We are offering wire straightening machine.
The drawn wire loaded on a coil stand,passes through a high speed straightening spinner subsequently cut to standard length within tolerance.
We are offering wire straightening machine.
The drawn wire loaded on a coil stand,passes through a high speed straightening spinner subsequently cut to standard length within tolerance.
Low-cost basic equipment with cut release via release head and a two-meter long, directly attached construction with collecting trough
Stationary Frequency-controlled feed unit, straightening rotor with constant speed of rotation, cutting unit with servo drive
Graphical operator guidance, touchscreen
Fixed stop for short lengths (option)
Extension of directly attached construction, tilting station,
rod-end alignment (option)
Low-cost basic equipment with cut release via release head and a two-meter long, directly attached construction with collecting trough
Stationary Frequency-controlled feed unit, straightening rotor with constant speed of rotation, cutting unit with servo drive
Graphical operator guidance, touchscreen
Fixed stop for short lengths (option)
Extension of directly attached construction, tilting station,
rod-end alignment (option)
The wet wire drawing machine is made of steel fabrication structure that can withstand heavy load at high speed. It consists of 10 dies that completely immersed in the lubricant. The lubricant circulations through heavy duty pump continuously200lits/min.
The shaft bearing is provided with oil seal and made such arrangement to prevent lubricant contamination. The shafts and Bearing area precisely machined on high tech machinery. Accurate & high efficiently power transmission through timing belts that improves machine efficiency.
The wet wire drawing machine is made of steel fabrication structure that can withstand heavy load at high speed. It consists of 10 dies that completely immersed in the lubricant. The lubricant circulations through heavy duty pump continuously200lits/min.
The shaft bearing is provided with oil seal and made such arrangement to prevent lubricant contamination. The shafts and Bearing area precisely machined on high tech machinery. Accurate & high efficiently power transmission through timing belts that improves machine efficiency.
Fabricated using finest grade raw material and is heavily demanded by our global clients.
Discharge of the mixed flux will be by a bottom opening door operated manually.
These are renowned for their durability, sturdy construction, paddle type blades and excellent performance.
Our products are available at industry leading prices.
Fabricated using finest grade raw material and is heavily demanded by our global clients.
Discharge of the mixed flux will be by a bottom opening door operated manually.
These are renowned for their durability, sturdy construction, paddle type blades and excellent performance.
Our products are available at industry leading prices.
We are offering spooler machine.
The final winding of wire is done on the spooler. This machine equipped with travers motion device with separate ac variable drive to wind wire precisely. Its main motor is also equipped with ac variable drive to synchronies the winding pattern. This machine is also equipped with length counter to reach exact wire length and stop the machine. The spool is provided with pneumatic operated tail stock to clamp the spool and it's also reduces the loading -unloading time for operator. Pneumatic cylinder is also provided to hold the wire during reloading operation of spool. The machine is provided with 9+9 vertical and horizontal killing rollers to set the better cast and helix.
We are offering spooler machine.
The final winding of wire is done on the spooler. This machine equipped with travers motion device with separate ac variable drive to wind wire precisely. Its main motor is also equipped with ac variable drive to synchronies the winding pattern. This machine is also equipped with length counter to reach exact wire length and stop the machine. The spool is provided with pneumatic operated tail stock to clamp the spool and it's also reduces the loading -unloading time for operator. Pneumatic cylinder is also provided to hold the wire during reloading operation of spool. The machine is provided with 9+9 vertical and horizontal killing rollers to set the better cast and helix.
Perfect sealing without cracking and coking for adopting nano-fiber cutter holder and anti- sticking thermo-stable nichrome cutter.
Special-designed roller with pin to produce small holes on the film to release air.
Adjustable sliding film support according to the size of packing object.
Low power consumption, only 2.5kw/hour on average.
With thermo-stable and durable plastic cutter clip.
Perfect sealing without cracking and coking for adopting nano-fiber cutter holder and anti- sticking thermo-stable nichrome cutter.
Special-designed roller with pin to produce small holes on the film to release air.
Adjustable sliding film support according to the size of packing object.
Low power consumption, only 2.5kw/hour on average.
With thermo-stable and durable plastic cutter clip.
We offer Pre Block.
The double deck block provided with vertical drum. It is made harden on wire drawing area to provide long life to the drum. It is also provided with internally water cooled arrangement. The Die box having facility to set in three planes that can ensure the perfect alignment and direct die cooling arrangemen
We offer Pre Block.
The double deck block provided with vertical drum. It is made harden on wire drawing area to provide long life to the drum. It is also provided with internally water cooled arrangement. The Die box having facility to set in three planes that can ensure the perfect alignment and direct die cooling arrangemen
Pay off stand consists of vertical coil stand and Compensator.
The coil stand wearing area is metal sprayed to make it hard for wear resistance. The compensator made of Steel frame having one set of fixed pulley and one set of moving pulley.
