Boring Pump Dealers (133 products available)

Our Stainless Steel Bore Well Submersible Pumps are equipped with an advanced electric motor. These pumps are ideal for general submersible water applications such as able to drain infiltrating water, cellars to reservoirs, clean or slightly dirty water and for garden irrigation.

Boring pump Electrical Grade Silicon Steel Sheet with 3.9 to 4.5 Watt losshourt ROTOR SHAFT : Stainless Steel 420 H&T IMPELLER : Graded Cast Iron and Dynamically Balanced, BALL BEARING : Reputed Make ZZ Ball Bearing.

A domestic Boring pump is a device which has a hermetically sealed motor close-coupled to the pump body. The whole assembly is submerged in the water in deep well ranging from 200 feet depth to 1200 feet to pump the water to surface.

Flow rate:upto 11660 m3h Head: upto 225 m Motor power: 2.2 to 2000 kW Outlet diameter of pump 80-800mm Working temperature < 105 ° C Solid grain < 80 mgL The pumps are non-self-priming, centrifugal volute pumps with radial inlet and radial outlet ports and horizontal shaft. The rotating assembly is dynamically balanced. Impellers are hydraulically balanced.

• Head range: 10.2 - 405 m

The motor portion is a squirrel cage wet type water cooled induction motor with stainless steel stator shell to prevent rust formation. Specially designed thrust bearing is provided for long life. Available in 3, 4, 5, 6 and 8 inch sizes.

Applications   Domestic & Community Water Supply Bore well applications in agriculture and irrigation Drip and Sprinkler Irrigation Housing Complex, Bungalows High Raise Buildings  

• Number Of Stages: Multi Stage Pump
• Type: Borewell
• Motor Phase: Three Phase
• Head: 51 to 100 m
• Maximum Discharge Flow: 1001 - 5000 LPM
• Motor Horsepower: 5 - 20 HP
• Brand: Ambal/Metro
• Usage/Application: Agri
• Model Name/Number: AMPS/22

• Supply Voltage: Single Ph 220V + 10% -15%
• Speed: 2820 rpm
• Maxi. Permissible sand in wate: 25 g / m3 (max)
• Pumping liquid: Clear cold fresh water
• Hardness of water: 300 (max)
• Water temperature: 33 C

ALTUS 100mm ( 4”) Bore well Submersible pump sets offer trouble free operation lifting water to new heights from new depths. The pumps are manufactured under exacting quality control measures to offer longer life and higher efficiency. The computerized design allows varied voltage operation.   The ALTUS Submersible pumps are ideally suited for Industrial and residential use, Multi storeyed buildings, Agriculture and Horticulture farms and Public water supply systems. 

Submersible pumps for 6” Bore Well 3 HP to 25 HP Three Phase. Submersible pumps for 4” Bore Well 0.5 HP to 3.0 HP Single Phase and 3 HP to 7.5 HP Three Phase. Specification:- Our product ranges from 0.5 H.P to 3 H.P. suitable for 4” , 6” bore hole having a total head upto 500 metres and with a discharge upto 1400 LPM. For 8” bore holes and above we have motors upto 40 H.P. with a total head upto 500 metres and discharge upto 3300 LPM.

• Power: 3hp to 7.5hp (5.5kw)
• Motor: 140mm dia motor 3 hp to 7.5hp Three phase 415 Volts
• Head Range: up to 407 meters Pumps 100mm (4”) submersible pump
• Head: up to 407 meters (1330 feet)
• Discharge: up 540 LPM

Bore well COMBO submersible pump for 6” (150mm) bore well. Applicable for deep bore wells ( 500 to 1330 feet) with low water yield. When  Compared to a regular  6”(150mm) bore well pumps , for a 1000 feet depth, HP  required for a 6” bore well pump is  minimum12.5hp( minimum water   discharge is 110 LPM). But when the yield in the bore well is less than 70 LPM, this combo pump requires only 5 hp   FEATURES: Pump designed and constructed with casing tube and with tie bolt to arrest whirling effect and thus increase the life of the pump. With low power, high head is achieved. 3hp -235 meters , 5hp-370 mts, 6hp-407 meters. Thus suitable for low yielding bore wells . Existing V6 motors can be used . Standardized spares engineered to perfection makes this pump a world class pump APPLICATIONS: For pumping water from deep bore wells A regular 6” Bore well motor can be used as prime mover A low discharge 6” pump of 5hp can be used max up to a depth of 450 feet. But this combo pump of 5hp can used for a depth of 1300 feet. Thus savings in cost and power Existing 6” motor can be used with this pump

