Cooling Towers Dealers in Kuniyamuthur, Coimbatore

• Number Of Flower: FRP Square Cooling Towers
• Material: FRP
• Certification: ISO 9001:2008
• Packaging Type: Blue, Grey
• Condition: New
• Capacity: 500-1000L
• Driven Type: Hydraulic
• Total Carbohydrate: 1year
• Country of Origin: India
• Brand Name: World Cooling Towers
• Feature: Modularity, Energy Efficiency, Compact Design, Ease Installation $ Maintenance, Corrosion Resistance
• Cooling Type: Counterflow Cooling

Based on the leading-edge cooling technology, the Wooden Cooling Tower, which we offer, is manufactured in confirmation to the set industrial standards. We offer the best Wooden Cooling Tower at the best rates. We are a dependable Manufacturer, Supplier and Exporter of Wooden Cooling Tower. Why Our Wooden Cooling Tower? High cooling efficiencyCompatible sparesEasy maintenanceLow noise Timber : All timber is Pine wood and is treated with Chromate Copper Arsenates. All plywood components are treated marine grade water proof plywood. All sections are fully machined prior to treatment. Structural Framing : Structure is bolted and is designed to withstand all operational loads and wind pressure. Hardware : Hardware such as nuts, bolts, washers, ring connectors etc. shall be Hot dip galvanized steel. Internal Fill & Fill Support : Rectangular Fill splash bars are designed to offer maximum splash and wetted surface in such a manner that it permits no dislocation of splash bars and yet allows them to expand or contract with changes in moisture content of wood without cracking, warping or sagging. Splash bars are supported in GRP grid supporters, which are firmly attached to structural girt members. Drift Eliminators : These are made of treated timber planks supported on grooved treated plywood Eliminator frame in herringbone pattern or PVC in Construction. Casing & Air Inlet Louvers : These will be made of corrugated AC Sheet or FRP Sheet. Tower corners are covered by FRP boards. Casing is water tight sealed. Air inlet Louvers are of corrugated AC Sheets or FRP Louvers. Distribution System : Cross flow towers employ a swamped pan distribution. The open pan covering the entire fill area distributes hot water evenly over the fills by means of PVC nozzles. Fan Deck : The fan deck is of FRP OR MS/HDG Construction with Motor frame & Fan Guard. Fans Dynamically balanced Cast Aluminium Alloy / FRP Fan Motor TEFC-IP 55 With EN -8/9 Shaft & Class F insulation.Direct Drive Ccs Timber Cooling Tower

Cross flow cooling towers system is a design in which the air flow is directed perpendicular to the water flow. Air flow enters one or more vertical faces of the cross flow cooling towers to meet the fill material. In this case the air that passes the water is not capable to pass waters at different temperatures. Thus the level of cross flow cooling tower in this case is less. The cross flow cooling tower is a pioneering product in design & manufacture of frp cooling towers in south india. No sprinkler distribution is possible in a cross flow cooling towers.

We are looked upon as one of the eminent Industrial Dry Cooling Towers Manufacturers in India. The Dry Cooling Towers, offered by us, are available in capacities ranging from 100 kw to 1500 kw and thousands of kilo watts could also be attained by multiplexing them. Additionally, the Natural Draft Dry Cooling Towers consumes less water and ensures high productivity and are also easy to operate & maintain.

Since years in this domain, we are engaged in manufacturing and offering a wide range of FRP Cooling Towers. Offered towers are manufactured by our skilled professionals using FRP materials and modern techniques. These are mainly used in oil refineries, power plants and petrochemical plants. Our towers have the capacity to withstand adverse impacts of contaminated water from the process industries. Additionally, FRP Cooling Towers are light in weight and hence, convenient for roof installation. Features Excellent functionality Application specific design Energy efficient

We are leading Closed Circuit Cooling Tower Manufacturer India. We also Closed Loop Cooling tower Manufacturer in India. Closed circuit cooling tower just like the open type, this type of heat exchangers are mostly in the huge industries. We manufactures two types of closed circuit cooling tower and combined flow and counterflow coolingtower. Closed Circuit Cooling Tower are suitable for Thermal Power Plants. Closed Circuit cooling tower certain processes needs a closed loop, that's why the process water for cooling does not come in make contact with the full of atmosphere air. Closed loop type cooling is minimizes process fouling.

