 watts  

These Rotary oil- sealed pumps are quite operating and vibration less designed for continuous working and tested to assured satisfactory performance of the pump. Mechanism is contained in a metal case with oil level sight gauge and drain plug at base. Motor driven pumps are completely mounted on rectangular base plate and are furnished with V belt & motor. Supplied with non return valve & vacuum gauge.   STAGE SINGLE STAGE DOUBLE STAGE Pumping speed ltr 50 100 150 200 50 100 150 200 Motor speed ( RPM)   550 550 550 550 550 550 550 550 Motor power (H.P) 1/4 1 /4 1/2 1/2 1/4 1/4 1/2 1/2   Optional Extra : Vacuum Gauge (Dial type with regulator).  

Doyble walled chamber, outer chamber rectangular in shape made of thick mild steel sheets. The inner chamber is RECTANGULAR in shape made of stainless steel sheets with provision for vacuum pump and the vacuum gauge is provided at the top of unit. The inner chamber accommodates one no. Stainless steel tray at adjustable height. The oven is insulated with special grade glass wool to reduce the radiation heat loss to the minimum. The door is of stainless steel plate with a specially designed Mechanism having alignment. A perfect seal is obtained by a positive screw specially designed tightening lid. A glass window is provided in the center for viewing without opening the door. A set of bound heaters is wrapped around the vacuum chamber for fast response and maximum uniformity of heat. The temperature is indicated and controlled by a microprocessor based PID temperature indicator cum controlled by a microprocessor based PID temperature indicator cum controller working in conjunction with RTD sensor.   A compact model control panel accommodating, pilot indicating lamps, PID temperature controller, will be fitted on the side of the oven. For easy operation.   Chamber size (diameter x ht) mm 300 x 300 x 350 Maximum temperature ° C 200   Optional:  Belt driven / Direct drive Vacuum pump,   Analog / Digital pirani Gauge , Gas ballast and KF couplings.  

Double walled chamber, outer chamber rectangular in shape made of thick mild steel sheets. The inner chamber is Cylindrical in shape made of stainless steel sheets with provision for vacuum pump and the vacuum gauge is provided at the top of unit. The inner chamber accommodates one no. Stainless steel tray at adjustable height. The oven is insulated with special grade glass wool to reduce the radiation heat loss to the minimum. The door is of stainless steel plate with a specially designed Mechanism having alignment. A perfect seal is obtained by a positive screw specially designed tightening lid. A glass window is provided in the center for viewing without opening the door. A set of bound heaters is wrapped around the vacuum chamber for fast response and maximum uniformity of heat. The temperature is indicated and controlled by a microprocessor based PID temperature indicator cum controlled by a microprocessor based PID temperature indicator cum controller working in conjunction with RTD sensor. A compact model control panel accommodating, pilot indicating lamps, PID temperature controller, will be fitted on the side of the oven. For easy operation.   Chamber size (diameter x depth) mm 200 x200 250 x 250 250 x 300 300 x 300 Maximum temperature ° C 200 200 200 200

The inner chamber accommodates one no. easily removable stainless steel tray at adjustable height and is provided with a shaking platform with threaded stainless steel clamps for holding conical flasks from 250 ml to 1000 ml capacity. Illumination inside the chamber is provided by fluorescent tubes. An outer double door with inner full view acrylic door permits inspection of specimens. Heating is by Kanthal A1 Coils. Temp. is controlled by a digital indicator cum controller working in conjunction with PT 100 sensor. Powerful air circulator creates positive air flow through the incubator. Evaporating coils are placed at the rear side of the inner chamber. CFC free refrigeration system includes Emerson Copeland make hermetically sealed compressor air cooled condenser unit and accessories. Refrigeration System is provided at the lower potion of the chamber. The shaker is driven by a variable DC motor with variable speed control. The speed is indicated RPM indicator for digital display of speed with present facility. The control panel accommodating, digital controller, pilot indicating lamps, On / off switches, digital RPM indicator, etc, will be provided at the top of the unit. Supplied complete with one no. shaking platform.   TECHNICAL SPECIFICATIONS: Chamber size : 600 x 600 x 600 mm   Platform holding capacity : 9 nos. x 1000 ml or 16 nos. x 500 ml. or 25 nos x 250 ml.   Temperature range : ± 5 ° C to 6 ° C.   Temperature accuracy : ± 1 Deg. C   Shaking speed : 50 to 250 rpm   Operating voltage : 230 volts single phase 50 cys.   OPTIONAL: Spare shaking tray for holding:  Cyclic Timer   Chamber illumination by fluroscent lamps or UV lamps.   Spare platform for holding flasks   Microprocesssor based Digital PID controller SSR output for better accuracy.  

