Ganga Engineering Works Avarampalayam, Coimbatore, Tamil Nadu

Features closed type impeller fitted with mechanical seal. priming tank is made for aluminium and internal parts are teflon, bronze. increase the life & efficiency of the pump. electric motor driven pumps

Features of Vacuum Pumps Applications of Vacuum Pumps Heavy duty Ball & Taper roller bearings Oil sealed sealing Bed mounted type Used for Dewatering pumps Sewerage, Drainage and Fuel transaction applications

Ganga Open Well Submersible Pumps can be installed inside the water in open wells. It is easy to install and requires no foundation for Vertical and Horizontal Open Well Submersible pumps. No strain in lifting the Monoblock from bed to bed to protect the motor windings, as in case of conventional monoblock pumps. This pumps has only a positive suction head and there will be no priming problems. Ganga Open well submersible pump is made up of graded cast - Iron components and SS 304 outer case. All the components exposed to well water are treated with a special coating to prevent rust formation and to increase the life of the pump. Motor is completely sealed off from the external water source and is capable of working at a wide range of voltage fluctuations. Bushes are water lubricated and a thrust bearing is provided to take axial and radial loads. AISI 304 grade stainless steel sleeves give a long rust free service.

Salient Features [Click to View Image Larger] Range 0.5 HP - 5 HP Discharge from 20 LPM to 400 LPM Head range upto 150 mts.

The highlights of our pumps are compactability, easy installation and less maintenance. Our special features include continuous operation, greater efficiencies, extremely quiet operation and high working pressure. self priming pumps are designed without footvalue. The internal clearances are kept to a minimum and for this reason these pumpsets are intended for use with clean water, free from solides, abrasives and fibrous material to get the best possible efficiency.

Open Well Submersible Pumps can be installed inside the water in open wells. It is easy to install and requires no foundation for Vertical and Horizontal Open Well Submersible pumps. No strain in lifting the Monoblock from bed to bed to protect the motor windings, as in case of conventional monoblock pumps. This pumps has only a positive suction head and there will be no priming problems. Ganga Open well submersible pump is made up of graded cast - Iron components and SS 304 outer case. All the components exposed to well water are treated with a special coating to prevent rust formation and to increase the life of the pump.

Delivery size : 32 mm to 100mm Capacity : upto 110 m3hour Head : upto 400 meters Temperature : upto 120oC Pressure : upto 40 bar Speed : 3000 rpm max Ganga Engineering Works - High Pressure Pump Manufacturers in Coimbatore Features of High Gland packed Mechanical Seal High Efficiency Horizontal, Centrifugal, Multistage, Single Entry Barrel type with closed Impeller Construction with two row self aligning ball bearing on non-drive end, Single row bearing on drive end. Applications Materials High Pressure water supply Sealing water, Boiler feed pump Sprinkler irrigation, Shower Cleaning Graded Cast Iron SS 304 & Gun metal Impeller

Features of High Gland packed Mechanical Seal High Efficiency Horizontal, Centrifugal, Multistage, Single Entry Barrel type with closed Impeller Construction with two row self aligning ball bearing on non-drive end, Single row bearing on drive end.

A Leading Manufacturers of Drianage Pumps, MS Ganga Engineering Works caters to the needs of the customers since 1978. Our company has been set up with latest equipments and customer specific manufacturing facilities with experienced and skilled professionals to manufacture all types of Drainage Pumps. We are fully geared to supply world class products with highest standards of quality assurance. We Solicit Export Enquiries for our various model Drainage Pumps. We undertake domestic supply also.

A Leading Manufacturers of Dewatering Pumps, MS Ganga Engineering Works caters to the needs of the customers since 1978. Founded 30 years ago by Late. Gangaswamy and now it is very well managed by his son Shri. G. Dhanapal. Our company has been set up with latest equipments and customer specific manufacturing facilities with experinced and skilled professionals to manufacture all types of pumps. We are fully geared to supply world class products with highest standards of quality assurance. Ganga Dewatering Pumps are mainly used in Industrial waste water drainage systems, public waste water drainage systems, pumping

This pump is suitable for dewatering, sewerage, drainage and fuel transaction.The suction and discharge is 150 mm x 150 mm with closed type impeller with mechanical seal. (Open type impeller also available).Priming Tank is made of Aluminium and the internal parts are of Teflon, Aluminium and Bronze which increase the life and efficiency of the pump.Discharge Heat & Tee Piece are made by Cast Iron; this reduces the risk of leakage and increase the life. Volute and Discharge Head are made by Cast Iron and it is designed in such a way that the shape of both helps to give a better discharge. Shaft & Impeller are made by 316 Stainless Steel.We are manufacturing pumps as per the demand of the customer requirement like open impeller pumps, Electric motor driven pumps with pneumatic 2 wheels on the road type and also available solid tyre 4 wheel trolley.

