ISO Certification Services

Assisted by our affluent industry indulgent and proficiency in this arena, we are able to provide IATF 16949 Certification Services. Provided services are imparted by adroit personnel who hold vast knowledge in their respective realm that assists them in imparting these services in a well-organized way.   

Pre & Post ISO Certification Services provide end-to-end support for organizations seeking ISO compliance. Pre-certification services include gap analysis, documentation assistance, employee training, and implementation support to ensure readiness for certification audits. Post-certification services focus on maintaining compliance through surveillance audit preparation, system updates, corrective actions, and continuous improvement.

ISO 10002 provides guidance for the design and implementation of an effective and efficient complaints-handling process for all types of commercial or non-commercial activities, including those related to electronic commerce. It is intended to benefit an organisation and its customers, complainants and other interested parties. To ensure integrity in the ensuing certification, ISO 10002 certification through Equal Assurance must be attained in concert with other management systems certifications, as prescribed in the Client Charter.   The process As an organisation, the steps involved for you are:   Applying for certification: Review and accept our customised Proposal, and you’re underway! Achieving certification: Firstly, a pre-certification audit or “test run” will be conducted either on-site (at your premises) or off-site (at our premises) or both, to see whether your management systems are suitable. Areas of concern will be reported. Once concerns have been actioned, an on-site certification audit will be conducted, where we will examine the extent to which you address the program criteria. Areas of concern will be reported. Once we are satisfied there are no outstanding issues that present an unacceptable risk to you, your employees, customers, regulators, Equal Assurance or others, we can proceed to issue a Certificate of Confidence. Well done! Maintaining certification: Depending on the level of risk, we will conduct a series of surveillance audits (and in some cases special and follow-up audits) and tri-ennial re-certification audits, to examine the extent to which you continue to address the program criteria. Areas of concern will be reported. So long as we continue to be satisfied there are no outstanding issues that present an unacceptable risk to you, your employees, customers, regulators, Equal Assurance or others, your certification remains valid.

E- Filling Infotech Private Limited is a known name, specialized in providing ISO certification services from Kolkata (West Bengal, India). With our services, we assist clients to prepare for the implementation of the ISO standards, filling & filing application, audits, and completing other related formalities in a careful manner. We majorly cater to ISO certifications requirements of clients across IT and Consulting, Manufacturing, Banking, and Finance sectors. To schedule an appointment with one of our consultants, ring us on the given numbers.

ISO 45001 is an ISO standard for the management system for (OH&S) Occupational Health and Safety was published in 2018. Are you looking for ISO 45001: 2018 Certification Services? We at Mark Certification services provide our clients with the best certification services at a low rate. ISO 45001 is for the management system of OH&S or occupational health and safety. This certification aims to reduce occupational diseases and injuries. It enables organisations to provide healthy and safe workplaces. This certification applies to the people or organisations to want to improve occupational safety and health, by eliminating or minimizing the risks. Therefore to get this certificate contact us. We have a team of experts to clear all your doubts and fulfil all your requirements.

Ours is a Thane (Maharashtra, India) based industry that is involved in offering ISO Certification Consultancy Services. We have a team of professional and experienced consultants that provide apt advice on any issue related to ISO certifications. Getting an ISO certification is important as it increases the Effectiveness of managing business processes and the credibility of an organization. Thus, we help in guiding you on how to follow guidelines of QMS, EMS, OHSMS & EnMS standards. We ensure complete satisfaction to the clients. Also, our services are nominally charged. We also get your organization certified to any of the above standards as per your preference on the certification body. We also audit organizations and give awards as best QMS/EMS/OHSMS/EnMS practicing organizations. For details contact. Our Speciality is Internal Auditor training

We are providing fast, effective & economical iso certification. We are one of the leading iso consulting organizations. We render unbeatable iso certification consultancy for iso 9001 qms, iso 14001 ems, ohsas 18001, iso 13485,ce marking, isms 27001, iso 13485, ce marking, iso 50001, ts 16949, iso 28000, fssc 22000, organic certification, c-tpat, itsm 20000, iso 27001,haccp, iso 22000, brc & other food certification and sa-8000, sedex, bsci consulting services, etc.

