Bunched Cables Dealers

Ariel Bunched Cables, 1100 volt Grade, are used for distributing power to individual consumers by utility service providers like electricity Boards, electricity distributing authorities. The cable is kept supported on poles. The line is tapped intermittently from any required position which enables to be used in urban as well as rural areas alike. Phase or lighting conductor: Hard drawn Aluminium H2 or H4 grade as per IS:8130. Messenger conductor : Aluminium Silica and Magnesium Alloy used after treatment as per IS: 398 (part 4).

Aerial Bunched Cables are used for distributing to individual consumers by utility service providers like Electricity Boards, electricity distributing authorities. The cable is kept supported on poles.

We are manufacturers of LT AB Cables of size upto 3 x 95 + 16 + 70 sq. mm. We are approved with PGCIL for DDUGJY & IPDS Schemes.

Unistar Aerial Bunched Cables (ABC) are manufactured to IS 14255, IS 7098 Part II or tailor made to customer requirements. These cables are best choice for power distribution in congested urban areas. Aerial Bunched Cables are preferred for higher safety reliability lower power losses and ultimate system economy because of low installation, maintenance and operative costs.

LT Aerial Bunched cables, also known as LT AB Cables, are distinct from bare conductor overhead distribution. They are good for distribution of electricity to residential, commercial and industrial units. These cables have overcome limitations of PVC insulated cables such as thermal degradation, poor moisture resistance and thermoplastic nature. LT AB cables have higher current rating, higher short circuit rating approximately 1.2 times that of PVC. LT AB Cables have lower cost of laying because of comparatively smaller diameter of cable and higher weight. Installation charges are also low as diameter of the cable is comparatively lesser with smaller bending radius, requiring less space. For longer cable length voltage drop, one size lower cables can be used as compared to PVC insulated cable.   LT AB CABLE - FEATURES AB cables are highly reliable and insulation has been developed to withstand extreme cold and intense sunlight. Disturbance and faults occur five to ten times more often in open wires lines than in AB cable lines. There is no risk in touching the live cable and the insulation reduces the number of short circuits and over voltage faults in overhead cables during thunderstorms. Few hardware accessories are needed which are different for different size of cables. Streets can be lit only at little extra conductor for lighting. The cable can be supplied with one or two insulated conductors for street lighting. Convenient Usage In electricity theft prone areas. As replacement of bare lines in rural area & narrow street with limited space. As replacement of bare lines where reliabilities of support is of prime importance. In hilly terrain here cost of erection of overhead lines or under ground cable becomes very high. As reinforcement of existing system with increase in voltage/current carrying capacity. For temporary supplies. Advantages In comparison with bare overhead distribution line AB Cable has very high reliability in maintaining power services because power and neutral conductors are insulated with the best dielectric, resulting in the following advantages: Less fault rate on account of good protection against line and ground faults by high winding falling trees or birds specially in hilly areas and forests. High insulation resistance to earth in all seasons. Neglible lekage currents and low losses. Multiplexer circuits of power and telephone cables could be in the same set of poles. Better adaptability to laid besides with existing overhead bare conductor system without any interference. High capacitance and low inductance leading to low impedance of lines. Lower voltage drop, higher current carrying capacities vis-à-vis better voltage regulations. Longer spans and longer distance lines are possible with better system stability. AB cables are much safer than bare conductors. It can be laid in dense vegetation and forest areas. Additional connections can be easily and quickly made with hot line connectors. Overall lines cost is reduced. Maintenance is very convenient. Very difficult to tap the AB cables, thus reducing theft which leads to lower distribution losess. Since, the tension from the current carrying conductor is totally removed by introduction of messenger wire, the operating temperature of the conductor is 90 c as against 75 c thereby allowing AB cable to carry current equivalent to that of bare conductor of the same size. LT AB CABLE - COMMON SIZES 2C x 10 Sq mm 2C x 16 Sq mm 2C x 25 Sq mm (3C x 50 Sq mm) + (1C x 55 Sq mm) + (1C x 25 Sq mm) (3C x 70 Sq mm) + (1C x 55 Sq mm) + (1C x 25 Sq mm) (3C x 95 Sq mm) + (1C x 55 Sq mm) + (1C x 25 Sq mm) 4 x 10 Sq mm 4 x 16 Sq mm 4 x 25 Sq mm  

Unistar Aerial Bunched Cables (ABC) are manufactured to IS 14255, IS 7098 Part II or tailor made to customer requirements. These cables are best choice for power distribution in congested urban areas. Aerial Bunched Cables are preferred for higher safety reliability lower power losses and ultimate system economy because of low installation, maintenance and operative costs.

