Automatic Spindle Machine Dealers

STANDARD EQUIPMENTS  :Front Slide, Drill Slide, One Vertical. Front Slide, Stop Bar, One Collet. One Drill Holding Plunger With Collet. Electric Drive Motor Coolant Pump, Electricals. One Set of Cams, Bar Feed. One Set of Tool Holders.ADDITIONAL ACCESSORIES  : (AT EXTRA COST)Rear Front Slide, Long Turning Attachment (Front & Rear), Double Drilling Attachment 3. Speed Counter For Spindle Speeds, Feed Change Gear Box with 36 Feeds. Various Type of Tool Holders, Cams, Collets Chamfering Tool Holder, Knee Tool Holder.

From traditional payment methods to modern ones, we are familiar with all of these payment methods. According to the suitability of patrons, we ensure the payment for an order is done conveniently. The product basket we deliver is available in Karnataka(India) and across the nearby markets ensuring complete customer satisfaction.

By employing qualitative raw material, our entire range is processed. We, as a promising name, procure it from the trusted places only. We make available different payment options to suit the convenience level of the clients. We entertain both online and offline payment processing methods for the convenience of our customers.   Features of the Multi-Spindle Drilling Machine : Specially designed for Scaffolding pipes drilling operation. Machine will have the capacity to load 40 NB, 2000mm length pipes, for auto mode and 3000mm in semi auto mode Drilling Pitch will be 120mm Please note that our machine has 14 spindles fixed in particular pitch. They are not adjustable. If any change in, pitch and no of holes to be drilled, is required please specify in your enquiry. For Drill height adjustment-adjustable Sleeves Type Din 6327 with MT-2 Taper will be provided. (Max drill size 17.5 mm with MT2 taper shank) Machine will be equipped with automatic loading of the pipe from loading table to the V-Block for drilling. Machine will have Manual/semi-auto and Automatic Mode Selection in operation. In manual mode, individual functions of the machine can be operated manually during initial machine setup. After machine setup is completed, it can be run in Semi auto or Automatic-mode by selecting Semi auto or Auto Mode Automatic cycle sequence is as below. Positioning of the pipe. Clamping of the pipe. Slide up with rapid movement till the drill point. Coolant ON & Slide up with feed movement to drill the pipe on one side.

Winding machines are designed for the production of different coils from various application, Machine models varies depending on the size and the Volume requirement from low, medium and high volume segments. Machine are equipped with powerful four axes driven by a Servo Motor with a programmable control system, these machines can wind and wrap automatically with the start and finish terminations. They are more flexible, user friendly, Machines can also be integrated directly, without shuttle, on Coil Production Lines for higher production volumes. These machines can be integrated with other accessories, finishing machines such as soldering and welding, production and assembly lines. Features : 4-axes AC servo Motor transmission system for precise position control and for higher speeds and torques. QCT tooling design 0o 90o 120o wrapping angle design. Equipped with quality tensioner controls for fine winding quality Automated wire assortment, leaving no residual wire. High level language instruction, with 6 touch panel program with user friendly. Password protected program to ensure authorization to operate the machine. Auto load/unload for enhanced productivity Optional : Auto load/unload bar, Turret load / Unload device. Twister, Air cutter, Bifilar winding, Wire break sensor.

We make sure that the packaging of products is done using qualitative material in order to deliver the products safely. Only after complete inspection, we deliver the products in the dedicated time span. We are a noteworthy name and work hard to attain complete client satisfaction. And, for achieving this objective, we facilitate them with easy payment modes.   Details : Features of the Multi-Spindle Drilling Machine Specially designed for Scaffolding pipes drilling operation. Machine will have the capacity to load 40 NB, 2000mm length pipes, for auto mode and 3000mm in semi auto mode Drilling Pitch will be 120mm Please note that our machine has 14 spindles fixed in particular pitch. They are not adjustable. If any change in, pitch and no of holes to be drilled, is required please specify in your enquiry. For Drill height adjustment-adjustable Sleeves Type Din 6327 with MT-2 Taper will be provided. (Max drill size 17.5 mm with MT2 taper shank) Machine will be equipped with automatic loading of the pipe from loading table to the V-Block for drilling. Machine will have Manual/semi-auto and Automatic Mode Selection in operation. In manual mode, individual functions of the machine can be operated manually during initial machine setup. After machine setup is completed, it can be run in Semi auto or Automatic-mode by selecting Semi auto or Auto Mode Automatic cycle sequence is as below : Positioning of the pipe. Clamping of the pipe. Slide up with rapid movement till the drill point. Coolant ON & Slide up with feed movement to drill the pipe on one side.