All the pulley in both set is harden and T C guide provided to guide the wire to the pulley.
Pay off stand consists of vertical coil stand and Compensator.
The coil stand wearing area is metal sprayed to make it hard for wear resistance. The compensator made of Steel frame having one set of fixed pulley and one set of moving pulley.
All the pulley in both set is harden and T C guide provided to guide the wire to the pulley.
The Gear box, hopper and extrusion press are mounted on a table.
The cut wires loaded in the hopper descending down one by one through hopper liners assisted by an agitating mechanism driven by a cam and connecting rod.
The agitating mechanism is powered by a standard motorized reduction gear box The descended wire pushed into a wire feed gear box by a set of rotating hardened and ground pickup rollers through hopper wire guide. The wire feed gear box feeds the wires by a set of hardened and ground rotating feed rollers to the extrusion press through wire guides.
The Gear box, hopper and extrusion press are mounted on a table.
The cut wires loaded in the hopper descending down one by one through hopper liners assisted by an agitating mechanism driven by a cam and connecting rod.
The agitating mechanism is powered by a standard motorized reduction gear box The descended wire pushed into a wire feed gear box by a set of rotating hardened and ground pickup rollers through hopper wire guide. The wire feed gear box feeds the wires by a set of hardened and ground rotating feed rollers to the extrusion press through wire guides.
All Electric and pneumatic, Variable Speed, Independent Control
Tool Close and Position, Complete Touch Panel Operation, One Pass
Removal of Coating, Multi-language graphical user interface (GUI),
Precision tube stop locator
All Electric and pneumatic, Variable Speed, Independent Control
Tool Close and Position, Complete Touch Panel Operation, One Pass
Removal of Coating, Multi-language graphical user interface (GUI),
Precision tube stop locator
Dimensions in mm (External) WxDxH1937x1588x2400 mm 77”x63”x95”
Max temperature (Degrees Celcius)°c300
Connected load (Kw)2.75 (4HP) (415VAC,50HZ)
Weight (Kg)1650
Minimum dimensions to take oven in (HXW)2500×950 mm 100″x38″
Dimensions in mm (External) WxDxH1937x1588x2400 mm 77”x63”x95”
Max temperature (Degrees Celcius)°c300
Connected load (Kw)2.75 (4HP) (415VAC,50HZ)
Weight (Kg)1650
Minimum dimensions to take oven in (HXW)2500×950 mm 100″x38″
Copper coating tank is made of FRP ( FIBRE REINFORCED PLASTIC) to hold the pulley to guide the wire throughout the coppering process of wire.
The SS 316 Structure is operated by pneumatic cylinder. The Pulleys are made of special material which gives acid resistance and also wearing resistance to prevent grooving. The vertical die holder provided for skin pass above the lubrication section on SS 316 structures.
Covers made of SS 316 are provided to prevent damage due to acid and its fumes.
It consists of five sections for:
Pickling
Washing
Coppering
Washing
Lubricant for the last skin-pass die
The high quality Complete SS 316 material gives high resistance to the corroding action of acids with no maintenance cost.
CAPACITY
1. ACID PICKLING SECTION with 2KW heater -1 no 125 Liters.
2. WATER SECTIONm 125 Liters
3. COPPERING SECTION With 2KW heater-2 nos. 500 Liters
4. WATER SECTION 125 Liters
5. LUBRICANT SECTION 125 Liters
Maximum wire speed to be coated 12.5 meters /sec.
Pneumatic tilting device is provided to lift the SS structure.
A vertical die arrangement with Rotating (0.25 hp) is provided for Skin-pass above lubricant section.
Copper coating tank is made of FRP ( FIBRE REINFORCED PLASTIC) to hold the pulley to guide the wire throughout the coppering process of wire.
The SS 316 Structure is operated by pneumatic cylinder. The Pulleys are made of special material which gives acid resistance and also wearing resistance to prevent grooving. The vertical die holder provided for skin pass above the lubrication section on SS 316 structures.
Covers made of SS 316 are provided to prevent damage due to acid and its fumes.
It consists of five sections for:
Pickling
Washing
Coppering
Washing
Lubricant for the last skin-pass die
The high quality Complete SS 316 material gives high resistance to the corroding action of acids with no maintenance cost.
CAPACITY
1. ACID PICKLING SECTION with 2KW heater -1 no 125 Liters.
2. WATER SECTIONm 125 Liters
3. COPPERING SECTION With 2KW heater-2 nos. 500 Liters
4. WATER SECTION 125 Liters
5. LUBRICANT SECTION 125 Liters
Maximum wire speed to be coated 12.5 meters /sec.
Pneumatic tilting device is provided to lift the SS structure.
A vertical die arrangement with Rotating (0.25 hp) is provided for Skin-pass above lubricant section.
Reviews & Ratings
Write a Review
Post Free Ad