Toroidal Transformers Dealers

(163 products available)
  • Premium
    Toroidal Transformer

    Toroidal Transformer

    Get Price Quote

    • MOQ1 Piece
    • Driven TypeElectric
    • ConditionNew
    • ApplicationAmplifier, Stabilizer, Voltage Convertor
    • Number Of FlowerToroidal Transformers
    • Country of OriginIndia
    • Brand NameMarsz
    • A range of high quality toroidal transformers with twin 115VAC. primary windings and a wide choice of secondary voltages.   The primary windings can be connected in series or parallel to cater for 115V or 230V 50/60Hz AC inputs. All leads for both primary and secondary are double-insulated enamelled wire with stripped wire ends thereby reducing assembly time.   There are no air gaps in the core & no vibrating laminations. The reluctance is low, resulting in very low magnetizing currents with savings in power consumption. A further benefit of this gapless core is the reduced level of radiated electrical noise (hum field).   The simple construction of the toroid and the resultant saving in weight as compared to the conventional laminated transformers makes this range particularly attractive for compact power supplies and slim line equipment. Weight of conventional laminated transformer of 1 KVA is approx.12 kg. whereas weight of TOROPOWER toroidal transformer is approx.7 kg.   Features Dual standard primary windings 115/230V AC Small size and low weight as compared to traditional stacked lamination type transformers. Supplied with mounting kit having a single hole mounting arrangement. 100% electrical and flash tested. High quality manufacturing and testing. Extremely low level of radiated magnetic field. Very low induced noise (hum) Very low iron loss & magnetizing current & good regulation Double insulated leads   Note Twin 115V AC. 50/60Hz primary windings may be connected in series for 230V or in parallel for 115V operation. Twin secondary windings may be connected in series or parallel or can be used independently. Each transformer is supplied with a dished washer, protection pads and nut, bolt and washer for single hole fixing. The pads are to be fitted above and below the transformer winding and the dished washer on top of the upper pad. Under no circumstances should both ends of the fixing bolt contact a metal chassis or frame as this would create ‘a shorted turn’ causing irreparable damage..   Auto Wound Transformers A range of high quality toroidal transformers with one 230V AC. winding and tapping’s provided as per requirement. All leads for both input and output are double-insulated, enameled wire, with stripped & tinned wire ends thereby reducing assembly time.   There are no air gaps in the core & no vibrating laminations. The simple construction of the toroid results in saving of weight as compared to the conventional laminated type transformers.   High conductivity copper winding on insulated toroidal core, made of high grade cold rolled grain oriented silicon steel ensures very low magnetizing currents & results in saving of power consumption, making this range particularly attractive for compact power source and slim line equipment. A further benefit of this gapless core is the reduced level of radiated electrical noise (hum field).   TOROPOWER range of toroidal transformers are available With Voltages as per customer’s specifications up to 600 volts max. Also in sheet steel Enclosed or Resin cast models. With shield Between Primary and Secondary windings if required.   Features 230 V A.C. Input & 115 A.C. Output 50/60 Hz. Popular voltage tapping’s 220-240 V A.C. also feasible. Negligible wave form & power factor distortion. Excellent short time overload capacity. Small size and low weight as compared to traditional stacked lamination type transformers. Extremely low level of radiated magnetic field. Very low induced noise (hum) Very low iron loss & magnetizing current & good regulation Double insulated leads Supplied with mounting kit having a single hole mounting arrangement. 100% electrical and flash tested. High quality manufacturing and testing.   Note Each transformer is supplied with a dished washer, protection pads and nut, bolt and washer for single hole fixing. The pads are to be fitted above and below the transformer winding and the dished washer on top of the upper pad. Under no circumstances should both ends of the fixing bolt contact a metal chassis or frame as this would create ‘a shorted turn’ causing irreparable damage.
    ...more
    www
  • Premium
    Toroidal Power Transformer +1

    Toroidal Power Transformer

    30 - 120 / Piece

    • MOQ200 Piece
    • MaterialCopper
    • ShapeRound
    • Number Of FlowerInductor / Transformer
    • PhaseSingle Phase
    • Country of OriginIndia
    • Input Voltage150 Voltage
    • Current300 mA
    • Frequency60 Hz
    • Power Rating15 KVA
    ...more
    www
  • Toroidal Transformer