Designed for continuous shaking of solutions in Erienmeyer flasks. It is a compact bench type table top model with platform fitted with lotus clamps mounted on a ball bearing crank shafts to give an orbital motion to the flaks with in a diameter of 25 mm. A see through acrylic cover is provided. Heating system with air circulation is also provided. Temperature controlled by digital temperature controller & fitted to air circulating fan for temperature uniformity. The DC motor with variable speed control is covered by means of a V belt with pitch pulley & is mounted on a heavy sturdy angle iron frame. The speed is indicated in RPM indicator. Designed to work on 220/230 V AC supply.   TECHNICAL SPECIFICATIONS:  Temperature range Ambient + 5 ~ 70°C   Accuracy: ± 1 ~ 2°C   OPTIONAL: Timer   Additional platform   Microprocessor based digital PID controller with SSR output for better accuracy.  

Designed for continuous shaking of solutions in Erlenmeyer flasks. It is a compact bench type table top model, counter balanced drive mechanism for high stability and dependability for continuous operation. Platform fitted on ball bearing crank shafts for giving an orbital motion to the flasks within a Ø of 25 mm. Platform provided with lotus clamps for holding the flask. A geared variable speed DC motor with variable speed control, mounted on a heavy & sturdy angle iron frame. A speed indicated by digital RPM indicator. Designed to work on 220/230 V AC. Heated by energy efficient heaters & controlled by microprocessor based digital controller with LED display with RTD sensor. The bath is provided with an oscillating tray riding on rollers oscillated through a PMDC motor for continuous operation. The shaking tray can either hold test tube or Erlenmeyer flask of capacity 25 ml. or 50 ml. or 100 ml. or 250 ml. or 500 ml. or 1000 ml. as ordered by the users. Electronically controlled shaking mechanism provides quick reciprocating motion & speed control. The unit is fixed with DC drive for speed range from 20 ~ 200 cycles per minute. Built in front control panel accommodating all the controlling device located at the side of the bath for operational convenience.   COOLING OPTION: CFC pre refrigeration system provided at the lower portion for controlling the temperature from 0 ~ 100°c   TECHNICAL SPECIFICATIONS:  Inner chamber size : 405 x 300 x 150 mm   Holding capacity: 250 ml. x 9 nos. conical flask   Temperature range: 0 ~ 100°C ± 0.5°C   Shaking speed: 40 ~ 140 cycles   Power rating: 2.5 kw (app.)   Operating voltage: 220 ~ 230 V single phase 50 cys   OPTIONAL:  Spare shaking tray for holding:   12 nos. x 100 ml. conical flask or   9 nos. x 250 ml. conical flask or   5 nos. x 500 ml. conical flask or   35 nos. x Ø 25 mm test tubes   Platform size (cm) Holding capacity 45 x 45 9 flask x 500 ml. 16 flask x 250 ml. 60 x 60 25 flask x 500 ml. 36 flask x 500 ml. 90 x 90 49 flask x 500 ml. 81 flask x 350 ml.  

Inner is made of SS-304 & outer fabricated out of cold rolled MS sheets with powder coating. The paramedical lid is made of SS prevents falling of condensed water droplets on the specimens. The inter space between the two walls is tightly packed with special grade glass wool in order to prevent thermal losses. Heated by energy efficient heaters & controlled by microprocessor based digital controller with LED display with RTD sensor. The bath is provided with an oscillating tray riding on rollers oscillated through a PMDC motor for continuous operation. The shaking tray can either hold test tube or Erlenmeyer flask of capacity 25 ml. or 50 ml. or 100 ml. or 250 ml. or 500 ml. or 1000 ml. as ordered by the users. Electronically controlled shaking mechanism provides quick reciprocating motion & speed control. The unit is fixed with DC drive for speed range from 20 ~ 200 cycles per minute. Built in front control panel accommodating all the controlling device located at the side of the bath for operational convenience. COOLING OPTION: CFC pre refrigeration system provided at the lower portion for controlling the temperature from 0 ~ 100°C TECHNICAL SPECIFICATIONS:     Inner chamber size : 405 x 300 x 150 mm   Holding capacity: 250 ml. x 9 nos. conical flask   Temperature range: 0 ~ 100°C ± 0.5°C   Shaking speed: 40 ~ 140 cycles   Power rating: 2.5 kw (app.)   Operating voltage: 220 ~ 230 V single phase 50 cys     OPTIONAL: Spare shaking tray for holding:   12 nos. x 100 ml. conical flask or   9 nos. x 250 ml. conical flask or   5 nos. x 500 ml. conical flask or   35 nos. x Ø 25 mm test tubes    