We are leading Manufacturers of the RCC Cooling Tower in India. Our Range of RCC Coling Tower Capacity 200CuM/hr. to 3500 CuM/hr. per cell. Lofty efficiency gear boxes, axial flow fans and drive shafts.

Closed circuit cooling towers are one of the methods of heat transfers. They are hybrids that pass the working fluid through a tube bundle, upon which clean water is sprayed and a fan-induced draft applied. The resulting heat transfer performance is much closer to that of a wet cooling tower, with the advantage provided by a dry cooler of protecting the working fluid from environmental exposure and contamination.Costs Less to purchase & operate, Less Total HP required, Green solution, open towers use an efficient, simple, and economical design. This is accomplished by combining heat rejection equipment with a heat exchanger in a closed circuit tower

The Round Shape FRP Cooling Tower may call as Bottle Shape . The casing and basins are designed to withstand severe vibration, high wind load and to resist corrosion. The JC FRP Bottle shape Cooling Tower consists of Honey comb PVC fills and eliminators in a design that maximizes economy and efficiency and directly driven fan and Motor 'Minimum drift Losses'. Uniform distribution of hot water by rotating arm sprinkler. Hot dipped Galvanized hardware to withstand wind forces. The bottle shape makes possible to provide maximum cooling efficiency in minimum plan area with lower energy consumption. Specifications of Bottle Shape FRP Cooling Tower The Ranges are from 10 TR to 10000 TR. Send your requirement to get our best free quote 1. Water flow rate, 2. Hot water Inlet temperature, 3. Required cold water Outlet 4. temperature and 5. Wetbulb temperature

• Brand Name: JC Brand

dear sirmadam, greetings for the day… we jc equipments pvt ltd take pleasure to introduce ourselves as one of the leading designers, manufacturers & exporting of all kind of cooling towers,heat exchangers, Frp Seemless Cooling Tower, pressure vessels columns, storage tanks, air cooled condensers, etc... in india. jc equipments pvt ltd started in the year of 1989. we have wide knowledge in this field and we have regular customers throughout the world. we are authorized manufacturers of asme and we have “u, s & r” stamp certification also. we are corporate member of cti, usa. we are a world class manufacturers and we never compromise in quality. we assure our product will be best quality and competitive price. herewith we have enclosed the product profile for your kind reference. kindly refer the attachment. looking forward your valuable enquiry for us to quote our best and competitive offers, with assuring you of our best quality and prompt service at all times.

• Brand Name: gireesh

We are offering evaporative cooling towers of the gireesh series are designed to allow maximum flexibility of deployment. The vertical air discharge, in fact, makes the operation of the same wholly independent of the direction and intensity of the prevailing winds. In case of installation of the towers within industrial premises, there is a version with higher centrifugal ventilators, which allows the channelling of the delivery or return air. the gireesh cooling towers enjoy the best protection against atmospheric agents being wholly made of thick galvanised sheet metal, which is further protected by an appropriate paint. All electric motors and the supporting ventilators are waterproofed and of special execution, thereby ready for outdoor installation. By request towers can be supplied complete with damper control capacity – the version with centrifugal fans – installed on the lip of every fan. They can also be supplied complete with an electric pump for the circulation of cooling water and with an electrical control panel to control resistance to winter icing.

We are JC Equipments Pvt Ltd established in 1989 and also JC Equipments have 23 years experienced in the fields of Cooling Tower Manufacturer. We have member with (CTI USA) Cooling Technology Institute USA. Dry Cooling Towers are commonly used in the Power Plant, it is latest model cooling tower. A lots of power plants are cooled simply by air. Dry Cooling Tower is an equipment which is used dry cooler of defensive the working fluid from ecological revelation and contamination. There is no loss of water by evaporation because No water consumption in this type of cooling tower and also, we install the dry cooling tower in a right manner.