    Toroidal Transformer

    Get Price Quote

    Windmill / Solar & Energy Saver ApplicationThese transformers are silent in operation, compact in size, less weight and are ideally suitable 24/7/365 operation due to very low no load losses. Isolated (OW) type• Capacity 50VA to 12 KVA• Three Phase Assembly• High Efficiency Energy Saver Transformers Auto Type• Capacity upto 30 KVA• Three Phase Assembly• Efficiency of 99% is possible in Energy Saver Application     Torroidal Transformers are gaining more and more acceptance due to its unique features and advantages. In fact, because of its low weight & height it is being increasingly preferred over theconventional E&I transformers. In certain applications, its low magnetic stray field & the low mechanical hum are the most advantageous features. The low no load losses of the Torroidal Transformer are of great value in 24 hours stand by equipment. This transformer being custom built proves very economical in large production batches. Dual out-put voltages can be provided if desired. It is also possible to have primary suitable for 115Vor 230V AC, 50Hz.  A Thermal cut off can be incorporated as a special feature at an extra cost. Our manufacturing experience of number of years has given us extensive knowledge & insight in designing the Torrodial Transformer. We use high quality material inputs in order to maintain the quality. The INSULATION between the primary & secondary winding is a fundamental safety feature,and to ensure this we use only,BIS (Bureau of Indian Standards) approved insulating material. Special attention is given to insulation resistance, Hi-pot test & creepage distances.
    ...more
  • Toroidal Transformers, CT S AND Rogowski Coils

    Toroidal Transformers, CT S AND Rogowski Coils

    Get Price Quote

      Rogowski Technology of Current measurement With its over 20 years of experience in Toroidal Technology Salzer- Engineers have pioneered the design, development and manufacturing of Rogowski coils and we have been supplying the Rogowski Coils to various OEM’s worldwide.   A Rogowski coil, named after the German Physisct Walter Rogowski, is an electrical device for measuring alternating current (AC) or high-speed current pulses.    It consists of a evenly wound helical coil of wire with the lead from one end returning through the centre of the coil to the other end, so that both terminals are at the same end of the coil. The winding is done on a non-magnetic/non-metal former of constant cross sectional area. The whole assembly is then wrapped around the straight conductor whose current is to be measured. The speciality is there is no metal (iron) core.   01 Rogowski coils have been used for the detection and measurement of electric currents for decades. The voltage output is proportional to the rate of change of current. This voltage is integrated, thus producing an output proportional to the current. 02 Even though Rogowski Coils are low power sensors, the protection system is immune to external electromagnetic fields. 03 Rogowski Coil can replace CTs for protection, metering, and control purposes. 04 Rogowski Coils are accurate, small, light, and easy to install. They do not saturate. 05 Rogowski Coils provide superior differential protection for power transformers, substation bus bars, generators, and large motors. 06 Rogowski Coils do not create hazards for personnel with open secondary, as Conventional current transformers. Specifications 01 Range : Frame 1- Upto 2000AMPS 02 Range : Frame 2- Upto 4000AMPS 03 Range : Frame 3- Upto 6400AMPS. Frame 3 is provided with Two Rogowski Application 01 Sudden short-circuit testing 02 Monitoring arc furnaces 03 Lightning test facility 04 Monitoring weld quality 05 Protection of slip-ring induction motors 06 Electromagnetic launchers 06 On-line insulation discharge monitoring 07 transient measurements.
    ...more
  • Toroidal Transformers

    Toroidal Transformers

    Get Price Quote

    • ApplicationAmplifier, Stabilizer, Voltage Converter
    • Country of Origin0-110 V, 110-220 V, 220-440 V
    • ConditionNew, Used
    • Total Carbohydrate1 yrs, 2 yrs
    • Packaging TypesBox, Plastic Bag
    • We are the main supplier of this product.
  • Toroidal Transformer 6000watt

    Toroidal Transformer 6000watt

    Get Price Quote

    • FeatureGood Quality
  • Toroidal Coil Transformers

    Toroidal Coil Transformers

    Get Price Quote

    • Country of OriginMade in India
    • Minimum Order Quantity50 Roll of 50 metre
    • Power SourceAC
    • Toroidal transformers are power transformers with a toroidal core on which the primary and secondary coils are wound. When a current flows through the primary, it induces an electromotive force (EMF) and then a current in the secondary winding, thereby transferring power from the primary coil to the secondary coil
    ...more
  • Toroidal Type Transformer +1