Bunched copper cables that we offer are required in diverse industrial segments. excellent quality and higher durability are the features for which bunched copper cables are demanded throughout the market. We test bunched copper cables on various parameters such as resistance, quality, safety and working life. After this, our bunched copper cables are delivered to the clients. highlights quality-testedsturdy constructiondurableaffordable prices.

Bunched cables of the penultimate users with our commitment for Quality and Value. These are converted into process specifications based on Indian & International Standards.

Gemini Aerial Bunched Cables (ABC) is a very novel concept for Over Head power distribution.As replacement of bare lines in Rural areas, in woods and in other localities & narrow streets where the space is limited.High Insulation resistance to earth in all seasons and polluted atmospheres. Negligible leakage currents and low losses.

While the Insulation Piercing Connector (IPC) is used for connecting an insulated connector with a branch connector without removing the insulation, the Fuse Switch Dis-connector is intended for use in ABC Cabling systems as an overhead protection device.

Aerial bunched cables (ABC) are a very novel concept for Over Head Power distribution, when compared to the conventional bare conductor over head distribution system. Insulated aerial bunched cables provide higher safety and reliability, lower power losses and ultimate system economy by reducing installation, maintenance and operative cost. We stand among the predominant bunched cables manufacturers, in India. This system is ideal for rural distribution and especially attractive for installation in difficult terrains such as hilly areas, forest areas, coastal areas etc. Aerial Bunched Cables are also considered to be the best choice for power distribution congested urban areas with narrow lanes and by - lanes. In developing urban complex, Aerial Bunched Cables are the better choice because of flexibility for rerouting as demanded by changes in urban development plan. Construction of ABC XLPEIHDPE insulated power conductors of Aluminum (Neutral conductor and street lighting conductor if and when necessary) are laid together (twisted) around a high tensile standard and galvanized steel (Aluminum Alloy may be used) insulated or bare messenger wire to form the Aerial Bunched Cable. This assembly is directly strung on to distribution pole/towers by means of standard hardware available in the market but care shall be taken to render the messenger wire completely insulated from earthing at any point of distribution in case of HT ABC. The XLPE (Cross-linked Polyethylene) insulation is black in color and is stabilized against deterioration caused by exposure to direct sunlight and ultraviolet radiation. XLPE is cross-linkable low-density polyethylene, which is made thermo set by special formulation from base polymer of thermoplastic low-density polyethylene. XLPE combines the best electrical properties of LDPE and superior thermo mechanical properties. Materials Aluminum conductors conform to IS: 8130 (Class-II). Standard high tensile galvanized steel messenger wire conforms to IS: 398 (Part-2). Alternatively Aluminum Alloy messenger wire conforms to IS:398 (Part-4) XLPE and HDPE insulation of power conductors specify IS: 7098 (Part - I & II) and IS: 6474 respectively. Since, the tension from the current carrying conductor is totally removed by- introduction of messenger wire the operating temperature of the conductor is 90 [] C as against 75 [] C of the bare conductor of the same size. Stringing No difficulty is envisaged during stringing of Aerial Bunched Cables in the conventional method but care shall be taken that insulated conductors do not get damaged during installation. Dragging the ABC on the ground is avoided. Tension to be applied during stringing shall be 25% of the breaking load of the messenger wires. This will allow line to have sag within specified limit of 1.5% of the span at the lowest ambient temperature. Jointing While mid-span jointing permissible for LT ABC system by conventional technique, our recommendation will be to draw the line in such a way as to bring the joints at the supports. Mid span joining is not at all recommended in the case of HT lines our recommendation is for outdoor type HV terminations only. Under unavoidable circumstances, line tapping at the support points may be allowed through suitably designed clamp connectors/ PG clamps. The semi conducting screen continuity shall be maintained at all joints as far as possible to avoid fluctuations during system disturbances. The 3-phase screens may be shorted and earthed through suitable non-liner surge arrestor. Attempting to make a tap off from power conductors in region where cetenary is under tension in not recommended. Applicaton Aerial Bunched Cables can be conveniently used: As replacement of bare lines in Rural Areas, in woods and in other localities & narrows streets where the space limited. As replacement of bare lines where reliability of supply is prime importance. As replacement of bare lines where high degree of stability of supply voltage is of importance. In hilly terrains where cost of erection of overhead lines or under ground cable becomes very high. As reinforcement of existing system without increasing voltage. For temporary supplies. Advantages In comparison to bare overhead power distribution lines, ABC has very high reliability in maintaining services because power and neutral conductors are insulated with the best dielectric medium resulting in the following advantages: Less fault rate on account of good protection against line and ground fault by high winds or falling trees or birds especially in hilly areas & forests as encountered in rural distribution networks. High insulation resistance to earth in all seasons and polluted atmospheres. Negligible leakage currents and low losses. Multiple circuits of Power and Telephone cables could be strung in the same set of poles or any other supports like walls etc. Better adaptability to run concurrently with existing overhead bare conductor system without any interference. High capacitance and low inductance leading to low impedance of lines. Lower voltage drop, higher current capacities. VIs-A-VIS Better Voltage Regulation. Longer spans and longer distance lines are possible with better system stability. ABC cables are much safer then bare Conductors. It can be over hung in dense vegetation and forests. Additional connections can be easily and quickly made with hot-line connectors. Maintenance is very easy. Total lines costs are reduced.