A Leading Manufacturers of Dewatering Pumps, MS Ganga Engineering Works caters to the needs of the customers since 1978. Founded 30 years ago by Late. Gangaswamy and now it is very well managed by his son Shri. G. Dhanapal. Our company has been set up with latest equipments and customer specific manufacturing facilities with experinced and skilled professionals to manufacture all types of pumps. We are fully geared to supply world class products with highest standards of quality assurance.

Water lubricated water cooled polywrap copper wire motor Double seal LTB5 or Multirubber bush bearing wide tolerance of voltage High efficiency pump LTB with SS thrust bearing for long life of motor With control panel Dry run and overload protected

We offer Dewatering Pump. Features Water lubricated water cooled polywrap copper wire motor Double seal LTB5 or Multirubber bush bearing wide tolerance of voltage High efficiency pump LTB with SS thrust bearing for long life of motor With control panel Dry run and overload protected

Powerful Motor to withstand wide voltage fluctuations between 180V - 240V & 360V - 415V,Motor Winding fitted with thermal Overload Protector to avoid coil burning due to unrecommended application of the pump.Double Shielded high quality ball bearing lubricated for life to avoid periodic maintanance and ensure long life.Totally Enclosed Fan Cooled (TEFC) type motor design for better protection.Class "B" Insulation designed for continuous duty.

Powerful motor to withstand wide voltage fluctuation between 180 V to 240 V Aluminium Extructed motor body Thermal Overload Protector Specially designed pressure control valve Pressure Indicated by floating pin, no need for pressure gauge Stainless steel shaft Jet assembly comprising of jet body venturi nozzle and foot valve made of bronze Low power consumption and easy in handling

Mitchell type thrust bearing with tilting pad absorbs axial thrust under all adverse conditions ,Easy to maintain with interchangeable parts,High operating efficiency reduces pumping time and power consumption.

a leading manufacturers of dewatering pumps, ms ganga engineering works caters to the needs of the customers since 1978. founded 30 years ago by late. gangaswamy and now it is very well managed by his son shri. g. dhanapal. our company has been set up with latest equipments and customer specific manufacturing facilities with experinced and skilled professionals to manufacture all types of pumps. we are fully geared to supply world class products with highest standards of quality assurance.

A leading manufacturers of dewatering pumps, ms ganga engineering works caters to the needs of the customers since 1978. Founded 30 years ago by late. Gangaswamy and now it is very well managed by his son shri. G. Dhanapal. Our company has been set up with latest equipments and customer specific manufacturing facilities with experinced and skilled professionals to manufacture all types of pumps. We are fully geared to supply world class products with highest standards of quality assurance.

A leading manufacturers of dewatering pumps, ms ganga engineering works caters to the needs of the customers since 1978. Founded 30 years ago by late. Gangaswamy and now it is very well managed by his son shri. G. Dhanapal. Our company has been set up with latest equipments and customer specific manufacturing facilities with experinced and skilled professionals to manufacture all types of pumps. We are fully geared to supply world class products with highest standards of quality assurance.

Features heavy duty ball and taper roller bearings oil sealed sealing bed mounted type, two way suction and pressure operating driven through pulley and belt for particular application on truck.

Applications Handles all Chemical process requirments acids all calies corrosive slurries. Suitable for all liquids with without solids. Used for both Industrial and Domestic Waste water removal.

Features corrosive aluminium tank and cover high strength teflon materials bronze bushes used for increased life and efficiency of the pump.

Features of Chemical Pump Applications of Chemical Pumps Conforming to DIN 24256 Centrifugal Design Closed Impeller Back pull out design Gland packed & mechanical seal Process, Petro Chemicals Paper Mills Sugar Factory Refineries, Fertilizers Handling Corrosive acids