Air Inlet Filter Dealers

Air Intake Filters, also known as suction filters, are used in Gas Turbines, Engines, Compressors, Blowers, etc. We can provide a complete system. Also, we can provide a wide variety of construction and media. They are available in different sizes to match the requirements of the clients.

We are offering Gas Turbine Air Intake Filter cartridges are modern and reliable for air intake applications. They ensure high efficient filtration of dust and other contaminants even in the most polluted environments. Normally these are made of mixture of polyester & cellulose and some time 100% polyester media. These media have much better pleat ability & dimensional stability. Pleated filter media offer high filtration efficiency, very fine retention level, easy clean ability & aesthetically good product than other normal filter media.

• Material: Metal
• Finishing: Polished
• Shape: Round
• Condition: New
• Usage: Air Filter
• Country of Origin: India

Inlet air filters are essential on any gas turbine. Filtration systems have evolved from simple coarse solid particulate removal systems to complex systems that remove both solid and liquid particles. cleaning cartridge filters offer an excellent combination of filtration and dust collection. Some of the unique features of this filter are :Suitable for Pulse Cleaning , Suitable for operation at 100% R.H. & upto 55° c ambiant temp.

MICROFINE offers GT Air Intake Filters with the following Specifications. Type: MICROFINE type filters are manufactured in cylindrical and conical shape Screen: Internal frame made of Electro Galvanized expanded steel to ensure that media keeps its formEnd caps: Galvanized steel or plastic end caps bonded with polyurethane sealant to obtain zero by-pass cartridge filter Gaskets: Rigidly bonded on each cap Media stabilization: Self-supporting Media: High Efficiency cellulose media blended with polyester fibre suitable for pulse clean filtration moisture resistant and cleanable.

• Shape: Round
• Country of Origin: India
• Filter Thickness: 25 mm
• Usage: Use Air Fillter
• Medium Material: Microfiber
• Rated Flow: 50 CFM

• Country of Origin: India
• Condition: New
• Total Carbohydrate: 1 Year
• Filter Dimensions: 40X50X30cm
• Packaging Type: Wooden Box, Carton Box
• Overall Height: 130mm
• Particle Size: 100 Micron
• Pore Size: 0.22
• Filter Length: 2 Inch
• Diameter: 5 Inch
• Filtration Capacity: 10 Microns
• Specialities: Ease Of Install, High Tensile, High Quality
• Brand Name: Britomatics

• Specialities: It's simple to clean, Exceptional flow efficiency, The air-to-cloth ratio is very high, There is a lot of space.
• Diameter Of element: 325 mm, 445 mm
• Length Of filter Element: 647 mm, 660 mm, 673 mm.

• Number Of Flower: Air Inlet Filter
• Packaging Type: Black, Grey, Silver, White
• Total Carbohydrate: 1yr, 2yrs
• Application: Automobiles, Machines
• Weight: 100-200gm, 200-300gm, 300-400gm, 400-500gm
• Condition: New, Used
• Structure: Oil Mist Cartage
• Depth Ranging: From 150 mm to 350 mm

Since modern jet turbines use multiple compressor stages, some newer engines for new aircraft designs have the bleed air inlet between compressor stages to reduce the temperature and reduction in the need for compressed air in more electric aircraft.

Gas turbine Air Intake Filter Elements are most suited for all latest high performance gas turbines which are often subjected to extreme dusty, stormy and humid conditions.

• Brand Name: Maan
• Usage: Screw Air Compressor
• Filter Type: As per part No
• Material: Aluminum
• Packaging Type: white
• Model Name/Number: For all Models/all brands
• Filtration Medium Material: Fiberglass
• Filtration Grade: Pre Filter
• Efficiency: 99.9%
• Automation Grade: Semi-Automatic

We are designing and developing wide range of air filteration system, inlet air filters for gas turbine and turbo machinery. Protect the machine against dirt Increase engine efficiency Cut maintenance cost Self cleaningPulse cleaning Air Inlet Filters BarrierStaticNon-Pulse Air Inlet Filters.

We provide ventilation units for industrial halls or machinery houses incl. planning, designing and manufacturing with the following specifics:Calculation estimation of waste heat of machinery and equipment, We are interested in, especially, proprietary solutions with special acoustical requirements.

Air intake filters are also called suction filters. These are for Engines, Compressors and Blowers, Gas Turbines etc. We can offer you complete system as well as filter elements. The filtration efficiencies of such filters depend on application. We can offer a wide range of media and construction. 

