CELL O CON TILE ADHESIVE is a cemenous powdery substance that forms a paste when mixed with water or some special liquid addives. This forms bedding for the les over the substrate. Tile adhesives give an excellent bond on cemenous surfaces like concrete and plaster. Tiles can be posioned over this bedding which binds them and keeps them in place. Adhesive forms a waterproof barrier between two surfaces and has excellent grab properes. CELL O CON TILE Adhesives come in different formulaons for Tile on Tile , Ceramics floor & wall Tile Adhesive , Vitrified Floor & wall Tile Adhesive . The pracce of laying the floor and wall les with the spacers is to avoid the expansion and shrinkage of les. The joint between the les can be filled with le groung of the required color.
CELL O CON TILE ADHESIVE is a cemenous powdery substance that forms a paste when mixed with water or some special liquid addives. This forms bedding for the les over the substrate. Tile adhesives give an excellent bond on cemenous surfaces like concrete and plaster. Tiles can be posioned over this bedding which binds them and keeps them in place. Adhesive forms a waterproof barrier between two surfaces and has excellent grab properes. CELL O CON TILE Adhesives come in different formulaons for Tile on Tile , Ceramics floor & wall Tile Adhesive , Vitrified Floor & wall Tile Adhesive . The pracce of laying the floor and wall les with the spacers is to avoid the expansion and shrinkage of les. The joint between the les can be filled with le groung of the required color.
CELL O CON Paver Blocks are made through the Atomized Wet Mix System.
CELL O CON Paver Tiles are manufactured with high bonding special chemicals, high quality colours with high compressive strength.
• High Compressive Strength 30 mpa to 60 mpa or required strength. Various Designs / Paterns / Colours / Sizes and Shapes.
• Easy to install and no mortar is used for installa_on.
• Used to make decoratve exterior flooring depending on the place.
• If any work needs to be done underneath, at any point of time, the block can be removed without
leaving any marks of the work
• Paver can be laid in different patterns, depending on the type of load and capacity.
• Pavers require less maintenance
• Paver block is slip resistant and skip-resistant inall climaticcconditions.
• Grass paver blocks are specially designed and made with 60mm and 40 mm thickness.
• Paver blocks last long.
CELL O CON Paver Blocks are made through the Atomized Wet Mix System.
CELL O CON Paver Tiles are manufactured with high bonding special chemicals, high quality colours with high compressive strength.
• High Compressive Strength 30 mpa to 60 mpa or required strength. Various Designs / Paterns / Colours / Sizes and Shapes.
• Easy to install and no mortar is used for installa_on.
• Used to make decoratve exterior flooring depending on the place.
• If any work needs to be done underneath, at any point of time, the block can be removed without
leaving any marks of the work
• Paver can be laid in different patterns, depending on the type of load and capacity.
• Pavers require less maintenance
• Paver block is slip resistant and skip-resistant inall climaticcconditions.
• Grass paver blocks are specially designed and made with 60mm and 40 mm thickness.
• Paver blocks last long.
CELL O CON Fly Ash bricks are lighter and stronger than clay bricks. Main ingredients include fly ash, water, lime or lime sludge, cement, and gypsum. Fly ash bricks are hi-tech, well-improved quality bricks used for the construcon of brick masonry structures. CELL O CON Fly Ash Bricks are used as a replacement for normal clay bricks and have beer properes. Fly Ash Bricks are competent in comparison to convenonal clay bricks and provide enormous indirect benefits. The ulizaon of fly ash bricks results in conservaon of natural resources as well as protecon of the environment.
CELL O CON FLY ASH BRICKS - ADVANTAGES
Uniform size
Require less quanty of cement mortar
Can be used as facing bricks
External plastering with minimum thickness Lower bulk density
More resistant to salinity and water seepage.
Heat resistant
CELL O CON Fly Ash bricks are lighter and stronger than clay bricks. Main ingredients include fly ash, water, lime or lime sludge, cement, and gypsum. Fly ash bricks are hi-tech, well-improved quality bricks used for the construcon of brick masonry structures. CELL O CON Fly Ash Bricks are used as a replacement for normal clay bricks and have beer properes. Fly Ash Bricks are competent in comparison to convenonal clay bricks and provide enormous indirect benefits. The ulizaon of fly ash bricks results in conservaon of natural resources as well as protecon of the environment.
CELL O CON FLY ASH BRICKS - ADVANTAGES
Uniform size
Require less quanty of cement mortar
Can be used as facing bricks
External plastering with minimum thickness Lower bulk density
More resistant to salinity and water seepage.
Heat resistant
CELL O CON Dry Mix Mortar (Joint Mortar) for Fly Ash Bricks and Blocks is ready to use dry mix mortar formulated by blending selected cement binders, graded aggregates and chemical addives. CELL O CON Dry Mix Mortar (Joint Mortar) is ready to use by just mixing into water at the site. This process eliminates job site mixing process of convenonal cement mortar rao by adding specified quanty of cement and sand with water separately.
CELL O CON DRY MIX MORTAR - ADVANTAGES
Internaonal, Branded Standard Polymer has been used for adhesive, bonding, flexural strength, tensile strength & compressive strength.
Water resistance more than 95%. Ready to use dry mix mortar, requires only water.
Uniform & High strength and smooth surface finish
Thin bed applicaon helps in clean and neat laying pracce, resulng in considerable saving in material consumpon
No curing required aer laying Fly Ash bricks & Blocks.
Provide sill bond beam and Lintel bond beam improves the stability of the wall and cracks in the walls will be avoided.