    Toroidal Type Transformer

    1,000 - 15,000 / piece

    • MOQ1 piece
    • Brand NameShilchar
    • Number Of FlowerToroidal
    • Total Carbohydrate1year
    • Country of OriginIndia
    • MaterialOEM
    ...more
  • Toroidal Transformer for Power Amplifier

    Toroidal Transformer for Power Amplifier

    Get Price Quote

    • Country of OriginIndia
    • Number Of FlowerToroidal Transformers
    • ApplicationAmplifier, Stabilizer, Voltage Convertor
    • FeatureEnergy Efficient, Exsy Mounting, Low Stray Magnetic Fields
    • Country of Origin110V, 220V, 230V
    • ConditionNew
    • Power1-5kw, 5-10kw
    • Driven TypeElectric
    • PhaseDouble Phase, Single Phase, Tripple Phase
    • Total Carbohydrate2years
    ...more
  • Toroidal Transformer

    Toroidal Transformer

    Get Price Quote

    For the convenience of the clients, we have adopted safe and secure payment gateway that helps us in the attainment of complete client satisfaction and maintaining transparency in dealings. Experts' assistance is what makes our packaging reliable and highly durable as well. The packaging material used is certified and experts approved to ensure complete safety. Specification : Low Loss Toroidal Transfer. With German Tech. Made in wide input range. Eligent Economic Sleek tested to IS 8448 : 1994 Minimum electricity consumption on No load condition. Suitable for A.C. Fridge, Deep Fridger & Electronic equipment. Made with high Grade core and insulating Material. Available in Alluminium and copper winding both.
    ...more
  • Toroidal Power Transformers

    Toroidal Power Transformers

    Get Price Quote

    A toroidal transformer has ring type core made from cold rolled grain oriented ( CRGO ) Silicon steel strip without any joints and annealed for stress relief after being wound. These wound cores are then suitably insulated by class B insulation and the winding of copper wire is usually done by winding machines.The core being continuous, without any air gap and the path of flux being along the direction of grain orientation, gives an opportunity for optimum use of flux density, besides very low iron loss and exciting current. The primary and secondary windings are closely linked magnetically. Therefore the leakage fluxes and reactance are negligible. A toroidal transformer has its winding spread over the entire periphery of the core. This results in largcr area for dissipating the heat. Till recently all such small low voltage type transformers needs were met almost universally by traditional or conventional El transformers. Now materials are easily available, so it has been possible to develop 'LOW VOLTAGE TOROIDAL TRANSFORMER' giving a whole set of advantages and wide range of applications in place of conventional transformers.
    ...more
  • Toroidal Transformer

    Toroidal Transformer

    850 / onwards

    • Power2 HP
    • PhaseSingle Phase
    • ApplicationIndustrial
    • Brand NameAtlas
    • Input Voltage220 V
    • Current5 A
    • Cooling TypeDry Type/Air Cooled
    • Frequency50-60 Hz
    ...more
  • Toroidal Transformer

