Accelerometer Dealers

This is a breakout board for Freescale’s MMA7361L three-axis analog accelerometer. The MMA7361 Accelerometer Module is a triple axis micro capacitive acceleration sensor. It features an easy analog programming interface where each axis reports acceleration as a voltage level. The sensor requires a very low amount of power and has a g-select input which switches the accelerometer between ±1.5g and ±6g measurement ranges. Other features include a sleep mode, signal conditioning, a 1-pole low pass filter, temperature compensation, self test, and 0g-detect which detects linear freefall. Zero-g offset and sensitivity are factory set and require no external devices. Specification: Two selectable measuring ranges (±1.5g, ±6g) Low current consumption: 400 µASleep mode: 3 µA Low voltage operation: 2.2 V – 3.6 V High sensitivity (800 mV/g at 1.5g) Fast turn on time (0.5 ms enable response time) Support 5V/3.3V voltage input, onboard RT9161, lower pressure drop than the 1117, faster load the appropriate speed, is ideal for high noise power supply environment. Dormancy so that energy can be controlled through the microcontroller IO. Dimensions: 28 * 17mm Note that only one of the two power supply inputs (either 5V or 3V3) should be connected and that the sleep mode input must be set to a logic high level (3V3) to operate normally. Also as the MMA7361 works in 3V3 mode, you should set the analog reference voltage of your Arduino to 3V3.

Adams supply different type accelerometers for different applications. Accelerometers with different mounting configurations, different sizes and weights are available to suit the applications. Both Charge and Integrated electronics type (ICPIEPE) accelerometers are available. Variable capacitance accelerometers are offered for the applications requiring high sensitivity measurements. Accelerometers for special applications like airborne and seismic accelerometers are also available.

Special Purpose Accelerometer Special Purpose Sensors extend the range of vibration analysis and monitoring tasks that can be undertaken by modifying the design or sensor type. Thus, models can be selected that can:  Work at more elevated temperatures  Work at lower frequencies  Measure different vibration parameters  Permit simultaneous measurement of temperature  Permit more than one vibration parameter to be measured simultaneously by the same sensor

Material: Other, Color: White Package Contents:1 Set of Supplies & Accessories InvenSense MPU-6050 with MEMS accelerometer and MEMS gyro";3 Axis Accelerometer, 3 Axis Gyrometer"; Hooks up with Arduino Board and Other Maker Kits"; I2C Based communication with the development board.   The InvenSense MPU-6050 sensor contains a 3 Axis MEMS accelerometer and a 3 Axis MEMS gyro in a single chip. It is very accurate, as it contains 16-bits analog to digital conversion hardware for each channel. Therefor it captures the x, y, and z channel at the same time. The sensor uses the I2C-bus to interface with the Arduino."

The hermetic sealed triaxial industrial piezoelectric accelerometer model 131 is design to monitor the vibration in harsh industrial environment. Triaxial accelerometer uses the industry standard ®icp 2-wire voltage transmission technique with a 2 ma minimum constant current supply. Signal ground is isolated from the mounting surface and outer case to prevent ground loops. Faraday shielding will limit sensitivity to esd to a minimum. Annular shear mode design will prevent from thermal transient and from spurious signal from high transverse vibrations. Low noise electronic and a temperature compensated design will give you accurate result over the complete temperature range. Large choice of frequency range will help to fit almost every customer requirements. Low frequency accelerometers (a=9x, 0x) incorporate a low-pass filter within the conditioning electronics. This filter attenuate the sensor mechanical resonance and the associated distortion and overload. Triaxial accelerometer is used for vibrations measurement in the rugged environments of industrial machinery monitoring. Used for vibrations measurement in the rugged environments of industrial machinery monitoring. ®icp transmission mode annular shear mode (better than obsolete compression design) dual case isolation with internal faraday shield (suitable for permanent installation, no need for insulation pad, no ground loop) low, medium and high frequency version (10, 50, 100, 500, 1000 mvg) hermetically sealed (laser welded)

This accelerometer kit directly interfaces with ProvibTech’s signal conditioners: DTM, TR transmitters, DM Dual Monitors and PT580 vibration switches to measure case vibration in acceleration or velocity

We are offering triple axis accelerometer mma7361. introduction the mma7361 from freescale is a very nice sensor with easy analog interface. The mma7361 is a 3.3v part and outputs an analog voltage for each of the three outputs. This voltage is in ratio to the measured acceleration and to the supply voltage (ratiometric). It has selectable sensitivity by dip switch. you will need some extra hardware to convert this analog signal to a usable digital one. the arduino is really good option for it. specification voltage:3.3-8v selectable sensitivity:±1．5g/6g low power:500μa @ measurement mode，3μa @standby ； high sensivity: 800 mv/g @ 1.5g； interface:analog output low pass filter size:23x26mm weight: 5 gram shipping list mma7361 (1 unit) analog cable (3 units)

Our products include general and special purpose accelerometers, velocity sensors, eddy current probes and lvdts. They are used in a diverse range of applications, such as; automotive, aerospace, industrial processing, power stations and wind turbines.

This is a breakout board for Analog Devices analog 3 axis accelerometer. The ADXL335 is a small, thin, low power, complete 3-axis accelerometer with signal conditioned voltage outputs.

Accelerometer, 14/8bit, 3axis, 16qfn acceleration range: ± 2g, ± 4g, ± 8g no. Of axes: 3 interface type: i2c, serial sensitivity per axis: 1024count / g sensor case style: qfn no. Of pins: 16 supply voltage range: 1.95v to 3.6v operating temperature range: -40°c to +85°c msl: msl 3 - 168 hours svhc: no svhc (20-jun-2011) interface: i2c sensitivity: 4096counts/g

Acceleration sensors that is widely appreciated in the national market for its sophisticated design and technically advanced features. The Acceleration Sensor, offered by us is procured from the reputed manufacturers having years of experience in the domain. Developed from hi-tech components, our Acceleration Sensor offers high performance in every use.

we offer Accelerometers. Adams supply different type accelerometers for different applications. Accelerometers with different mounting configurations, different sizes and weights are available to suit the applications.