Automatic Switches Dealers

FEATURES :Can be set on desireable light intensity.Auto/manual facility in all models.Generally used at street lights, airport, railway stations, industries & Housing colonies.Good light sensitive component is provided.

Automatic Changeover (Oxy/N2o/Co2) Automated Changeover is a panel attached to manifold having multiple gas cylinders. As soon as the gas in one bank runs below set pressure, it sounds an alarm and switches to the other bank. Specific colored LED lights indicate the bank in use and the bank on standby. The device also indicates whether the gas pressure is in normal or low along the banks and the mains. The Digital Automated Control Panel displays actual pressure in each bank. The feature of parallel system is available in which multiple displays are placed at different locations (or floors) which also show the same indicators as in the main system. These panels also come with RS- 485 Modbus interface for BMS connectivity. Provision is made for adding external NO/NC interface for each bank individually. GSM Gateway can monitor the status of each Automated Control Panel and report status as desired We offer to our customers a range of high performing fully automatic gas control panel for oxygen, N2O, CO2. These equipments are designed with both safety and continuity of flow supply at a constant pressure. Features : A-bank in use. B- bank ready for use. Control panel has in built LED display to indicate normal, low for line pressure. The control panel include pressure gauge (63mm) to indicate the gas pressure of each header and pipe line distribution pressure. Capable to provide a distribution flow rate in excess of 2700 Lpm. The control panel incorporate safety puncture in case of excess pressure i.e 100Psi.

We are one of the leading manufacturers and exporters of LT Switchgear products. Features Special Silver Alloy Contacts for longer life. Best Quality relay used. Enclosure made of CRCA sheet and duly powder coated for long last finish. Suitable for Domestics Shops & Industrial Installation. Available for Petrol Gen. Set & Diesel Gen. Set

Krish Engineer, A Company Based In City Of Ahmedabad Which Is Industrial Nucleus Of Gujarat State, Is A Leading Manufacturer & Supplier Of Range Of Automatic Transfer Switch. This Automatic Transfer Switch Are Design To Cater Low Voltages Power Networks And Manufactured Using The Fine Grade Of Material And Keeping In Mind The Latest Industrial Electrical Standard. An Automatic Transfer Switch (ATS) Is A Type Of Switch Which Spontaneously Transfers A Power Supply From Its Principal Source To A Backup Source When It Senses A Failure Or Outrage In The Principal Source. At Krish Engineer , Customer Can Avail Range Of Automatic Transfer Switch For A System Ranges 100 A -3000A. We Are Pioneer Manufacturer Of ATS In Ahmedabad, Gujarat.The ATS Is Designed For Use In Low Voltage Power Networks In Order To Reduce And Virtually Eliminate Outage Periods Of Critical Loads. ATS Range 100A ~ 3000A Salient Feature: Following Are The Salient Feature Of Our ATS   Extended Product Lifetime Through Minimization Of Arcing Time. 3 Stable Switch Positions (Main Source, Neutral, Emergency Source). Individual Phase Enclosure To Improve Breaking Capacity. Enhanced Main Contact Protection (Overload Capabilities) Current Withstand Capacity: 10kA ~ 100kA Temporary Voltage Is Required High Transfer Capabilities For Inductive And Motor Loads Manual Change-over Easy And Quick Installation

We stand tall as a well-known Manufacturer and Supplier of Automatic Changeover Switches from Lucknow. The Indo Econ Single Phase Automatic Changeover Switch with Current Limiting Device that we offer are performance oriented and have minimal switch over time and highly improved circuit design. They are made using high-grade raw material to ensure their safety in various applications. Avail from us superior quality Automatic Changeover Switches at market-leading prices!

ACCL is used for efficient distribution of generator power in high rise apartments, townships, commercial buildings, etc without overloading the generator. Detailed Description The ACCL will switch the load to generator supply during failure of mains supply. It also acts as a current limiter when load on generator exceeds the pre-set limit thus avoiding any overload on the generator. Specifications 01 Unique - patented design - Contactor based ACCL 02 Heavy Duty - AC 32A and AC22A utilization category 03 Long life - 25000 operations 04 Safe - 5 kA short circuit capacity Tested at Third party lab 05 Energy efficient - Low Power consumption as coil operates only during DG 06 Cool - Low Temp rise as power consumed is less than 0.2VA on EB 07 User friendly - even during overload, load will be On for 10 sec so that user gets some time to switch off unwanted loads. Beep & LED indication. 08 Proven - Tested at third party (UL LAB) 09 Technically sound - Break before make due to higher air gap 10 Convenient - Auto Reset Facility 11 Versatile - Can be used in new buildings as well as for retrofitting (i.e 2 Sub main or 1 Sub main wiring method)

Automatic electrical switch incorporating advanced sensing technology powered by solar energy and robust electrical switching system with wireless communication. This variant eliminates the need to run cables from distribution board to the outdoor installation point of the switch. Sensor can be installed outdoor and will be powered independently by solar panel. Indoor switching system will communicate with sensor over wireless network and switch ON/OFF. Features Outdoor sensor unit and indoor switching unit function as a pair Outdoor unit powered by solar panel for sunlight sensing Indoor unit for switching ON/OFF the electrical load Wireless RF link between indoor and outdoor units Range of communication: up to 100 meters (line of sight) System Immune to other wireless networks. Outdoor unit powered from Solar energy. Indoor switching units are offered in NS-01, 02, 03, ATM. Outdoor unit immune to artificial lights and moon light. Degree of protection conforms to IP 65