    Toroidal Transformer

    Get Price Quote

    • ApplicationAmplifier, Voltage convertor, Stabilizer
    • PhaseSingle Phase
    • FeatureExsy mounting, Low stray magnetic fields, Dimensionally flexible
    • Total Carbohydrate1 Year
    • Ranging15 VA - 4 KVA
    • Weight3 Kg
    • Cooling TypeAir Cooled
    • Use inCar Charger
    • We are reckoned among the reliable Manufacturers, Exporters and Suppliers of Toroidal Transformer. The transformers are manufactured in compliance with international quality standards. We have all the in-house facilities to deliver bulk orders of the transformers within the promised timeframe. One can obtain these at reasonable rates from us.   Details : A toroidal transformer has ring type core made from cold rolled grain oriented ( CRGO ) Silicon steel strip without any joints and annealed for stress relief after being wound. These wound cores are then suitably insulated by insulation and the winding of conductor is usually done by winding machines. The core being continuous, without any air gap and the path of flux being along the direction of grain orientation, gives an opportunity for optimum use of flux density, besides very low iron loss and exciting current. The primary and secondary windings are closely linked magnetically. Therefore the leakage fluxes and reactance are negligible. A toroidal transformer has its winding spread over the entire periphery of the core. This results in large area for dissipating the heat. Till recently all such small low voltage type transformers needs were met almost universally by traditional or conventional El transformers. Now materials are easily available, so it has been possible to develop 'LOW VOLTAGE TOROIDAL TRANSFORMER' giving a whole set of advantages and wide range of applications in place of conventional transformers.   Advantages Over Conventional Transformer : Smaller Size and Weight : When used with a centering washer and screw / bolt, it becomes 40 % lighter and smaller. No Inherent Hum / Vibration and Low Noise : In toroid there is no air gaps and loose sheets of steel or lamination to cause vibration. Further copper winding are done on the above core so it almost completely eliminates the hum and noise. Negligible ' No Load Loss ' and Excitation : In applications where a circuit is in a "stand - by mode" for a long period, the potential Cost reduction for power can be significant. Approximately 85 % at no load and 35 % under load condition. Higher Efficiency : All windings are symmetrically spread over the entire round gapless core, which gives an opportunity for higher use of flux density and reduced winding resistance, thus it achieves a very high electrical efficiency. Reduced Temperature Rise : Winding spread over the entire periphery of the core. This result in a larger area for dissipating the heat. Low Stray Field : Approximately 85-90 % lower than conventional transformers.Since toroids have no air gaps, primaries and secondaries are wound uniformly around the entire core resulting in toroid emitting very low radiated magnetic field. Ease of Mounting : Easy mounting by centering washer or Resin center potting with through hole and screw /bolt, or using bracket or combination of bracket and studs. Applications : Medical equipment, Audio / Video products , Motor control equipment, Lighting , Stabilized power supplies , Microprocessor based units , Battery chargers, Telecommunication products , Instrumentation , Computer and peripherals , CNC controlled machines , CRT, Robot equipment, Industrial Control Equipments, Office machines etc. By considering above advantages, TOROIDAL TRANSFORMER is the one to be used in place of the old conventional type transformer.
    ...more
  • Toroidal Transformer

    Toroidal Transformer

    Get Price Quote

    Avail from us an impeccable range of Toroidal Transformers that finds applications in various industrial areas. Our array of Toroidal Transformers is manufactured using automatic special purpose toroidal-winding machines. These transformers are highly in demand in the market, owing to their high quality and optimum efficiency. Besides, our range of Toroidal Transformers can be availed in varied dimensions and sizes at the most reasonable price. Preferred for : Quieter operationCorrosion resistanceLow stray magnetic fieldsLight weightDimensional accuracyNo air gapsCompact design Benefits : Reduction of assembly timeSavings in copper Applications : Medical InstrumentsPower SuppliesAudio/Video EquipmentSecurity Systems
    ...more
  • Toroidal Transformer

    Toroidal Transformer

    Get Price Quote

    • ApplicationStabilizer, Amplifier, Voltage Convertor
    • ConditionNew, Used
    • Driven TypeElectrical
    • FeatureCompact, Energy Efficient
    • Packaging TypeBox, Carton
    ...more
  • Toroidal Core Transformer

    Toroidal Core Transformer

    Get Price Quote

    We are considered as one of the leading Manufacturers, Suppliers, and Exporters of Toroidal Core Transformer. Our Toroidal Transformer Core is fabricated under the guidance of experts to ensure its premium quality and dimensional accuracy. We conduct a special process with high degree of precision to manufacture Toroidal Transformer Core to meet the diverse needs of Reactors, Chokes and so on. Manufacturing process The manufacturing of strips wound cores is a specialized process, which requires a high degree of precision. These cores are manufactured from selected coils of crgo electrical steel to yield closely controlled electro-magnetic characteristics and dimensional accuracy. Cores are wound after slitting is done as per the required shape, on the core winding machine. The winding machine automatically stops when the pre-decided dimension is reached. The start and finish ends are firmly spot welded. After winding, the cores are stress-relief annealed to restore the magnetic properties. The cores are bonded where necessary, to provide increased firmness. All cores are spray painted or varnished (as required by customers) and are tested for magnetic properties. Testing Strip wound cores, unlike strip lamination, constitute a complete product and every core must meet the specified performance requirement. Consequently, quality control in the manufacturing of wound cores is vitally important at every stage of process. Dimensional tolerances The coils of crgo steel from which the cores are manufactured are carefully selected on the basis of tests carried in our laboratories to ensure that the correct grade of steel is used. Strict checks are made at every stage from winding to the final stage of spray painting & varnishing to ensure that the finished product is of a high quality. Moreover, each core is subject to inspection and electrical tests at BSP to make certain that our customers are provided with the specified performance requirement. Apart from being fully equipped to meet the exacting standards of testing required, BSP possesses the technical knowhow, the research facilities and the necessary raw-materials. Inside Diameter (d)Outside Diameter (d)Height (h)OverUptoTol.OverUptoTol.OverUptoTol.30100+ 1.230100+ 1.50150+ 1.0-0100150+ 1.5100200+ 2.0150200+1.2-0150200+ 2.0200400+ 3.0200500+2.0-0200400+ 3.0400800+ 4.0500+3.0-0400700+ 4.0------ Characteristic It is toroidal and wounded in the same direction of closed flux path, no magnetic leakage, so its magnetic performance is best of all. The coil winding is easy and high efficiency with toroidal winding machine. Application Used in 50 Hz and 400 Hz transformers Current transformers Reactors Chokes Magnetic components of electronic equipments
    ...more
  • Toroidal Transformer

