Wire Nail Making Machine Dealers

We are well reckoned as one of the prominent Nail Making Machine Manufacturers based in India. CONSTRUCTION : The main frame of Wire Nail Making Machine is of high grade and all leavers and their components subject to heavy duty are all manufactured from high quality steel and designed with high safely factor. MAIN DRIVE : Operating mechanism of Automatic Nail Making Machine is to longer mount on one common shaft but on two auxiliary shifts thus eliminating long cutter leavers. The cutter slides move in substantial guides and driven directly by cracks acentric. This avoids all detrimental impacts of the cutter against each other consequently reduces cutter wear. CRANK SHAFT : The crankshaft is carried in four bearings, the smooth ruining of the nail machine is thus ensured. FEEDING MECHANISM : Operated by crank drive, which reduces feeding speed. A screw controls the length of intake. The intake cutter is raised mechanically during backstroke so that its wear is considerably reduced. EJECTOR : One ejector fitted with the punch ensures that the nails are ejected at the right moment, avoiding any bending of nails. PRESSURE : The necessary pressure on grip of the dies is obtained shaft the roller. There are seven models of wire nail making machines to cut different length of nail with different gauge of wire.

Today Shabnam Industries stand one of the best Quality Manufacturer & Exporter of Automatic Wire Nail Making Machine. With the changing time, new technologies are introduced to make the products for better performance. With close observations, studies and constant research conducted over the past many decades, Wire Nail Making Machines are designed Heavy Duty and finally processed for very swift performance and large output. Crank type, Panel Pin and Wire Nail Making Machines are designed heavy duty, which are made from superb casting of High grade steel which have longer life to perform with least maintenance cost. Since all moving parts are well protected, its operation thus is very safe for the operator. Widely accepted and most successful 3 shafts has been adopted, which ensures most swift, efficient and smooth working of the Wire Nail Making Machine. The main crank is directly operated by Electric motor and the side shafts are driven by the four bevel gears which operate the cutting tools

WIRE NAILS MAKING MACHNEWe have following Models of Automatic Wire Nails Making Machine Model - APN-1 Size of Nail APN-1 Can Make :- 3/8" to 1.25"Size of Wire :- 17 S.W.GNo. of Nails it mfrs in 1 Minute :- 450 to 500 pcsElectric Motor :- 1 H.P. 1400 R.P.MModel - APN-2Size of Nail APN-2 Can Make :- 1/2" to 1.5"Size of Wire :- 14 S.W.GNo. of Nails it mfrs in 1 Minute :- 400 to 450 pcsElectric Motor :- 2 H.P. 1400 R.P.MModel - APN-3Size of Nail APN-3 Can Make :- 1/2" to 2"Size of Wire :- 12 S.W.GNo. of Nails it mfrs in 1 Minute :- 300 to 400 pcsElectric Motor :- 2 H.P. 1400 R.P.MModel - APN-4Size of Nail APN-4 Can Make :- 1" to 3"Size of Wire :- 9 S.W.GNo. of Nails it mfrs in 1 Minute :- 300 to 350 pcsElectric Motor :- 3 H.P. 1400 R.P.MModel - APN-5Size of Nail APN-5 Can Make :- 1" to 4"Size of Wire :- 8 S.W.GNo. of Nails it mfrs in 1 Minute :- 200 to 250 pcsElectric Motor :- 5 H.P. 1400 R.P.MModel - APN-6Size of Nail APN-6 Can Make :- 1" to 5"Size of Wire :- 6 S.W.GNo. of Nails it mfrs in 1 Minute :- 150 to 200 pcsElectric Motor :- 7.5 H.P. 1400 R.P.MModel - APN-7Size of Nail APN-7 Can Make :- 2" to 6"Size of Wire :- 6 S.W.GNo. of Nails it mfrs in 1 Minute :- 100 to 150 pcsElectric Motor :- 7.5 H.P. 1400 R.P.MModel - APN-8Size of Nail APN-8 Can Make :- 3" to 8"Size of Wire :- 4 S.W.GNo. of Nails it mfrs in 1 Minute :- 100 to 120 pcsElectric Motor :- 10 H.P. 1400 R.P.M

We are offering wire nail machine. Technical specification max wire diameter s.w.g. (m.m.) 1.20mm - 2.65mm, 17g - 14g max length 6mm - 45mm, 1" - 1.75" max speed (nailsminutes) 600 power required h.p. 2.00 case size (cms) 130 x 100 x 105

We are offering automatic wire nail making machine. Model no. gauge(mm) power length of nails inch (mm) nails par minute (piece) productionpar 8 hour an 1 19-14 (1.02-2.03) 1.5 hp 0.25” to 1.75” or (6.35-44.45) 500 460 kg an 2 16-11 (1.63-2.95) 2.0 hp 0.50”to 2.75” or (12.7-69.85) 400 750 kg an 3 14-08 (2.03-4.06) 3.0 hp 1” to 4” or (25.4-101.6) 300 975 kg an 4 12-06 (2.64-4.88) 3.0 hp 1” to 5” or (25.4-127) 250 1040 kg an 6 08-04 (4.06-5.89) 7.5 hp 2” to 6” or (50.8-152.4) 150 2500 kg

We take immense pleasure to introduce ourselves as the reliable firm engaged in providing Wire Nail Making Machine in different models to meet the varied demands of the customers. We are one of the sophisticated Manufacturers, Exporters and Suppliers of Wire Nail Making Machine from Punjab. Our reasonable range of Wire Nail Making Machine is mainly used for making wire nails in bulk.  Features : Impeccable performance Sturdy construction High functionality Power efficient