Barrels Dealers

Barrel plating is widely employed for the bulk processing of small to medium sized components. The types of barrel plating include perforated barrels which are immersed in plating solution and open ended solid barrels in which the solution, the anode and the work are contained inside the barrel (inclined). Barrels are available of suitable plastic material with perforation of 3mm, 1.6mm, or herringbone. The inclined plating barrels are available in four capacities 0.14 litres (Mini), 0.56 litres (Minor), 2.25 litres (Major) and 9/14 litres (Master). With the built in mechanism, the barrel is emptied efficiently, simply by hand with minimum effort, discharging the plated articles through a chute into a basket thus eliminating hoist. These barrels are ideally suited for use in limited space, and suitable for, most solutions except chrome. Wasteful build-up of metal inside the barrel is minimised by specially designed cathode contacts which are completely covered by the articles during deposition. The large capacity of the submerged barrel and the rapid turnaround of loads give the Numinik a greater rated output than most barrels of comparable size.

Situated in Kolkata West Bengal in India Rmco offers Fuse Barrel With Fibre Glass Tube And Heavy Duty Metal Parts For DROPOUT FUSE.   Price:Rs.850/-(11Kv,200AMP),Price:Rs.1200-(33Kv,200AMP)   Price:Rs.1200/-(11KV,400AMP),Price:Rs.1500-(33KV,400AMP)

We are offering manual barrel, which is manufactured with precision using advanced technology. The manual barrel is widely demanded in various industries owing to its qualitative features. Our manual barrels are offered in various specifications to cater the client’s requirement. known for optimum productivitycost effective operationdurability

The company has a vast experience in manufacturing high quality Conical Twin Screw Barrels. We are the prominent Manufacturer, Supplier and Exporter of Conical Twin Screw Barrels. Conical Twin Screw Barrels are widely used for different industries in specific purposes. Our Conical Twin Screw Barrels are available at the affordable market price. Features Excellent qualityReliable and durableEfficientHigh performanceMade from using superior quality nitro-alloy EN - 41b steelEspecially and highly finished ground or honed boresConsidered as a precious part of an extruder Advantages Ready for bulk dealingQuick deliveryReasonable costInternational standard

High wear resistance sleeve fitted barrels for conical twin-screw extruder as well as parallel twin-screw extruder is our specialty. We have a special material developed after intensive testing for manufacturing conical & parallel twin barrels, which are normally divided into three pieces in conical barrel set & two pieces in parallel twin barrel set.Following mechanical processing each barrel section is treated using a hardening process which operate almost free of distortion. This has enabled production of twin barrel with approximately twice to thrice the service life of nitrided barrels at just 20% to 25 % addition cost. This renders the economic efficiency factor irrelevant in purchasing decisions.An additional benefit is the extended service like of twin screw extruders with wear resistant barrels can be operated at normal output for a longer period, without incurring through put losses due to wear. Thus production costs are reduced while competitiveness is improved.

Tips On Polishing Wire Nails 1. Load the polishing barrel with Wire Nails up to a level 3 to 4 inches above the half filled level. (If nails are rusty, ad half a litere of Kerosene before adding saw dust and run the Barrel for about 10 minutes with blind lid fixed) Add saw dust in the barrel the upto 80% of the full level. Fix the blind lid and run the barrel for about 40 minutes. Stop the barrel and change the lid from blind to perforrated. Run the barrel for about 45 minutes with perofrrated lid in order to remove the saw dust. This will result in bright & shiny nails. 2. If the mirror finished is required on the Nails, it is advisable to use SOFT LEATHER PIECES in second sequences of polishing instead of Saw Dust 20 to 25 Kgs. Of such LEATHER PIECES are required for our 250 Kgs. Cap. Polishing Barrel. These LEATHER PIECES can be applied again for about 15 to 20 cycles till they become very oily.

Polishing Barrel - Made of 3 mm M.S. Sheet. - Fitted with reduction gearbox to control speed

Portable barrels for electroplating industry we are manfacturer of electroplating barrels in chennai .portable barrel full polypropylene material barrel running of dc motor with dc control box.

Horizontal Barrels are obtainable in wood, steel or in rubber lined steel. The rotation of the barrel ensures good mixing of the components and media, resulting n quality polishing and finishing.

We are remarkable entity, engaged in offering superior quality Open Oil Barrels & Grease .Being a well-distinguished company in the market, we are into offering Castrol Oil Barrel & Grease . Features: Seamless finish Excellent durability Leakage proof Specification and use: Material: Steel Highly demanded for packaging Usage: Pharmaceutical, food industries