Moisture Separator Dealers

1. Baffle Type: Efficiency 60 %2. Centrifugal Type: Efficiency 70%3. Demister Pad Type: Efficiency 80%4. Centrifugal cum Demister Pad Type: Efficiency 99%Moisture is most common contaminant present and the one which probably causes the most damage. Alpha Engineering provides wide range ofmoistrues separators for all flows, line sizes, pressure, temperature, flange ratings with an Advanced Moisture Relief System. 

Special Features :- It is specially designed to reduce moisture and oil content from 2000 PPM to 100 PPM at a very low pressure drop.   Construction :- The outer casing is made of fabrication or casting to withstand high pressure. The elements are made of absorbent & coalescing media.   Application :- It is most suitable for installing in compressed air line for removal of moisture, oil, scale, and other particles (95% down to 3 micron).

Sizes Available : 25 NB, 40 NB, 50 NB, 80 NB, 100 NB, & 150 NB End Connections : Flanged Ends To ANSI 300 Material : Cast Steel ( A 216 Gr, WCB) Other On Request IBR Certificate : Available For IBR Applications Larger Sizes : Available On Request

We are offering moisture separators suppliers in the market and the top wholesaler in india. We supply various types of moisture separators according to the needs of the customers. Our moisture separation system is highly reliable and guarantees a long life. We offer them at prices that would not affect your pocket.

3 Micron Borosilicate Glass Fiber media type Moisture Separator This unique design 3 Micron Borosilicate Glass Fiber media type Moisture Separator is very effective for removal of Moisture from compressed Air. It prevents dirt, dust & water particles to be carried into the pneumatic system. It is recommended to install this Separator just before application point for better performance.

We manufacture a wide assortment of indoor air filtration systems and industrial air filtration systems like air moisture separator, steam moisture separator, industrial moisture separator, etc., that are fabricated using high quality raw material and are used to for the filtration of air. Applicable in various industries, these moisture separators can be customized to suit the specific requirements of our clients.

One Strainer upstream of every trap, control valve, and flowmeter can save you a bundle in annual maintenance and wear & tear costs. Available in Y or T type designs, our strainers remove suspended grit from steam and condensate that would otherwise damage your downstream equipments; with no additional pressure drop.  

Even in the cleanest and best designed clean steam systems, moisture entrainment is possible. This might result in unacceptably low dryness fraction, non-compliance of critical sterilization standards, damage to control valvesinstrumentation and overall low efficiency of the system.

when steam/air is passed through the separator, any entrained water droplets are encouraged to separate and drain away rather than remain in suspension. Steam or air flows around a series of baffles and its velocity is reduced because the space in the separator is large compared with the pipe bore. However the inertia of water droplets carries them on in a straight line so they impinge on the baffles and drain away. The baffles are designed to divert separated water from the flow of steam or air. Together with reduced velocity this prevents re-entrainment. water in suspension- your invisible enemy all steam distribution systems contains a certain amount of water due to condensation and carry-over from boiler turbulence and foaming. A similar problem arises with compressed air systems because water is a natural ingredient of atmospheric air. In both cases, careful draining and trapping will remove much of the water but not all. It cannot remove the water particles suspended in the steam or air. All too often nothing is done to remedy this problem. Because the water cannot be seen it is ignored. The consequences can be very costly indeed. the damaging effects of water in steam systems when water droplets reach the point of usage they needlessly increase thickness of the water film on the heat exchange surface. And water is a very poor conductor of heat. In fact, a water film just 1mm thick is as resistant to heat transfer as a half meter thickness of copper. The water may also carry impurities which will be deposited as scale – another barrier to efficient heat transfer. What’s more, traveling at high velocity, the droplets will both erode and corrode valves and valve seat and shorten the life of pipelines and fittings. the damaging effects of water in compressed air systems suspended water droplets cause similar problems. Pipe, valve and fittings will corrode. Particles of corroded metal may be swept along the system, clogging valves, strainers and traps. At the point of usage, water delivered with air can damage work pieces. Air powered tools will require excessive maintenance and will wear prematurely. design features / benefits rex separatiors safeguard your costly equipmentrex separators will protect your costly equipment from harmful effects of water droplets, because they remove water droplets from steam or compressed air system and increase operating profitability by: improving steam quality to maximize heat transfer and therefore plant efficiency. reducing maintenance costs and extending the life of pipelines, valves, traps, strainers and other associated equipment. protecting compressed air tools and preventing water damage to workpieces. dry steam or compressed air for increased efficiency and longer plant life. effectiveness over a wide range of velocities with minimal pressure drop.

Description: IndoAnushka make Moisture separator with drain module is a value added solution for removal of moisture from the steam headers. Moisture separator with drain module consists of M.S. fabricated moisture separator with completely assembled drain assembly consisting of ball float steam trap, IndoAnushka make MAINTENO strainer with inbuilt blowdown valve and IndoAnushka make MULTIVIEW double window sight glass with deflector and 1 no. Isolating valve completely assembled with interconnecting piping and 1 no. Outlet nozzle as provision for bypass. Available Sizes: 15NB ONWARDS upto 300NB. Pipe Connections: ANSI 150, 300 & 600. BS-10 Table-H, J & K Limiting Conditions: For Moisture Seperator – Max. working pressure and temperature as per flange ratings. For Drain module – Max working pressure-13bars, Max working temp – 180 OC. Materials : Body & Baffles – M.S. Fabricated Trap – C.I with ss internals Strainer – CI with ss internals Multiview- M.S Fabricated Valves – CI