We ensure that the payment procedures we undertake are completely secured. Credit cards, purchase cards, PINless debit cards, bank account transfers, cash payments, etc., are some of the modes of payment that we accept. We strictly follow the packaging guidelines and we ensure that finest quality packaging material is used as packaging protects the enclosed product from physical, chemical and microbiological invasion.  DETAILS Features of the Multi-Spindle Drilling Machine Specially designed for Scaffolding pipes drilling operation. Machine will have the capacity to load 40 NB, 2000mm length pipes, for auto mode and 3000mm in semi auto mode Drilling Pitch will be 120mm Please note that our machine has 14 spindles fixed in particular pitch. They are not adjustable. If any change in, pitch and no of holes to be drilled, is required please specify in your enquiry. For Drill height adjustment-adjustable Sleeves Type Din 6327 with MT-2 Taper will be provided. (Max drill size 17.5 mm with MT2 taper shank) Machine will be equipped with automatic loading of the pipe from loading table to the V-Block for drilling. Machine will have Manual/semi-auto and Automatic Mode Selection in operation. In manual mode, individual functions of the machine can be operated manually during initial machine setup. After machine setup is completed, it can be run in Semi auto or Automatic-mode by selecting Semi auto or Auto Mode Automatic cycle sequence is as below.  Positioning of the pipe. Clamping of the pipe. Slide up with rapid movement till the drill point. Coolant ON & Slide up with feed movement to drill the pipe on one side.

We ensure that the payment procedures we undertake are completely secured. Credit cards, purchase cards, PINless debit cards, bank account transfers, cash payments, etc., are some of the modes of payment that we accept. We strictly follow the packaging guidelines and we ensure that finest quality packaging material is used as packaging protects the enclosed product from physical, chemical and microbiological invasion. Details Features of the Multi-Spindle Drilling Machine Specially designed for Scaffolding pipes drilling operation. Machine will have the capacity to load 40 NB, 2000mm length pipes, for auto mode and 3000mm in semi auto mode Drilling Pitch will be 120mm Please note that our machine has 14 spindles fixed in particular pitch. They are not adjustable. If any change in, pitch and no of holes to be drilled, is required please specify in your enquiry. For Drill height adjustment-adjustable Sleeves Type Din 6327 with MT-2 Taper will be provided. (Max drill size 17.5 mm with MT2 taper shank) Machine will be equipped with automatic loading of the pipe from loading table to the V-Block for drilling. Machine will have Manual/semi-auto and Automatic Mode Selection in operation. In manual mode, individual functions of the machine can be operated manually during initial machine setup. After machine setup is completed, it can be run in Semi auto or Automatic-mode by selecting Semi auto or Auto Mode Automatic cycle sequence is as below. Positioning of the pipe. Clamping of the pipe. Slide up with rapid movement till the drill point. Coolant ON & Slide up with feed movement to drill the pipe on one side.

We ensure that the payment procedures we undertake are completely secured. Credit cards, purchase cards, PINless debit cards, bank account transfers, cash payments, etc., are some of the modes of payment that we accept. We strictly follow the packaging guidelines and we ensure that finest quality packaging material is used as packaging protects the enclosed product from physical, chemical and microbiological invasion.   Details Features of the Multi-Spindle Drilling Machine Specially designed for Scaffolding pipes drilling operation. Machine will have the capacity to load 40 NB, 2000mm length pipes, for auto mode and 3000mm in semi auto mode Drilling Pitch will be 120mm Please note that our machine has 14 spindles fixed in particular pitch. They are not adjustable. If any change in, pitch and no of holes to be drilled, is required please specify in your enquiry. For Drill height adjustment-adjustable Sleeves Type Din 6327 with MT-2 Taper will be provided. (Max drill size 17.5 mm with MT2 taper shank) Machine will be equipped with automatic loading of the pipe from loading table to the V-Block for drilling. Machine will have Manual/semi-auto and Automatic Mode Selection in operation. In manual mode, individual functions of the machine can be operated manually during initial machine setup. After machine setup is completed, it can be run in Semi auto or Automatic-mode by selecting Semi auto or Auto Mode Automatic cycle sequence is as below. Positioning of the pipe. Clamping of the pipe. Slide up with rapid movement till the drill point. Coolant ON & Slide up with feed movement to drill the pipe on one side.

Automatic Single Spindle Machinery, Garage Tools, Pneumatic Tool

Single Spindle Automatic Lathe Machine, Auto Mats, CNC Boring Machine

Single Spindle Bar Automatic Lathe Machines, Bed Lathe Machine