• Material: Plastic
• Dimension: 12.5 x 8 x 5 cm
• Capacity: 250 ml
• Variant: Oxygen Concentrator
• Application: Clinic, Hospital

Air intakes must often handle large amounts of water from heavy rain, fog, mist and in special area´s in the world even sand. Therefore dedicated air intake systems are very important to protect the air handling system at the very beginning

• Material: Aluminum
• Usage/Application: Air Compressor
• Weight: 100 g
• Size: 20mm

IAFIPL Pulse Jet Bag Filter (CIRCULAR) offer excellent filtration efficiency for a wide variety of process dust and fume control systems. The low tangential (side) inlet technique allows larger dust particulate to separate from airstream below bags section rather than traveling through media array

• Test Standard: Ashrae 52.2
• Available Grades: G3 - F6
• Available Efficiencies: 85% & 95%

AFi Pocket Cubes are made with a two-stage 100% non-woven polyester media. The seams of all AFi Cubes are sewn together for maximum durability. The Internal Supported Cubes use a heavy-duty internal wire frame for added rigidity. The back panels of the Unitized Cubes are fastened in the center for better airflow and media utilization. Our Pocket Cubes offers medium efficiency in a wide range of applications. The rigid, self-seal design of these filters helps prevent air bypass and allows the filters to operate under adverse conditions, especially where high humidity is present. The open fibers on the intake layer catch the larger particles allowing the finer particles to be caught by the dense outflow layer. The AFi Pocket Cubes are less restrictive to airflow and performs well in moderate dust loading applications. Filters perform well in both variable and constant volume systems    Boons   Heavy duty construction High moisture resistance & durability Versatile self seal design Two stage filtration 100% non woven thermally bonded media

High energy cost and demand worldwide have increased the focus on energy efficiency in many industries and market sectors. Specifically, the Power Generation sector is driven by the need for affordable electricity Gas turbine Air Intake Filter Elements are most suited for all latest high performance gas turbines which are often subjected to extreme dusty, stormy and humid conditions. They are manufactured from Impregnated cellulose or synthetic blend filter media in all sizes and shapes for replacement market and also offers economical, high-quality spare cartridges.   Gas Turbine Air Intake Filters are used to improve the energy efficiency.GT Air Intake Filters are normally made up of a mixture of cellulose and polyester and sometimes 100% polyester media. Pleated area offers high filtration area, efficiency and easy clean ability. GT Air Intake Filters at Filtcare Technology, Leading Manufacturer, Supplier, Exporter, Wholesaler, Retailer, Traders of GT Air Intake Filters from Ahmedabad, Gujarat, India.   FEATURES AND BENEFITS Washable & cleanable Offers high filtration area High air to cloth ratio Pleated cartridges for pulse-jet systems Expanded metal retainers on both sides Variety of media choices TECHNICAL SPECIFICATIONS Configuration:- Cylindrical & Conical Media:- Mixture of Cellulose & Polyester Media Cylindrical Element Sizes: - 325 x 660 mm Long Conical Element Sizes:- 445 x 660 mm Long End Caps MOC:- Galvanized Steel   APPLICATIONS Gas Based Power Plants all types of Critical Air Intake applications

The Gas Turbine Air Filter System, supplied by us, is manufactured using carbon steel and acclaimed for its precise engineering. Classic Machine Tools, is a leading fabrication vendor for OEMs in India for Inlet ducting system, Silencer, Elbow, Transition duct, pulse style or static style inlet housings and support structures. Inlet air filtration systems which ensure turbines continually operate at maximum output efficiency.

• Specialities: Low pressure drop due to pleated configuration, Easy to install, No bypassing, High dirt holding capacity, High filtration efficiency

Hepa filters are designed to meet requirement of very fine filtration up to 0.3 micron at high efficiency of 99.99 %. We have added a new feature in conventional hepa filters by using spun bonded polyester media which is cleanable in nature. These are available with different coatings like PTFE coating, PTFE lamination & more for better dust releasing. Due to hydrophobic & oleo phobic treatment on media, it does not allow any moisture & oil contents to pass through. The essential functions of HEPA Filters are to improve indoor Air Quality and to protect downstream equipments and facility components. Good HEPA Filters controls all human sneeze droplets.

• Brand Name: Philips
• Material: Plastic
• Shape: Rectangular
• Number Of Flower: Air Intake Filter
• Total Carbohydrate: 1 Year
• Country of Origin: India
• Application: Clinic, Hospital

• Size: Standard
• Number Of Flower: Air Compressor Parts
• Material: Brass
• Certification: ISO Certified
• Application: Air Compressor Use
• Packaging Type: Yellow
• Finishing: Polished
• Country of Origin: India
• Brand Name: DELCOT
• Operating Temperature: NA
• Power Source: NA
• Total Carbohydrate: NA
• After-Sales Service Provided: NA
• Configuration: NA
• Location: CHENNAI
• Lubrication Style: NA
• Mute: NA
• Surface: NA

Air Intake Filter, Steel Grits, Steel Shots, Cut Wire Shot