Technico salt spray test chamber entire is constructed by thick polypropylene or acrylic sheet body. The top lid door will be made of transparent Acrylic. The solution reservoir is separated externally in a cylindrical vessel and fixed to the side of the main chamber. The solution is sprayed inside the chamber by means of compressed air (Air compressor not in our scope) and its level is controlled by float valve. The main chamber is provided with transparent acrylic cover lid mounted on fabricated acrylic hinges. The top lid closes the entire chamber without fog leakage. The saturation tower and the control panel are attached with the sidewall of the main chamber. The control panel is made of FRP material. Solution and water drain out tap are also provided. Suitable specimen holders and job holding devices are furnished inside the chamber.   Technical Specification: Chamber temp. : 35 C   Control accuracy : 3 C   Saturation tower temp. : 40 C to 45 C.   Controller type : PT- 100( RTD type)  Temperature controller:  Size : 48 x 48 mm   Type : Digital  Humidity Indicator:  Size : 48 x 48 mm   Type : Digital  Digital Timer:  Make : Selectron   Size : 72 mm x 72 mm   Hours : 999.9 hrs  Pressure gauge:   Range : 0 – 4.2 kg/cm2   Range : 1 kg/cm2 (saturation tower).   Solution tank : 5 % of the sodium chloride (100 lit) is prepared and poured in the chamber reservoir. It is passed to the spray tower through the mechanical float through which is maintaining the water level in the tower. POWER SUPPLY: The chambers plug pin should be connected to the power supply & the timer to be set according to the testing hours.   PRESSURE REGULTOR WITH GAUGE: The compressed air enters to the solenoid valve. It is controlled by the help of pressure regulator (15 lbs.) in pressure gauge. When the testing specimen or components are loaded to the chamber. The drain out valve is kept open because the condensed for water should not touch the specimens   STANDARD SIZE: 600 x 600 x 600H or 600 x 900 x 900H.

Technico environmental / stability chamber is a doubled walled chamber. The inner chamber is made of 304 stainless steel material with mirror finish. The outer wall is made of mild steel with powder coating finish or alternately stainless steel 304 with or without epoxy powder coating finish for excellent looks. This is a double walled construction, interior made of thick gauge stainless steel sheets of 304 grade and exterior made of cold rolled mild steel sheets finished in powder coat. Inter space in between the walls is packed with glass puff. The door is doubled walled having toughened glass window and seals against atmospheric infiltration by rubber gasket. The inner chamber accommodates stainless steel trays at adjustable height. Heating elements are made of nichrome heating coils evenly distributed at the back side of the chamber. Forced Air circulation fan assembly is incorporated to maintain uniform temperature inside the working chamber. Temperature below ambient is achieved by refrigeration system consists of evaporator coils, compressor, condenser, fan motor and accessories. Humidity is attained by the mist of water that is circulated inside the chamber for maintaining 40 % to 95 % humidity. A water reservoir will be provided with auto law level water cut off device and alarm. Humidity is controlled by a microprocessor based PID humidity controller, with sensitivity of 3 %. Temperature below controlled by microprocessor based PID temperature controller from + 10 to 60 °C with an accuracy of 1 ° C. A compact control panel with switches, indicating lamps, digital PID controllers etc, is located at the side of the chamber for operational convenience. Illumiation is provided with Fluroscent lamps with cyclic timer.   Technical Specification: No. trays : 2 or 3   MOC of Trays : SS 304   Temp. controller : Microprocessor based PID type   RH Controller : Microprocessor based PID type   Power supply : 230 V AC, single phase / 415 V, 3 phase, 50 cys.   Temperature Range : 15 to 60 degs C ± 1 degs C   Humidity Range : 45 % to 95 % ± 3% RH   Temp.range for RH operation : 20 to 60 Degs C only.   Options: Timer, voltage stabilizer, Programmable controller, Recorder, PC interface small & bigger sizes also available based on request.   Standard Chamber size (L ) x ( W) x (H) mm Power Rating kw 455 x 455 x 710 3.0 605 x 605 x 605 4.0 605 x 605 x 910 4.5  