We are known amidst the prominent LT Aerial Bunched Cables Manufacturers and Suppliers in the industry. Made available for various applications, the LT Aerial Bunch Cables are manufactured to provide complete safety and high efficiency in operations. Manufactured to meet the Indian standards with perfection, our LT Aerial Bunch Cables are highly durable in nature. Features : Accurate dimensionCorrosion resistantExcellent insulationOffer lower power lossesCost-effective installation and maintenance Standard : As per IS specn. no.: 14255/1995 Suitable For : Hilly areasRural areasNarrow streetsAny area requiring supply of bare lines

We are widely trusted brand in industry involved in manufacturing, trading and exporting a premium range of LT Aerial Bunched Cables. Safest system because phase conductors are insulated, no risk or danger of accidental touching live conductor. Supply interruptions minimized thus the life of Transformers increased. Available in cost-effective rates.

Insulated Conductors for overhead Lines,Low Tension Power Cables (XLPEPVC),High Tension Power Cables (XLPEPVC),Aerial Bunched Cables,Telecommunication Cables,

We are offering lt aerial bunched cables. with the growing need for long term economy, safety and reliablity overhead conductors are now being replaced by aerial bunched cables both in l.t. & h.t. Distribution network with limited space for clearance. Aerial bunched cables are basically a compromise between power cables and overhead conductors. aluminum conductor xlpe insulation aluminum (lightning) conductor mesenger the basic construction is as follows: 3 power cores consisting of standard aluminium conductors, insulated with xlpe insulation. one shealth lighting aluminium conductor with xlpe insulation (optional). one messenger al-alloy conductor (base or insulated).

Aerial Bunched Cable (ABC) is a very innovative concept for overhead power distribution as compared to the conventional bare conductor overhead distribution system. It is being designed, manufactured & tested conforming to IS: 14255 & other international specifications. It provides higher level of safety and reliability, lower power losses and ultimate system economy by reducing installation, maintenance and operative cost. This system is ideal for rural distribution and it is especially perfect for installation in difficult terrains such as hilly areas, forest areas, coastal areas etc. ABC is also considered to be ideal for power distribution in congested urban areas with narrow lanes and by-lanes. In developing urban complex, ABC is the first choice because of its flexibility for re-routing as demanded by changes in urban development plan.These Cables are knows as XLPE insulated Aerial Bunched Cables. These Cables Consists of 1 to 3 Nos. XLPE (Cross Linked Polyethylene insulated phase Aluminum Conductor Cable Twisted around one no. Messenger conductor made from Aluminum Alloy and may be bare or insulated. These cables are now being used in LT Distribution Lines to avoid theft of electricity.

We are acclaimed as one of the most trustworthy Aerial Bunched Cables Manufacturers, Exporters, and Suppliers from India. Our Aerial Bunched Cables are widely demanded in the market owing to their features of like durability, unmatched quality and cost effectiveness. We manufacture the Aerial Bunched Cables using specially formulated Polyolefin compound by the process of irradiation. Features : High flexibility High strength Lower power lossEasy installationProvides higher safetyEasy to maintain Long functional life Applications : Replacement of bare lines Hilly terrains Temporary supplies

We are a prominent Aerial Bunched Cables Manufacturer, Supplier and Exporter from India. Our Aerial Bunched Cables are made from fine grade material and are extensively used for distributing power to various individual consumers. Clients can avail Aerial Bunched Cables at market leading rated with us. Salient Features Safe operationsReliable performanceLow power lossLow maintenance costLong functional life

Our Aerial Bunched Cables are perfect for installation in theft prone areas and have been acknowledged as the safest systems because of the high degree of insulation of phase conductors. The cables are characterized by high capacitance and low inductance which eventually leads to low power losses during transmission. Our Aerial Bunched Cables ensure minimal supply interruptions and cost lesser than Power Cables.