4” Submersible pumps have a sturdy and robust design that ensure an improved and consistent performance, improved life of the pump, energy efficiency and power savings, and spare parts which are easily interchangeable.   Applications includes: Residential Buildings Drip and Sprinkler Irrigation Irrigation of Small Fields Gardens and Orchards Industrial Use Hotels Fire Fighting Pressure Boosting'   Instructions: 1) A use of a reliable and good quality starter along with earth leakage circuit breaker of less than 100 ma rating is compulsory. 2) Proper Earthing is to be provided 3) A non-return valve (NRV must be fitted nearest to the pump to avoid damage due to water hammer. 4) The product shown may differ from actual supply in view of continuous change in design and specifications Technical Specifications: In order to help you appropriately select the right product, we request you to kindly refer to the discharge chart, which is designed to guide you on the basis of the head and discharge of water you would require. Please feel free to contact us for further details and help in selecting the product.

• Horse Power: 5 HP
• Brand Name: PUREAIR
• Model Name/Number: BWCP
• Is It Portable: No
• Power Source: AC Three Phase
• Cooling Method: Air Cooled

We are the largest manufacturers, exporters, and suppliers of Bore Water Pumps from New Delhi, India. The Bore Water Pumps is extensively used for drawing water from those deep bore wells which has diameter over 4 inches. We are well-known in the market to offer Bore Water Pumps that are uniquely designed, light-weight, light-duty, and easy to handle. Our team of professionals designs the Bore Water Pumps to meet the varied industry requirements, and strictly uses high-grade raw materials. The Bore Water Pumps are also combined with premium quality motors in order to ascertain an efficient performance. The Bore Water Pumps can be availed at highly affordable rates in the market.   Sample Availability : yesSupplier Product Code : 47

• Number Of Stages: Multi Stage Pump
• Type: Borewell
• Motor Phase: Three Phase
• Warranty: 12 months
• Country of Origin: Made in India
• Motor Horsepower: 150 HP
• Brand: LUBI
• Usage/Application: water

• Adopter: Cast Iron
• Stage Casing: Cast Iron
• Impeller: SS 410
• Pump Shaft: SS 410
• NRV: Cast Iron
• Sleeve: SS 410
• Bearing Bush: Nitrile Rubber / LTB – 4
• Couple: SS 410
• Strainer: SS 202
• Fasteners: SS 410 / SS 202
• Upper Housing / Connecting Piece: Cast Iron
• Lower Housing: Cast Iron
• Motor Base: Cast Iron
• Rotor Shaft: SS 410 / SS 420
• Stator Tube: SS 202
• Thrust Bearing: SS 420
• Revolving plate: Carbon / Teflon
• Diaphragm: Nitrile Rubber
• Oil Seal: Nitrile Rubber & SS
• Fasteners: SS 410 / SS 202

These compressor pumps are excellent for domestic,industrial and agricultural purposes to lift water from bore wells RMP-The first Small Scale Industry to get ISI recognition for their compressor Pumps. RMP ,the first and foremost manufacturer of compressor pumps, has won a distinctive as a leading manufacturer of compressor pumps and the superior quality and matchless performance of RMP compressor pumps are appreciated by each and every customer. Used mainly for domestic, industrial and agricultural purposes, these high performance pumps draw water easily from greater depths where most of the other pumps prove failures and, if you hesitate to take our word for it, just spare a few minutes to see how an RMP pump work and you will start trusting it like nothing else.

• Number Of Stages: Multi Stage Pump
• Type: Borewell
• Motor Phase: Three Phase
• Head: 28.8 m
• Voltage: 400 V
• Material: Stainless Steel
• Power: 7.5 HP
• Brand: Toshio
• Model Name/Number: JSB 5-75
• Max Discharge: 1110 LPM
• Free Passage: 45 mm

Boring pump run with maximum efficiency that satisfy the need of every customer in various ranges of applications. SharpPower Water Pumps has recorded a remarkable growth with commitment towards value creation for its customers and stress on Research & Development.