Technico Humidity Test chamber is a double walled chamber. The inner chamber is made up of 304 stainless steel material with mirror finish. The outer wall is made of mild steel with powder coating finish or alternatively stainless steel 304 with or without epoxy powder coating finish for excellent looks. The chamber is provided with a doubled walled door with a toughened glass viewing window which allows inspection of samples without disturbing the temperature inside the chamber. The door is mounted on heavy duty plate hinges with effective locking arrangement & seal against atmospheric infiltration by resilient magnet gasket. A second door made of clear Acrylic will be provided mounted on SS hinges and with magnetic catch to enable full visibility of the inner chamber keeping minimum loss of the test process conditions. The inner space in between the inner and outer wall is insulated and tightly packed with PUF to ensure effective thermal sealing. Heating elements are made from imported nichrome wires evenly distributed at the back side of the chamber. Forced air circulation fan assembly is incorporating heavy duty sealed CFC free compressor of Emerson compressor of emersion cope land make having condenser reservoir, cooling fan assembly and filled with suitable Refrigerant gas which will be circulated throughout the inner chamber for effective uniform temperature upto 20 deg. C. Cooling system is provided of the bottom portion of the chamber. The RH / Humidity can be controlled from 45 % RH to 95 % RH in the temperature range of 20 to 60 degs C. The RH is control within the range by a smart Microprocessor base PID controller with RH sensor. Technical Specification:  No. trays : 2 or 3   MOC of Trays : SS 304   Temp. controller : Microprocessor based PID type   RH Controller : Microprocessor based PID type   PT 100 sensor for temperature sensing.   Power supply : 230 V AC, single phase   Temperature Range : 15 to 60 degs C ± 1 degs C   Humidity Range : 45 % to 95 % ± 3% RH   Temp.range for RH operation : 20 to 60 Degs C only   Options: Timer, voltage stabilizer, Programmable controller, Recorder, PC interface small & bigger sizes also available based on request.   Standard Chamber size (L ) x ( W) x (H) mm Power Rating kw 455 x 455 x 710 3.0 605 x 605 x 605 4.5 605 x 605 x 910 4.5    

Techinco Hot & cold chamber is a sturdy, triple walled construction, interior made of 304 stainless steel sheets and exterior made of cold rolled mild steel / Electro- Galvanized sheet steel. The inter space in between the walls is tightly packed with 75 mm PUF insulation to minimize thermal loss. The chamber is provided with double walled door with toughened glass viewing window which allows inspection of samples without disturbing the temperature inside the chamber. The door is mounted on heavy duty chromium plated hinges and with effective locking arrangements and seals against atmospheric infiltration by resistence silicon rubber gasket. Heating elements are made of imported nichrome wires evenly distributed on the three sides. The temperature below ambinent is achieved by incorporating heavy duty sealed CFC free compressor of emersion cope land make having condenser reservoir, cooling fan assembly and filled with suitable Refrigerant gas which will be circulated through out the inner chamber for effective uniform temperature. The temperature within the range is a controlled and indicated by Microprocessor based PID Controller or optionally a smart range Microprocessor based Programmable PID controller with PT 100 sensor. The Microprocessor based programmable PID controllers will have multi – segments (heat, cool & soak) having multi program. The operating time for the chamber can be set by means of a automatic timer provided in the control panel. A compact control panel accommodating all controlling switches, indicating lamps, Temperature controllers are located on the side of the chamber for operational convenience. Option : RS 232 Computer interfacing. In addition user friendly software will be incorporated. (computer not in our scope). Technical Specification:  Temperature controlling accuracy : ± 1 to 3 ° C.   PT 100 sensor for temperature sensing.   Viewing window facility provided through toughened plane   Silicon Gasket for leak proof   Puff   High temperature chamber protection through tthermostat   Door heater provided to avoid mist formation in viewing window.   Door light provided to inspect samples at test conditions   Double stage refrigeration system with hermetically sealed Emersion Copeland   Heavy duty castor wheels for easy movement   Power supply : Single phase, 230 V, 50 Hz.   Available Temperature Ranges : - 50 Deg . C to -150 Deg. C. ± 3 Deg.C. Chamber size : 450 x 450 x 450 mm Min size. ANY WORKING CHAMBER SIZE AND TEMPERATURE RANGE CAN BE OFFERED.  

