Automatic Road Blocker Dealers

Road Blockers are used for blocking the roads by restricting the entry of vehicles of all heavy and light weight vehicles. We manufacture, supply and export strong and sturdy Road Blocker. These Road Blockers are used to block heavy vehicles traveling at the speed of 40 Km/hr. Specifications (3-6M) : Tensile strength of structural steel components : 490 � 600 N/mm2Drive Unit Electro : Hydraulic / ElectromechanicalWall thickness of structural components : 6 mmBlocking height above road level : 750-1000 mmElectric motor capacity : Approx. 3.0-7.5kW, 3 phase, 50/60 HzStatic impact load : 600 KNSurface protection : Tri-Protected layers in accordance with special coating (zinc plus 2 layers of plastic coating).Wheel load : 100 Ton verticallyHydraulic : Castrol EP 68 HYSPINOperating Temperature : - 5oC to +55oCOperating time Raising : 4-5 sec., lowering 3-4 sec.Power failure/emergency : operation By integrated hydraulic hand pumpThe paint used will be anti-corrosive and luminous for night and bad weather.Electric controls Steel or glass-fiber reinforced cabinet, IP 65 Color Pattern Front of blocking segment will be of different and distinct color pattern as decided by owner.Material of Construction : Engineered Structural Steel for high-impact.Integration: can be done with any Surveillance & Access Control System Features : Long term Corrosion ProtectionHigh emergency impactsAll Structural component is made up of steel with high tensile strengthFast Operating PeriodAccumulator for emergency operation Blocking Segment with Hydraulic lockingAll Electronics Parts CE Certify/TastedIn Built Warning Lights for Access ControlHand pump for Emergency Operation in case of power failurePowerful Electro-Hydraulic Drives and ControlInduction Loops / Safety Loop

Road blocks offer maximum security for vitally sensitive areas against unauthorized entry of vehicles of all sizes and weights. Blocker is designed to disable and block vehicles traveling at speed of 40 Km/hr with gross weight of 30 tones SPECIFICATIONS(3-6M) Drive Unit Electro:Hydraulic/Electromechanical Electric motor capacity:Approx.3.0-7.5kW,3 phase,50/60 Hz Tensile strength of structural steel components:490 – 600 N/mm2 Wall thickness of structural components:6mm Blocking height above road level:750-1000 mm Static impact load:600 KN Wheel load:100 Ton vertically Operating time Raising:4-5 sec.,lowering 3-4 sec. Surface protection:Tri-Protected layers in accordance with special coating (zinc plus 2 layers of plastic coating). Hydraulic:Castrol EP68 HYSPIN Operating Temperature:- 5ºC to +55ºC Power failure/emergency : operation By integrated hydraulic hand pump Electric controls Steel or glass-fiber reinforced cabinet, IP 65 Colour Pattern Front of blocking segment will be of different and distinct colour pattern as decided by owner. The paint used will be anti-corrosive and luminous for night and bad weather. Material of Construction: Engineered Structural Steel for high-impact. Integration: can be done with any Surveillance & Access Control System. Features High emergency impacts Fast Operating Period Long term Corrosion Protection All Structural component is made up of steel with high tensile strength Accumulator for emergency operation Blocking Segment with Hydraulic locking In Built Warning Lights for Access Control Powerful Electro-Hydraulic Drives and Control All Electronics Parts CE Certify/Tasted. Hand pump for Emergency Operation in case of power failure. Induction Loops/Safety Loop.

Road Blocker is an electro hydraulically operated rising step obstruction which rises above the ground level on giving a valid input signal and thus prevents unauthorized intrusions at entryexit points of high security (Z+) premises. When in lowered position the vehicles can pass through, thereby providing a good enhanced security blockage system. The housing and the blocking element of the Road Blocker are designed in full core steel profile construction with TESCON 4S coating, ensuring maximum safety against corrosion. The impact face of these road barrier is reinforced with steel ribs and impact plates to transfer mechanical forces to reinforced concrete foundation.

We are offering automatic road blockers. Key features . Standard widths from 1.5m to 4m can be customised to any specific dimension. . Above ground control unit houses hydraulic and electronic systems for ease of maintenance. . High quality polyester powder coated frames. . High safety mergin crash ratings. . Programmable control system for complete flexibility. . Line or off line mode, optionl. . The series 500 range of road blockers has been designed for situations where it is imperative that unauthorised vehicles are stooped or where barriers do not provide a high enough deterrence.