    Toroidal Transformer

    Get Price Quote

    • TypeToroidal
    • SizeSmall-sized
    • WeightLight-weight
    • Noise LevelLess Noisy
    • Miracle Electronics best Toroidal transformers in India are small-sized, light-weight, less noisy, highly efficient and provide excellent regulation with minimal temperature rise because they possess a lower exterior magnetic field. The ideal choice for your utility.
    ...more
  • Toroidal Transformer

    Toroidal Transformer

    500 - 2,000 / Piece

    • Power3000VA
    • PhaseSingle Phase
    • Input Voltage750 V AC
    • Frequency50/60Hz
  • Toroidal Transformer

    Toroidal Transformer

    Get Price Quote

    • Driven TypeElectric
    • ColorGrey
    • ConditionNew
    • ApplicationIndustrial
    • We offer a new grey toroidal transformer designed for industrial applications. Our electric-driven transformer is ideal for manufacturers seeking reliable power solutions. With a compact design and high efficiency, this transformer is a must-have for industrial businesses looking to optimize their operations. Trust in our quality products to meet your power needs with ease and precision.
    ...more
  • Toroidal Transformers

    Toroidal Transformers

    Get Price Quote

    Product DescriptionThe cores of Toroidal Transformers are constructed by tightly winding one long continuous silicon steel tape into a spiral. This core does not require lamination steel punching, since it is one continuous length of material. Flux leakage is kept to the minimum. The tape-wound core is one of the most efficient of core- designs available.E-I Transformers are being replaced by Toroidal or ring type transformers manufactured on CNC machine.Salient FeaturesToroidal Transformers have the following advantages over the E-I type:1. Low weight2. Small dimension3. Low hum and noise4. Easy one bolt mounting arrangementTechnical Specificationsa) Custom-designed toroidal transformer.ApplicationsElectronics/ Electrical Industries.Power condition equipments , UPS, Inverters, Control panel, Power supplyMedical equipmentIndustrial /Ship lightingAudio systemsAC adaptorsAny other special applicatio
    ...more
  • Toroidal Transformer

    Toroidal Transformer

    Get Price Quote

    we are one of the leading manufacturer, supplier and exporter of wide range of ToroidalTransformer in Ahmedabad, Gujarat, India. The offered product is manufactured by our expert professional utilizing high grade copper, other magnetic materials and advanced techniques. These Taroidal Transformer used in large majority in the application where the lower power is required. Used in anapplication in industrial electronics as amplifier, charger, rectifier and other devices. This Transformer can be square, rectangle or circular shape. Available in various sizes, shape according specification given by our clients. Moreover, these Transformers can be available at a very nominal rate. Key Features Small in size Compact design High electrical efficiency Effectively deployed heating Low noise Low maintenance cost Application of AC Synchronous Motor Telecommunication system Automotive electronics Industrial Electronic Power Distribution equipment Audio system
    ...more
  • 5KVA 90-300V Toroidal Transformer

    5KVA 90-300V Toroidal Transformer

    2,350 / Piece

    • MOQ5 Piece
    • Country of OriginIndia
    • FeatureEnergy Efficient, Low Stray Magnetic Fields
    • ConditionNew
    • Driven TypeElectric
    • Capacity1-2-3-4-5-6-7-10 kva
    ...more
  • Toroidal Transformer