Technico tray Drier consists of a Triple walled chamber. The inner chamber fabricated out of Mild steel or 304 grade stainless steel sheet. The middle and outer chamber is made of mild steel. The inter space in between the walls is tightly packed with special grade glass wool insulation to eliminate radiation heat loss to a minimum. The chamber is provided with a double walled door double door made of mild steel or SS 304 in the front with glass wool insulation in between. The door mounted on heavy duty hinges and provided with roller type spring loaded latch. The heating elements used will be strip type heaters distributed in both sides of the drier and the terminals are neatly brought and terminated in the junction box outside the chamber. The heating elements can be easily replaced and due care is taken for easy maintenance. To achieve uniform temperature all over the inner chamber, the unit is incorporated with continuously rated powerful motor along with blower assembly will be fitted on the sides or top of the oven. The drier will be provided with adjustable opening at the top to vent moisture vapor’s produced during process. The temperature inside is maintained at any desired level within the operating range by a On / Off Digital temperature controller working in conjunction with RTD / Thermocouple placed in the hot zone. The drier will accommodates required number of trays. The trays are fabricated out of 304 grade stainless steel sheets the trays will be stainless steel trays with SS bracket runner. A compact control panel accommodating, pilot indicating lamps, On / Off switch , On /Off Digital temperature controller, MCB, Starter, units, etc., is provided at oneside of the chamber for operational convenience. Technical Specification: 12 Trays / 24 Trays / 48 Trays / 72 Trays / 96 Trays or as required.   Dimension of the inner chamber will be designed and offered as required by you .     Options: Microprocessor based PID controller   Microprocessor based Programmable controller with Thyristor control.   Timer   Trolley with trays / baskets for bigger driers.   Fully stainless steel 304 or 316 for food applications /GMP standard.   NON STANDARD SIZE CAN BE OFFERED ON REQUEST.  

Technico Industrial type oven is a Triple walled chamber, inner made of stainless steel sheets and outer made of cold rolled mild steel sheets duly finished in powder coating. Inter space in between the walls is tightly packed with special grade glass wool. The middle wall will be made of Electro Galvanized steel. Inner chamber accommodates perforated stainless steel trays at adjustable heights. Insulated double walled door in the front is provided with locking arrangements. Heating is by Kanthal A1 heaters evently distributed on the two sides / two sides and the bottom portion of the chamber for uniform heating. Temperature is indicated and controlled by Digital temperature indicator cum controller working in conjuction with FEK sensor within the operating range. Air circulating fan assembly is incorporated in the unit for maintaining uniform temperature inside the working chamber. Built in control panel accommodating all electrical / electronic accessories is provided at the side of the chamber.   Technical Specification:   Temperature range : Ambient + 5 ° C to 300 - 400° C   Temp.Accuracy : 5 ° C       OPTIONS:  Microprocessor based PID controller with SSR output   Microprocessor based PID controller with Thyristor control   Microprocessor based Programmable controller with Thyristor control.   Timer   Fully made of stainless steel.   OTHER BIGGER SIZES CAN BE GIVEN ON REQUEST The industrial Type oven can be provided with Trolley , Exhaust systems.  

Technico Hot Air oven – Thermostat model is a double walled chamber, inner made of stainless steel sheets and outer made of cold rolled mild steel sheets duly finished in powder coating. Inter space in between the walls is tightly packed with special grade glass wool. Inner chamber accommodates perforated stainless steel trays at adjustable heights. Insulated double walled door in the front is provided with locking arrangements. Heating is by Kanthal A1 heaters evently distributed on the three sides. Temperature is indicated and controlled by precision thrermostat within the opening range. Built in control panel accommodating all electricals / electronic accessories is provided of the side of the chamber. Technical Specification:   Temperature range : Ambient + 5 ° C to 250 ° C   Temp.Accuracy : 10° C   Operating Voltage : 230 Volts single phase 50 cys.   Other details as above  

Technico HOT AIR OVEN is sturdy doubled wallwd on the back and two sides with interior walls made of stainless 304 sheets and exterior made of M.S. sheets. The doors will be doubled walled and seals against atmospheric infiltration gasket. The doors will be mounted in heavy duty hinges for eazy opening and closing. Inter space in between the outer and middle wall is tightly packed with special grade glass wool. The outside skin temperature will be around 20 top 30 degs C above ambinent. The oven will be provided with required number of adjustable Trays. Suitable heater is provided which will have much longer life. The heating system will be designed for max. 250 deg. C operation with uniform temperature all over the oven chamber. An Air circulation fan with a suitable motor mounted at the back for ensuring uniform temperature throughout the heating chamber. The temperature inside the chamber is controlled by a digital temperature indicator, cum controller which will work in conjunction with a thermo couple A control panel with Digital indicator cum controller, Air circulating fan starters, indicators lamps for line and load, mains switch, fuse etc is provided.   Technical Specification: Temperature range : Ambient + 5 ° C to 250 ° C   Temp.Accuracy : 5 ° C   Operating Voltage : 230 Volts.   OPTIONS: Timer   Fully made of stainless steel.   Microprocessor based PID controller with SSR.      

Electrically operated, Body made of stainless steel. The unit is fitted with built in energy regulator and indicating lamps.     Suitable for heating cruicbles with samples.  Power supply : 230 V single- phase 50 cys. A/C   Temperature range : Ambinent ± 5 to 600 Deg. C   Power rating : 300 watts