Bricks to be laid according to BIS 1905-1987 STORAGE: Always store CELL O CON Dry Mix Mortar in a dry place, off the ground and well covered. Reject hard or lumpy material. SHELF LIFE: CELL O CON Dry Mix Mortar's shelf life is 3 Months in ghtly sealed bags. PACKAGING : In 40 Kg bags. For Fly Ash Bricks & Blocks
CELL O CON Dry Mix Mortar (Joint Mortar) for Fly Ash Bricks and Blocks is ready to use dry mix mortar formulated by blending selected cement binders, graded aggregates and chemical addives. CELL O CON Dry Mix Mortar (Joint Mortar) is ready to use by just mixing into water at the site. This process eliminates job site mixing process of convenonal cement mortar rao by adding specified quanty of cement and sand with water separately.
CELL O CON DRY MIX MORTAR - ADVANTAGES
Internaonal, Branded Standard Polymer has been used for adhesive, bonding, flexural strength, tensile strength & compressive strength.
Water resistance more than 95%. Ready to use dry mix mortar, requires only water.
Uniform & High strength and smooth surface finish
Thin bed applicaon helps in clean and neat laying pracce, resulng in considerable saving in material consumpon
No curing required aer laying Fly Ash bricks & Blocks.
Provide sill bond beam and Lintel bond beam improves the stability of the wall and cracks in the walls will be avoided.
Bricks to be laid according to BIS 1905-1987 STORAGE: Always store CELL O CON Dry Mix Mortar in a dry place, off the ground and well covered. Reject hard or lumpy material. SHELF LIFE: CELL O CON Dry Mix Mortar's shelf life is 3 Months in ghtly sealed bags. PACKAGING : In 40 Kg bags. For Fly Ash Bricks & Blocks
CELL O CON AAC Cool Tiles will act as a light weight,water proofing, lesser dead load on the roof, less thermalconductivity and high thermal resistance material. CELL OCON AAC Cool Tiles will act as weather proof material.CELL O CON AAC Cool Tiles will save recurring energy costin air conditioning heating.
CELL O CON AAC COOL TILES - DIMENSIONS
600 x 200 x 50mm600 x 200 x 75mm600 x 200 x 100mm
This thickness for over deck insulation over theroof slab and under deck insulation below the roof slab.These AAC Cool Tiles are manufactured in the same process as for AACBlocks.
CELL O CON AAC Cool Tiles are used for over deck insulation, on the roof slab, for thermal insulation andwater proofing. These AAC Cool Tiles will be laid to therequired slope by using 50mm, 75mm and 100mm thick over the roof slab by using water proof mortar of requiredthickness
CELL O CON AAC Cool Tiles will act as a light weight,water proofing, lesser dead load on the roof, less thermalconductivity and high thermal resistance material. CELL OCON AAC Cool Tiles will act as weather proof material.CELL O CON AAC Cool Tiles will save recurring energy costin air conditioning heating.
CELL O CON AAC COOL TILES - DIMENSIONS
600 x 200 x 50mm600 x 200 x 75mm600 x 200 x 100mm
This thickness for over deck insulation over theroof slab and under deck insulation below the roof slab.These AAC Cool Tiles are manufactured in the same process as for AACBlocks.
CELL O CON AAC Cool Tiles are used for over deck insulation, on the roof slab, for thermal insulation andwater proofing. These AAC Cool Tiles will be laid to therequired slope by using 50mm, 75mm and 100mm thick over the roof slab by using water proof mortar of requiredthickness
AAC (Autoclaved Aerated Concrete) blocks is the maiden green product of our Industries India Pvt Ltd., manufactured with Internationaly proven, state of the art technology. All products are green construction materials manufactured in a fully automized plant.
standard sizes
Length 600 mm, Height 200 mm, 250 mm, 300 mm, Thickness 50 mm to 300 mm
600mm x 200mm x 100 mm
600mm x 200mm x 150 mm
600mm x 200mm x 200 mm
600mm x 200mm x 130 mm
AAC BLOCKS - PROPERTIES
Dry Density (Oven dry) : 550 - 650 kg/m3
Average Compressive Strength : 3.5 N/mm2 - 4 N/mm2
Thermal Conductivity : 0.142 - 0.24 W/Mdig.K
Drying Shrinkage : 0.01% - 0.05%
Sound Transmission :Class 37 - 44 Db
...more
AAC Block
46 - 105 /
AAC (Autoclaved Aerated Concrete) blocks is the maiden green product of our Industries India Pvt Ltd., manufactured with Internationaly proven, state of the art technology. All products are green construction materials manufactured in a fully automized plant.
standard sizes
Length 600 mm, Height 200 mm, 250 mm, 300 mm, Thickness 50 mm to 300 mm
600mm x 200mm x 100 mm
600mm x 200mm x 150 mm
600mm x 200mm x 200 mm
600mm x 200mm x 130 mm
AAC BLOCKS - PROPERTIES
Dry Density (Oven dry) : 550 - 650 kg/m3
Average Compressive Strength : 3.5 N/mm2 - 4 N/mm2
Thermal Conductivity : 0.142 - 0.24 W/Mdig.K
Drying Shrinkage : 0.01% - 0.05%
Sound Transmission :Class 37 - 44 Db
V Buildon Infra Private Limited is an Business focusing on catering Building materials, to the Construction and Infrastructure Industry. The company is having a wide range of products under its portfolio giving customers multiple choices under a single platform giving them a convenient, transparent, and hassle-free buying experience. We are dealing with leading cement manufacturing companies like Zuari Cement, Penna Cement, KCP Cement , Maha Cement, Sagar Cement and JSW Cement. We are also dealing in various building products like AAC Blocks, High density Fly – Ash Bricks, Dry mix mortar, Lighting systems and Home Automation Systems.