Counter Flow Cooling Tower   The air flow is directly opposite to the water flow in counterflow. Gravity distributes the water through the nozzles uniformly across the fill material. Advantages of the counterflow design is Spray water distribution makes the tower more freeze-resistant. Disadvantages of the counterflow design is basically higher initial and long-term cost, and Difficult to use variable water flow, as spray characteristics may be negatively affected.

The Square Shape Cooling Towers designed especially for an alternative to round model for selection to our buyers. The FRP consists of Honey comb PVC fills and eliminators in a design that maximizes economy and efficiency and directly driven fan and Motor with spray Nozzles ‘Minimum drift Losses. Hot dipped Galvanized hardware with rectangular casing body in elegant design.

We are offering dry cooling towers is equipment which is used to cool and maintain the temperature of process hot water at a particular level. This operates on the principle of heat transfer by a heat exchanger with extended fins. The fan is driven by an electric motor. our organization is engaged in offering a wide range of dry cooling towers, which is used for power generating & air compressor units and in engine water-cooling application. These are appreciated nationwide as these towers consume little water as compared to others. Our range ensures high performance and reduces the annual operating cost. combining the expertise and resources of dry cooling, we are a world leader in air-cooled condenser design, manufacturing, construction and service. We have installed hundreds of air-cooled condensers around the world for a wide range of environmental conditions: coastal and desert climates, remote industrial and urban locations and both temperate and freezing climates. We maintain a global reputation of excellence in power generation and industrial markets. The dry cooling tower is an ideal solution in any area as e.g. Hvac, industrial refrigeration, process cooling or central cooling plants.

• Material: FRP
• Features: Spray type cooling, Well developed, Best material used, Easy to install

We are Heat Transfer Equipments Pvt Ltd established in 1989 and also have many years experienced in the fields of Cooling Tower Manufacturer. We have member with (CTI USA) Cooling Technology Institute USA. Dry Cooling Towers are commonly used in the Power Plant, it is latest model cooling tower. A lots of power plants are cooled simply by air. Dry Cooling Tower is an equipment which is used dry cooler of defensive the working fluid from ecological revelation and contamination. There is no loss of water by evaporation because No water consumption in this type of cooling tower and also, we install the dry cooling tower in a right manner. Why Dry Cooling Tower? Dry cooling tower be able to a great extent speed up the Planning approvals process. Options are ever-increasing expenditure premiums are falling. Preservation expenses a great deal reduced Legislation is able to protect water provisions to power stations in droughts Also we experience of more than 23 years in the industry of cooling tower manufacturer Dry Cooling Tower Benefits are: Very economical in cost, Conserving significant amount of water, Minimizing environmental impact. How to Design Dry Cooling Tower?   We are designing the dry cooling tower as per the client requirements and we having 23 years experienced in cooling tower industry. We have well designed and develop the timber cooling tower for various industries. Our designing department is updated and very qualified engineers with designing knowledge and designing standards by cooling tower technology (CTI Membership).   If the thermal power plant is not located on the seaside or near a huge lake and if the water is either too exclusive to use a wet cooling tower, then the only cooling preference is using a dry cooling tower. A huge of water gets conserved on using dry cooling towers and Optimized cooling tower designing and develop using latest materials and latest technology construction methods.   In Dry cooling tower, Reduced yearly operating costs and it also No decomposition caused by air and this type of cooling tower performance ensures minimum ecological impact.

Dry Cooling Tower, Cooling Towers, Heatless Air Dryer, Fined Heat Exchanger

• Number Of Flower: Cooling Tower
• Material: FRP
• Availability: 0-100kg
• Automatic Grade: Automatic
• Country of Origin: India

Round type cooling tower are designed to resist severe vibration, wind load and to resist corrosion. The cooling system consists of Honey comb PVC fills.   https://www.welltechcoolingsystems.in/round-cooling-tower/