Electromechanical, surface mounted security road blocker for important places and buildings requiring higher degree of security. The Road-Blocker is widely used to control vehicular access at high security and medium-high security sites all over the World. It is also increasingly being used to provide vehicle access control at sites which, whilst not “high security” nevertheless have problems such as car theft, vandalism, avoidance of parking charges and illegal parking / access. It is also used to provide complete protection of premises which might be otherwise vulnerable to “Ram-Raiding”. However the most familiar locations for the SHALOM Hydraulic Road Blockers are still Military Bases, Entrances to Bank Vaults, Cash in Transit and Security Guarding Companies, Police Stations, Airports, Power Stations, Government Buildings and Embassies

The Road Blocker is widely used to control vehicular access at high security and medium high security sites all over the World It is also increasingly being used to provide vehicle access control at sites which whilst not high security nevertheless have problems such as car theft vandalism avoidance of parking charges and illegal parking  access. Road Blockers provide higher levels of security with built in stopping power, and are used extensively to protect perimeters and access points of critical infrastructure & public places including airports, oil & gas, financial institutes, government buildings, data centres, military bases, stadia and shopping malls from a vehicle borne attack. The Road Blocker can be interfaced to any access control systems. Traffic Light System can be  included as standard There are different types of road blockers in the market depending upon the type,shape and usage. Hydraulic Rising Roadblockers The barrier front face is formed by curved plating closed at both ends with a flush mount design,the entire metal frame sealed into the concrete pit Surface Mount Hydraulic Roadblockers surface mounted road blocker feature quick installation into difficult locations where excavation for concrete pit is difficult avoiding subsurface drainage problems. Shallow Mount Hydraulic Roadblockers Shallow Mounted road blocker where digging the ground is not much of a possibility, thanks to its accordion like structure, it takes less space and requires less digging work. Portable Hydraulic Roadblockers answer the need of our clients that require a temporary barricade system to address a specific threat or secure a facility during special events. Electromechanical Roadblockers answer the need of our clients that require a cost effective barricade system to to secure a facility with a low security level such as parking lots     Features Industrial hydraulic pump drive unit Motor protection Programmable logic control system LED Traffic Light Override Switch Switched fused supply Mains indicator lamp Reinforced hoses for long service life

Hydraulic road blocker is high end security product used for protection against unwanted vehicles ramming into important and strategic places like hospitals, hotels, government buildings, schools, defense establishments, embassies, industries etc….

This road blocker is an ideal product to protect high security establishments, iconic buildings and critical infrastructure. 2m-8m road blocker widths (560mm increments) 800mm road blocker height (fully raised) Programmable Logic Controller (PLC) Optional Emergency Fast Operation EFO (less than 1 second)     Features: Mainly used to control vehicles at customs, military bases, important government departments, airports, jails, nuclear power stations, docks and logistics centers. Solid and endurable structure, strong bearing capacity Perform exact control and operate reliability and stably Able to adapt to the advance working environment under working temperature: -20- 50°C Low-pressure hydraulic driving mode is used Less trouble rate, high reliability, long service life, less and easy maintenance Can combine with other control equipment to realize auto control Manual operating mode is provided In case of electric failure or trouble, it can manually operate the movable barrier to return to the horizontal position The road blocker can be customized to interface with a wide range of access control equipment to suit specific customer requirements. Available configurations include (but are not limited to) inductive loop systems, card readers, communication equipment and manned guard emergency systems.