Among the broad array of services, there exists Service of ISO Consultancy. We provide ISO Certification Services to add value to organizations by offering advice on appropriate areas of operation. The ISO 9001: 2000 consultancy Services Provided by us are available at reasonable rates. We invite you to come and become a part of our family and avail these excellent services.\n Estimated Time Frame Development Phase Time Schedule\n\nPhase I (8-10 Weeks)\nPhase II (4-6 Weeks)\nPhase III (8-10 Weeks)\nPhase IV Depends on the Certification Body (Generally 3-4 Weeks)\n\n (N.B.The fees shall be quoted, after the receipt of details indicted in Client Information Proforma). The Consultant would also ensure that AUDIT is completed satisfactorily well and document is accepted in Pre/Post AUDIT The Quality Manual and Processes are made in line with the International Standard. The other parameters are as per Modules indicated and we shall adhere to the time schedule. The development of a quality management system of your organization would involve the following phases: Phase I Exposure on ISO 9000 and Development of Quality System Procedures and Associated Documents\n\n\nAwareness programme on ISO 9000-2000 series of standards\nReview of Organization\'s Quality Policy\n--Review of Business Goals and identification of Objectives\n\n \n\n--Establishment of measurable objectives relating to Key Process areas\n\n \n\n--Review of the existing system in operation\n\n \n\nOutline of quality management system documentation\nDevelopment of a numbering system for documentation of the quality management system\nIdentification of quality management system procedures required\nDevelopment and writing of quality system procedures\nDesigning of work instructions\nIdentification and development of forms/formats\nIdentification of quality system records\n\n On completion of this phase the managers and supervisory personnel will have sufficient knowledge to appreciate how their particular operations fit into the requirements of ISO 9001 and the quality system procedures and associated documentation will be ready for implementation Phase II Development of Quality Manual\n\nWriting of the Quality Manual\nFinalization of the Company\'s Quality Policy\n\n On completion of this phase the Quality Manual will be ready. Phase III Installation and Evaluation of the Documented System\n\nTraining of internal quality auditors\nConducting a trial audit of the system\n\n It may be noted that staff training schedule will be conducted here itself as per detailed discussion with the management. On completion of this phase the system will be ready for application to the certification agency. Phase IV Certification Audit\n\nFinal audit by third party certification body\nAssisting in resolution of non conformities raised by authors of certification body\nCharting the follow up action on the report of certification body\n\n Main Advantages of ISO Certifications Symptoms of Poor Quality\n\nComplaints : you spend a lot of time dealing with (or avoiding) irate customers.\nTime : you never have enough time for the necessary and important work.\nHassle : There are always fires to put out.\nOverload : you always have too much to do.\nUnder-Load : Others dump their work to you.\nConfusion : No one seems to know what is going on.\nNeglect : No one wants to hear your views or problems.\n\n On completion of this phase your organization becomes certified to ISO-2000. What is Quality\n\nQuality is meeting customer requirements\nQuality is a concept that everyone agrees is important, but no one acts to achieve it in any tangible way\n\n Before Implementation of QMS\n\nAll businesses have an established way or system of doing businesses, likelihood is that system is quite effective, but informal and probably not documented.\nMeasurement of Quality in each process and overall for organization do not exists\nProblems as they are faced are handled no conscious efforts are made to prevent the recurrence\nUseful data wrt achievements and problems faced is not collected\nKnowledge is not preserved\nResponsibilities and authorities are unclear there are misunderstandings at times\nEmployees are not trained to be quality conscious, there are rejections / customer complaints due to poorly defined processes and negligence\nWhenever people change, training new person takes time\n\n After ISO 9001 Implementation Internal Improvements\n\nConfidence to management that the intended quality is being achieved and maintained\nClarity, uniformity in the working\nProcesses are controlled, such that non-conformances are prevented (not detected)\nPlanned continuous quality improvement efforts\nReduce production costs because money is no longer spent on waste and rework. The savings can be reinvested in new technology and in reducing the cost to the customer\n\n Recognition\n\nSome customers in are looking for the confidence that can be given by a business having a quality system\nIt establishes company\'s credibility among customers\n\n What is Process Improvement? Business is about people working with other people. customers, managers, staff, and suppliers. A quality process makes us look again at the way all these people work together with the challenge that it can and must be done better than before.\n\nCan we create more value and less waste in those processes\nCan they be made faster, more robust, practical, and more flexible?\n\n Symptoms of Good Quality\n\nHigh customer satisfaction\nRepeat orders  reduced marketing costs\nFirst time right every time, - No reworks or wastages.\nIncreased sales and profits.\nLow attrition rate of employees. Good employees stay.\n\n Client Information Proforma Just complete the following profile Form and well send you our Proposal for consultancy training :\n\nName of Company\nOffice Address\nWorks Address(S)\nContact Person Name & Designation\nProduct Manufactured\nNo. of Employees\nTurnover\nDetails of any other Quality System already existing\nTarget date to achieve certification\nAny other relevant information\n

ISO certification services validate an organization's commitment to quality, efficiency, and customer satisfaction. Achieving ISO certification signifies adherence to international standards, enhancing credibility and market competitiveness. These certifications cover various aspects, such as quality management, environmental practices, and information security. Organizations undergo rigorous assessments to meet ISO requirements, ensuring robust systems and processes. ISO certification is a globally recognized hallmark, attracting customers and stakeholders, and demonstrating a dedication to excellence in products or services.

Listed amid the celebrated names in the industry, we are providing ISO certification consultancy services to the businesses in the city. Ours is a group of skilled professionals, who work together & with clients and provide solutions as per their needs. With this, we help them in completing the paperwork and other legal procedures. We are operating from Nanded (Maharashtra, India); clients can get in touch with anytime, through our website. Our service charges are also reasonable.

ISO 9001:2015 IAF Certification Service helps businesses obtain a globally recognized Quality Management System (QMS) certification accredited by the International Accreditation Forum (IAF). This certification demonstrates a company’s commitment to consistent quality, customer satisfaction, and continual improvement. Our service includes expert consultation, gap analysis, documentation support, implementation guidance, and audit preparation to ensure full compliance with ISO standards. IAF-accredited certification enhances brand credibility, supports international trade, and meets client and regulatory requirements. Whether for tender eligibility or global expansion, we simplify the certification process and deliver reliable support to help your organization achieve ISO 9001:2015 IAF certification efficiently and confidently.