torot equipments Porur, Chennai, Tamil Nadu

Device for producing paper, paperboard, and other fibreboards, consisting of a moving endless belt of wire or plastic screen that receives a mixture of pulp and water and allows excess water to drain off, forming a continuous sheet for further drying by suction, pressure, and heat.

Capacity : 5 ton/day,5 Ton

Frequency : 60Hz

Country of Origin : 60HP

Power : 90RPM

These sheets are very easy to install, or to be painted, polished or anodized. These sheets are strong, corrosion resistant and highly durable. Produced using high quality raw materials, these sheets are manufactured with accuracy of size.

Thickness : 3 mm

Hole Shape : Round

Surface Finish : Polished

Material Grade : SS304

Operation of the filter press proceeds by slowly filling the recesses between the plates with the sludge before applying pressures of 7−20 bar over a period of 1−2 hours. The water is forced out of the sludge under the pressures applied, the filtrate being returned to the wastewater treatment works influent.

Country of Origin : Made in India

Slat conveyors are one of the most commonly used conveyors. They use a slat & chain system to move components along an assembly line.

Speed : 210 m/min

Length : 100 feet

Number Of Flower : Inclined Conveyer

Material : MS

Automation Grade : Semi Automatic

Usage : Waste Paper Handling

Belt Width : 600 mm

Phase : Three Phase

Country of Origin : 440 V

Dimension (LxWxH) : 30m X 1.5m X 6m

Country of Origin : Made in India

A slitter machine (commonly referred to as a slitter rewinder) is a special type of equipment used to convert / slit many different materials so they can be cut down into narrower rolls. Master rolls are often made to be as large as possible in order to be cost-effective.

Material : Mild Steel

Automatic Grade : Semi Automatic

Country of Origin : Made in India

v The tangential inlet accelerates the stock to downward centrifugal motion with required velocity.v Due to centrifugal rotation of stock the impurities with high specific gravity are forced to the outer wall of the cone and downward to collect in a trap.v The cleaned stock is discharged from the cleaner through a top side accept pipe.

Capacity : 1500 LPM

Material : Stainless Steel

Finishing : Matte Finish

The Pulp Chest Agitator is composed of pulley, bracket, main shaft, base, sealing ring, packing chamber, shaft sleeve, gland, impeller, shaft cap, belt cover, bearing seat, bearing, V-belt, motor, etc. The impeller is assembled at one end of the main shaft.

Application : Industrial

Material : MS

Country of Origin : 240

Number Of Flower : Side Agitator

Country of Origin : Made in India

v Turbo Separator is widely used in the paper production industry which helps to separate unwanted waste material from pulp-like water resistance particles.

Power : 1 kW

Material : Mild Steel

Jumbo press roll usually refers to a nip that has a diameter of more than 1000mm and is made up of pressing rollers. In the manufacture of corrugated paper, cardboard, and other pieces of paper or cardboard with large basis weights, it is widely used.

Automatic Grade : Manual

v Blade type doctor assemblies typically consist of a support beam and blade which span the length of the roll face.v Whenever the roll nip is closed and rotating, the blade should be loaded against the roll.v Where applicable, the entire doctor assembly should be oscillating in a cross machine direction.

Packaging Type : Packet

Material : Stainless Steel

Slatted flooring gives better look to your farm and its It saves your 80% of labor cost on cleaning and maintenance cost. Easily washable and better waste discharge avoids fungal skin problems for pets especially on wet season.

Thickness : 40 mm

Surface Treatment : Finished

Pattern : Goat Farming and Dog Kennel

Material : VT-Plastic slatted Pet Flooring

Color : Green

Size : 1X2 Feet

Country of Origin : Made in India

Plastic perforated sheets provide excellent strength and durability. They are perforated and feature both staggered and straight pole pattern designs. They can be used with corrosion-resistant tanks, fume hoods, ducts, and spacers.

Thickness : 6 mm

A perforated metal is a piece of sheet metal that has been stamped, fabricated, or punched to create a pattern of holes, slots, and various aesthetic shapes.

Material : Mild Steel

Perforated cable tray is a kind of cable tray with holes on bottom sheet and side rails for laying power and signal cables for the purpose of distributing electricity, signaling in industrial plants, department stores, gyms, hospitals, airports and other industries.