  The series of rising vehicle/Road blockers are designed to prevent unauthorized vehicles from crashing through controlled entry and exit points. Provide effective traffic control where other conventional barriers are unable to provide an adequate deterrent. Built for fast reliable and efficient operation, these barriers are capable of withstanding high impact loads and are ideally suited for installation at toll collection booths where normal traffic is controlled by high speed boom gates. Ideal for maximum security sites such as Government installations, Royal palaces, Military bases, Police stations, Embassies, Airports etc. Stops all unwanted traffic. Blockers are available up to 3.5m long with rising heights of between 300mm to 750mm Visual surveillance is recommended during the operation of the barrier.   Functions and Features  Strong and durable structure, great capacity of weight bearing; Stable movement, low noise;Workable in bad weather environment; Adopting low hydraulic pressure driving measure, few failure happening, dependable and long serving life; Simple and easy maintenance; Compatible with other controlling facilities to achieve automatic control; Manual operation mode can be used in power off or accidental cases; the raised gate plate can be put back to its horizontal position by manual operation. Main hydraulic components are imported well-known products, which ensure the dependable quality and long serving life.  The barrier front face is formed by curved plating closed at both ends, white enameled with chevron shaped red reflecting stripes, which encloses the mechanism. Metal frame sealed into the concrete pit. Hydraulic power unit (not presented on the illustration), to be placed separately from the Road Blocker, containing: motor hydraulic pump oil accumulator oil tank filter with plug and oil gauge hydraulic valves manometer pressure regulator and security valve Push button box (open - stop - close)   Technical Parameters  Carrying capacity:≤120 tons Voltage: 380V or 220V (optional) Power consumption: max. 1.5 kW Rising part height: 300mm ~ 750mm (optional) Standard rising and lowering times: between 3 and 5 seconds. Hydraulic oil type:45#hydraulic oil or Anti-Freezing oil Working Environment Temperature:-20°C to +55°C Emergency manual override system for use in the event of a power failure. Compatible with all types of access control and safety systems. Fully galvanized frame and blocker unit with painted finish. IP65 rated control panel housing. 100% Duty Rated Removable structure to facilitate installation and maintenance In case of power off, the barrier can be manually down. With temperature surveillance and automatic compensation function which can Ensure systems work normally in low temperature. With infrared protection function to avoid the barrier rise up wrongly when there is objects on it (optional) Nails (optional) and traffic light (optional) MCBF (Mean Cycles Between Failures), recommended maintenance: 1,500,000 Exterior Structure Main composing: 1. Hydraulic road barrier is composed of main machine, 2. Hydraulic driving system, 3. Electric control system.  Main machine is composed of driving unit and balancing unit, etc., put on the passageway of vehicles; the moving gate plate is even with the road surface. The hydraulic driving system is composed of 3-phase motor, hydraulic pump, hydraulic oil cylinder, assembled valve parts, oil box, and pipelines, etc. This system shall be installed at the place easy to operate of maintenance. Electric control system provides the power to hydraulic driving system and controls the working status of electromagnetic commutating valve. This system can use the special electric control box made by our company, or use other box according to overall control system and control mode the user has selected and set. The electric control box shall be installed at the place easy to operate, keeping away from rain and wet. It needs a good earthling. Options Additional LED traffic light. Post to install traffic light(s) Longer hydraulic hose: 10 or 15 m. Vehicle loop detector with inductive loop Work to be provided by the customer Power supply to the control unit. Electrical connection wiring between the control unit, the hydraulic power unit, the traffic light(s) Reinforced concrete pit with rainwater drainage and fixing frame installation (3) Installation of hoses between the pit and the power  

HOM Automatic Road Blocks provide reliable access traffic control by electro-mechanically moving the spikes up, to an active or secured position, and then down to allow unrestricted passage to authorized vehicles. Road blocks are generally installed at places like hotels, sensitive check points, bank headquarters, defense bases, oil & power sector plants, industrial entry & exit points etc.

The Road Blocker is widely used to control vehicular access at high security and medium high security sites all over the World.  Road Blockers provide higher levels of security with built in stopping power, and are used extensively to protect perimeters and access points of critical infrastructure & public places including airports, oil & gas, financial institutes, government buildings, data centers, military bases, stadia and shopping malls from a vehicle borne attack. The Road Blocker can be interfaced to any access control systems. Traffic Light System can be  included as standard There are different types of road blockers in the market depending upon the type, shape and usage. Hydraulic Rising Road blockers The barrier front face is formed by curved plating closed at both ends with a flush mount design, the entire metal frame sealed into the concrete pit Surface Mount Hydraulic Road blockers surface mounted road blocker feature quick installation into difficult locations where excavation for concrete pit is difficult avoiding subsurface drainage problems. Shallow Mount Hydraulic Road blockers Shallow Mounted road blocker where digging the ground is not much of a possibility, thanks to its accordion like structure, it takes less space and requires less digging work. Portable Hydraulic Road blockers answer the need of our clients that require a temporary barricade system to address a specific threat or secure a facility during special events. Electromechanical Road blockers answer the need of our clients that require a cost effective barricade system to secure a facility with a low security level such as parking lots.     Features Industrial hydraulic pump drive unit Motor protection Programmable logic control system LED Traffic Light Raised Height 35cm to 100cm

The HYCL Series of rising vehicle blockers are designed to prevent unauthorized vehicle form crashing through controlled entry and exit points . Built for reliable and efficient operation, these blockers are capable of withstanding high impact loads and are ideally suited for installation at roll collection booth where normal traffic controlled by high speed boom gates. visual surveillance is recommended during the operation of the barrier.

Road blockers are designed specially for entrance points having high security zones or areas. Even though the attack can be from high tonnage vehicles with high speed, road blocker is a unique option which can stop the vehicle on the spot. Drive unit is hydraulic, but in case of power failure road blockers can be lowered or lifted with the help of manual hand pump.

Road Blocker Is an effective means of controlling access to high security areas, stopping vehicles or heavy trucks form entering. The Road Blocker can be utilized for vehicle entrance control, security screening areas, such as: Military Installation Govt. Buildings Embassies Production Facilities Oil Refineries Depot Hotels, Airport, Stadiums & High Security Areas, etc.

Product Name : Hydraulic Road Blocker Road Blockers are used in Delhi Parliament. They are considered as ultimate protection against entry of big or cargo trucks or vehicle loaded with ammunition. Hydraulic Road Blockers come out from road level and block the way. They destroy the vehicle and stalled them completely.