Rubber Plug Dealers

The Rubber Plugs are being used to hold the pressure of compressors (Refrigerator & air-condition). These are inserted into the copper tubes so that the pressure can be maintained. The Rubber Plugs cum Paint cap are used to hold the pressure of compressors and in the same time the outer layer of cap prevents the copper tube free from any paint during the paint process.

The NOLTA rubber plug is equipped with an over-current release up to 16 A at a rated voltage of 250 V. This type is also available as connector plug, with an integrated on/off switch. * NOLTA Connector plug For devices, where on /off switch must be accommodated outside of the equipment, the NOLTA rubber plug can be used as a connector plug without motor protection.

Rubber caps and rubber plugs are available for a wide range, but are most often selected for applications requiring resistance to heat and chemicals.

We deal in Cementing Rubber Plugs are offering cementing rubber plug designed with plastic core and aluminum core. This helps to compliment its line of plugs to decrease drill out times. The Cementing Rubber Plug is used for separating the cement slurry from the mud. Our range of Cementing Rubber Plugs have solid top plug and the bottom plug is hollow. They can all be drilled out with PDC bits. The material of the Cementing Rubber Plug body is Acrylonitrile- Butadiene rubber. It is heat-resisting and tough and the core is made of a glass-filled high strength Phenol resin core. Attributes : The tapered base fits the cavity of the bottom plug for a positive seal. The fins and tail section provide positive wiping action. Fins also serve as a seal while cementing A rubber diaphragm at the top of the plug ruptures after the plug is seated allowing cement to flow through. The cementing rubber plugs are available in sizes 4 12" to 20". It prevents the mud from blending into the cement slurry to influence the cementing quality.

Pneumatic pipe plugs are flow stoppers for temporary close off a range of pipe diameters. The multi sized flow stoppers can close off a range of pipe diameters. Pneumatic Pipe Plugs are very suitable for use in sewage or drain systems for sewer inspections, sewer cleaning, drain repair activities. And the Pneumatic test plugs are used for pressure testing the drain system according to Euro Norm NEN- EN. These pneumatic plugs are built up with high quality of aramid (Kevlar) reinforced on layers of neoprene rubber. They are easy to install, and as even more important easy and quick removed because of the relative small diameter and light weight,Pneumatic Pipe Plug with Flexible Bypass (Flex ODS): The Flex-ODS, is a pneumatic pipe plug with a flexible bypass hose trough the stopper and with a diameter of 1, 2 and 4 depending on the size plug. These plugs are suited to create a diversion or bypass, when working in the pipeline. These are also perfectly suitable for testing with air or water of a pipeline according to Euro Norm NEN-EN- 1610: Construction and Testing of drains and sewers,Pneumatic Pipe Plug With Bypass Mounted on Pipe (ODS): The ODS pneumatic pipe plug has one or more bypass possibilities depending on size of the pneumatic pipe plug. They consist of a steel core supplied with a reinforced inflatable rubber sleeve. Being inflated the sleeve clamps around the steel core and it sets, fixates itself to the wall of the pipe. The strong sleeve and steel core make higher operating pressures possible and therefore excellent for rough work conditions. The steel core can be used to stamp or strut. The ODS pneumatic pipe plug is suited for testing with water, air according to Euro Norm NEN-EN-1610.

The rubber dropper assembly is used for dispensing liquid medicine in a measured manner to the individual. The different components are assembled together to make a dropper assembly - rubber bung, plastic screw cap, glassplastic pipette. We offer the finest grade rubber, glass, plastic for the assembly of the dropper unit manufactured in a clean room environment for protection from any dust or contamination.

The cap can be used to mask threaded and non-threaded studs or threaded and non-threaded holes. Silicone Rubber is flexible and suitable to any irregular shapes. Recommended for use in Powder Coating, Liquid Coating, E-Coating, Anodizing and Plating. We also make Masking Plugs in Natural Rubber for Sand Blasting & Grid Blasting.  

We provide Anti Vibration Rubber Pads for which uniform loading of the pad has to be ensured at the time of installation. These pads are suitable to support the machines while functioning. The Anti Vibration Rubber Pads provided by us are known for possessing features like ability of greater sound insulation, easy installation, etc. These can be customized as per the specifications of our clients and are offered at industry leading prices. We offer rubber pads, which find their application in diverse industries like:     Compressors Computers Customization of products. Generators Pumps Air Handling Units  

Wide range of Rubber Plugs and Caps are manufactured for refrigerator, compressor based on customer's specifications. Masking caps for paint shops are also manufactured.

We offer these types of rubber plugs are used for sealing purposes of the tanks, containers containing chemicals having temperatures, for sealing in dipping process, sealing of paint entrapment etc.

We are well-established organization successfully operating from West Bengal(India); we are a reliable name in the sphere. Timely delivery is our forte as we have up-to-date transit facilities and logistic services. We are dealing in all kinds of rubber plugs, stoppers and spider couplings with EPDM/Natural Rubber/Synthesized Rubber

We make available Rubber Masking Plugs in varying sizes. We keep the finished assortment of products in the highly developed and capacious storage unit. This helps us in keeping the products safe and sorted till the final dispatch. With complete security system and with the help of the leading technologies, we make it possible to make payments online. Fret not! We ensure that all the details are kept confidential and are not shared with the third party.