• Brand Name: Texmo
• Type: Borewell
• Voltage: 220 V
• Material: Stainless Steel
• Country of Origin: Made in India
• Motor Horsepower: 5 HP
• Usage/Application: Pumping water
• Motor Phase: Single Phase
• Power Source: AC Powered
• Warranty: 12 months
• Frequency: 50 Hz

• Phase: Single
• Head in Meter: 4 to 113
• Discharge in LPM: 15 to 85
• H.P.: 0.5 to 1.5
• Stage: 6 to 25

V-3 3" Bore well Submersible Water Filled Pump sets with S.S. Body suitable for 78 mm Bore Dia in Single Phase - 220 Volts - 50 Hz   Our provided submersible pump is precisely designed to be utilized in 3 inch dia wells or larger. In sync with the quality standards, the offered pump is manufactured using quality approved basic material and high-end technology. Provided submersible pump is highly acclaimed by our esteemed clients, owing to its various quality features and cost-effectiveness.Features:  Rigid construction Easy maintenance Corrosion resistance

• Type: Submersible Pumps
• Application: Industrial
• Color: MUlticolor
• Voltage: 110V, 220V, 380V, 440V
• Fuel: Electric
• Automatic Grade: Automatic, Fully Automatic, Manual, Semi Automatic
• Power: 1-3kw, 3-5kw, 5-7kw, 7-9kw
• Pressure: High Pressure, Low Pressure, Medium Pressure
• Warrenty: 1 Year, 2 Years
• Motor Horse Power: 5 - 20 HP, 20 - 140 HP, 1 - 3 HP

Pumps in Mixed Flow Option only Motor Size is limited to 200 mm Maximum Outer Diameter is 186 mm All Motors Water Filled; in Three Phase Application Motor Power ranges from 45.00 HP through 100.00 HP Motors of capacity 45.00 HP through 100.00 HP are with Star-Delta Start Coupling is over key-way Arrangement Thrust Bearing is made up of Carbon+SS

Salient Features Motor Motor construction in integral locking method for easy servicing Copper rotor for better connectivity International NEMA standard spline coupling to enable inter-changeability Carbon thrust bearing for less friction and better efficiency even at low voltage field conditions Reinforced motor design to withstand wide voltage fluctuations Pump To ensure pump stability and perfect alignment, an additional protection is provided in the pump portion Sand guard provision in both lower and upper portion of the pump SS insert in all noryl diffusers for wear & tear resistance even in sandy bore wells NRV to avoid water hammering effect to the pump Application Domestic and Minor Irrigation Residential Complexes and high rise Buildings Drip and Sprinkler Irrigation Fountains and Special

A Latteys Brand Bore well submersible pump is vertical multistage centrifugal pump closely coupled to an oil filled and cooled vertical ac single/three phase induction motor.A Latteys Brand Bore well submersible pumps are manufactured as per IS: 8034 Standard. As this unit is completely submerged in water, cavitation is totally avoided.     Feature :   Dynamically balanced rotor Totally enclosed,Oil filled, squirrel cage induction motor Food graded non conducted power oil CSR starting method for AC supply Stainless steel stator body Corrosion and abrasion resistant parts are made of stainless steel, high strength   engineering polymers and special alloy materials   Better slim design – Better Efficiency – Low power consumption Light weight – Ease in installation Silent running Reliable in operation     Applications :   Irrigation and Drip Irrigation Sprinkler, Gardening, Nursery and Bungalows High rise buildings & complexes Industrial water supply schemes Swimming pool, hospitals

• Type: Submersible Well Pump
• Application: Industrial
• Color: MUlticolor
• Voltage: 110V, 220V, 380V, 440V
• Fuel: Electric
• Automatic Grade: Automatic, Fully Automatic, Manual, Semi Automatic
• Power: 1-3kw, 3-5kw, 5-7kw, 7-9kw, 9-12kw
• Pressure: High Pressure, Low Pressure, Medium Pressure
• Warrenty: 1 Year, 2 Years

• Material: Cast Iron, SS
• Diameter: 40-80 mm
• Motor Power: 0.5-60 HP, 0.31-45 KW
• Deep well ranging from: 200 feet depth to 1200 feet

• Light weight and easy to install: Stainless steel pump shell for corrosion resistance and LTB bushes for high wear resistance and longer life
• Improved hydraulic design with increased efficiency and reduced power consumption: Built in NRV with minimum friction
• Noise free operations.: Easily rewindable Squirrel-cage motor of water-cooled, designedfor 200 – 240 V, 50 Hz, AC power supply
• Modular construction and easily interchangeable parts: High quality water-resistant polymer insulated wires for longer life even under adverse voltage conditions
• Available in radial flow impeller design in shell type assembly: Pressure diaphragm to compensate excess pressure due to heating up of filled water
• Impellers and diffusers of high quality engineering polymer:  

• Type: Borewell
• Motor Phase: Three Phase
• Brand: Akash

Applications Domestic & Community Water Supply Bore well applications in agriculture and irrigation Drip and Sprinkler Irrigation Housing Complex, Bungalows High Raise Buildings