Minimum Order Quantity : 20 Meter

Material : Stainless Steel

Number Of Flower : Perforated Cable Trays

Sheet Thickness : 6mm

Brand Name : SS

Surface Finishing : Finished

We manufacture and deliver such pulp and paper processing equipment as a fourdrinier machine, refiner, pulper, digester, chippers and chip processors, and some other special-purpose machinery.

Usage : Waste Paper Recycling

Output Paper Width : 1500mm

Country of Origin : Made in India

Capacity : More than 50 ton/day

Pipe fabrication involves assembling pieces such as elbows, tees and flanges into sections which, along with the pipe and all other equipment, can be accurately fitted together into the plant. Because of the cost and importance of such lines, pipe fabricators must assemble and weld pipes together with a high degree of precision. This requires careful thought and planning, accurate layout of work and control of welding operations as well as the competent use of jigs, templates and other precision tools.

Type : Seamless / ERW / Welded

Linear vibrating screen is a new type of vibrating screen machine, widely used in mining, coal, smelting, building materials, refractory materials, light industry, chemical industry, and other industries. The linear vibrating screen can also screen and classify powdery and granular materials, and is widely used in plastics, abrasives, medicine, grain carbon, fertilizer and other industries.

Automatic Grade : Semi-Automatic

Country of Origin : 240 V

Availability : 250kg

v An impeller is a rotating component equipped with vanes or blades used in turbo machinery (e. g. centrifugal pumps).Flow deflection at the impeller vanes allows mechanical power (energy at the vanes) to be converted into pump power output.

Material : Stainless Steel

Usage : Air Cooling

v Hydro pulper is used in paper and pulp industry for breaking waste paper and wet strength paper.v Hydro pulper is the capital machine using for pulp thick liquid board, decreased paper and wasted paper in paper-making industry.v This machine adopts the Model D structure, it has changed the inflow type of the traditional pulp machine, shorten the circular flow direction of stock.v The rotor contacts with the pulp more quickly, more frequently.v It can shorten the pulping time, save energy and increase the specific production in volume.

Material : SS , MS , CI Casting,Cast Iron, GI

Automation Grade : Semi-Automatic

Number Of Flower : Paper Puling machine

Availability : 2.5 to 3 ton

Felt stretchers are equipped with two bevel gear or worm gear boxes connected by a cross shaft. Drived either electrically or manually. The two brackets with the spindle nut are carrying the tension roll bearing assembly which are driven by acme threaded s.s screw and are sliding on a guide pipes pipes types 1.bevel gear stretcher 2.worm and worm wheel stretcher 3.auto stretcher with pneumatic

Perforated plastic sheets are mostly 1 mm to 10 mm in diameter and can be customized. We also make the diameter the same as the thickness of punched plastic sheets. The porous plastic sheet can be used for more purposes such as venting, screening and filtering various solids.

Country of Origin : Made in India

Rolls covering with technical chromium is a treatment method aimed at imparting appropriate thermal properties or increasing resistance to mechanical wear. The chromium-plated dosing rollers prevent the material from sticking to the coating.

Application : Printing Industry

Material : Iron

Country of Origin : Made in India

It is used for de-watering of the handmade sheets, formed on the auto vat driven by an electric motor. A uniform pressure is exerted on the pulp sheets, placed between the platens. The press is also designed as per the customer's requirement for different sheet size to compress the paper for quick drying.

Usage : Paper Mill Industry

Country of Origin : Made in India

Felt and Wire Autoguide Systems are designed to keep the wire running properly in the center of the roll over which it travels. If you loose control over your wire felt or fabric, the cost incurred in damaged clothing is high. Lost production can make such accidents extremely irritating and costly. Installing the reliable and well proven automatic wire and felt guiding system represents an easy way and inexpensive way to avoid this problem. It comprises of an actuator and pneumatic controller with ceramic coated palm assembly, the Autoguide works without sliding surfaces.

Application : Metallurgy

Material : Iron

Country of Origin : Made in India

Heavy fabrication involves building large tanks, steel casing, dolphin caps, industrial steel stacks, and other large-scale projects. On the other hand, light manufacturing is used to create smaller products like household products, medical equipment, restaurant equipment, and small farming applications.

Thickness : 4mm to 8mm