    Toroidal Transformer

    250 / Piece

    • PhaseSingle Phase
    • CapacityUpto 10 KVA
    • Cooling TypeAir Cooled
    • Current Rating1 to 200 Amp Ac
    • Operating Frequency50Hz- 60 Hz
    • Coil MaterialCopper
    ...more
  • Toroidal Transformer

    Toroidal Transformer

    Get Price Quote

    We are one of the most preeminent manufacturers and suppliers of tiroidal transformers in India. We offer highly advanced toroidal transformer,, which is widely used in controllers and AC, DC drives. This transformer which has round shape with no air gaps and it has primary and secondary windings uniformly distributed around the core. It locks in the magnetic field and makes the toroidal transformer very quiet and efficient. Popular For : Reduced costProvides quiet, efficient operationLow stray magnetic fieldsSmall sizeLow weightGood voltage operationEasy to operateShock proof Applications : Civil Industry ProductsMedical EquipmentCNC MachinesCommunication EquipmentComputerUPSVarious Electronic Equipment Usage : In AC/ DC drives
    ...more
  • Toroidal Transformer

    Toroidal Transformer

    Get Price Quote

    • Country of Origin220 V
    • Power1-5 kW
    • PhaseSingle Phase
    • ShapeRound
    • Usage/ApplicationIndustrial
    • MaterialCopper
    • Cooling TypeDry Type/Air Cooled
    • Current25 A
    • Frequency50 Hz
    ...more
  • Oem Toroidal Power Transformers

    Oem Toroidal Power Transformers

    Get Price Quote

    • Country of Origin0-110 V, 110-220 V, 220-440 V
    • ConditionNew, Used
    • Packaging TypeBox, Carton
    • MaterialCooper, Mild Steel
    • Driven TypesElectrical
    ...more
  • Toroidal Transformers

    Toroidal Transformers

    Get Price Quote

    Lack of interfering hum eliminates the need for magnetic shielding , which is required by conventional transformers, and also enables the toroid to be fitted into electronic circuitry without causing electrical interference. The height of a Toroidal Transformer is considerably lower than the ‘E’ & ‘I’ core transformer. Which means that it’s ideal for ‘Slimline’ electronics. Moreover, the variable core geometry ensures that a Toroidal Transformer can be designed to fit in a specific space – a tremendous advantage where space is a constraint.
    ...more
  • Toroidal Transformers

    Toroidal Transformers

    Get Price Quote

    • Country of Origin220-440 V
    • ConditionNew, Used
    • Driven TypeElectrical
    • MaterialMild Steel, Copper
    • Packaging TypeBox, Plastic Bag
    • FeaturesSuperior quality, Durable
    • Please let me your specifications, after that we quote you.  Thanks  RAJEEV BANSAL  9811034910 
  • Toroidal Transformer

    Toroidal Transformer

    Get Price Quote

    • Torodial Transformer rating1VA upto 5kVA
    • FeaturesSmaller dimensions, light weight, and low stray magnetic fields, make very low noise Operation.
  • Toroidal Transformers +2

    Toroidal Transformers

    500 - 1,000 / Piece

    • MOQ100 Piece
    • Country of OriginIndia
    • Number Of FlowerToroidal Transformers
    • CertificationCE Certified, ISO 9001:2008
    • ApplicationAmplifier, Stabilizer, Voltage Convertor
    • FeatureCompact, Energy Efficient
    • Country of Origin110V, 220V, 230V, 380V
    • ConditionNew
    • Power1-5kw, 10-15kw, 15-20kw, 20-25kw, 5-10kw
    • Driven TypeElectric
    • PhaseDouble Phase, Single Phase, Tripple Phase
    • Total Carbohydrate1year
    • Toroidal Transformer offer many advantages over a conventional laminated transformer.Toroidal has a round shape with no air gaps,and with the primary and secondary windings uniformly ditributed around the core,"locks in" the magnetic field and makes the toroidal transformer very quiet and efficient. Toroidal Transformer,by meeting today"s requirements for smaller,more efficient,quieter and safer products,are being accepted in an increasing range of electronic and electrical equipment.With toroidal transformer smaller dimensions, lighter weight and low stray magnetic fields, you can build more compact,lower cost quality products without sacrificing performance.
    ...more
Filter by City
top