Aerial Bunched Cables (ABC) is a very novel concept for Over Head power distribution. Aerial Bunched Cables that we supply are being designed, manufactured & tested conforming to IS: 14255, IS: 7098 (P-2) & other international specifications. Applications In theft prone areasAs replacement of bare lines in Rural areas, in woods and in other localities & narrow streets where the space is limitedAs replacement of bare lines where reliability of supply is of prime importance.As replacement of bare lines where high degree of stability of supply voltage is of importanceIn hilly terrains where cost of erection of overhead lines or underground cable becomes very highAs reinforcement of existing system without increasing voltageFor temporary supplies

LPEHDPE insulated power conductors of Aluminium (Neutral conductor and street lighting conductor if and when necessary) are laid together (twisted) around a high tensile standard and galvanized steel (Aluminium Alloy may be used) insulated or bare messenger wire to form the Aerial Bunched Cable. This assembly is directly strung on to distribution poletowers by means of standard hardware available in the market but care shall be taken to render the messenger wire completely insulated from Earthing at any point of distribution in case of HT ABC.

Aerial Bunched Cable (ABC) is a very novel concept for overhead Power distribution. ABC provides higher safety and reliability compared to bare conductor overhead distribution system. The other advanctages are lower power losses and system economy by reducing installation, maintenance and operation cost. This system is ideal for rural distribution and specially suitable in difficult terrains like hilly areas, forest and coastal areas etc. ABC is also considered as a better choice for power distribution in densely populated areas where laying of underground cable is either difficult or extremely expensive. This is attributed by narrow lanes and by-lanes of congested urban areas. Needless to mention that ABC is a better choice due to the flexibility of re-routing demand, should there be any changes in urban development plan. Application Easier Installation particularly in congested, forest or Hilly areas. Saving in cost of Poles, Insulators, cross-arms etc. Human Safety in case of accidental contacts. Water proof system, no corrosion.Syatem reliability hence customer satisfaction. Reduced clearance.

Construction of abc xlpe/hdpe insulated power conductors of aluminium (neutral conductor and street lighting conductor if and when necessary) are laid together (twisted) around a high tensile standard and galvanized steel (aluminium alloy may be used) insulated or bare messenger wire to form the aerial bunched cable. This assembly is directly strung on to distribution pole/towers by means of standard hardware available in the market but care shall be taken to render the messenger wire completely insulated from earthing at any point of distribution in case of ht abc. the xlpe (cross-linked polyethylene) insulation is black in colour and is stabilized against deterioration caused by exposure to direct sunlight and ultraviolet radiation. Xlpe is cross-linkable low-density polyethylene, which is made thermo set by special formulation from base polymer of thermoplastic low-density polyethylene. Xlpe combines the best electrical properties of ldpe and superior thermo mechanical properties. materials aluminium conductors conform to is:8130(class-ii)standard high tensile galvanized steel messenger wire conforms to is:398 (part – 2). Alternatively aluminum alloy messenger wire conforms to is:398 (part – 4)xlpe and hdpe insulation of power conductors specify is:7098 (part – I & ii) and is:6474 respectively. since, the tension from the current carrying conductor is totally removed by introduction of messenger wire the operating temperature of the conductor is 90 c as against 75 c of the bare conductor of the same size. stringing: no difficulty is envisaged during stringing of aerial bunched cables in the conventional method but care shall be taken that insulated conductors do not get damaged during installation. Dragging the abc on the ground is to be avoided. Tension to be applied during stringing shall be 25% of the breaking load of the messenger wires. This will allow line to have sag within specified limit of 1.5% of the span at the lowest ambient temperature. jointing: while mid-span jointing permissible for lt abc system by conventional technique, our recommendation will be to draw the line in such a way as to bring the joints at the supports. Mid - span joining is not at all recommended in the case of ht lines our recommendation is for outdoor type hv terminations only. Under unavoidable circumstances, line tapping at the support points may be allowed through suitably designed clamp connectors /pg clamps. The semi conducting screen continuity shall be maintained at all joints as far as possible to avoid fluctuations during system disturbances. The 3-phase screens may be shorted and earthed through suitable non-liner surge arrestor. Attempting to make a tap off from power conductors in the region where catenary is under tension in not recommended. application: aerial bunched cables can be conveniently used:as replacement of bare lines in rural areas, in woods and in other localities & narrows streets where the space limited.as replacement of bare lines where reliability of supply is of prime importance.as replacement of bare lines where high degree of stability of supply voltage is of importance.in hilly terrains where cost of erection of overhead lines or under ground cable becomes very high.as reinforcement of existing system without increasing voltage.for temporary supplies. advantages: in comparison to bare overhead power distribution lines, abc has very high reliability in maintaining services because power and neutral conductors are insulated with the best dielectric medium, resulting in the following advantages: less fault rate on account of good protection against line and ground fault by high winds or falling trees or birds especially in hilly areas & forests as encountered in rural distribution networks.high insulation resistance to earth in all seasons and polluted atmospheres. Negligible leakage currents and low losses.multiple circuits of power and telephone cables could be strung in the same set of poles or any other supports like walls etc.better adaptability to run concurrently with existing overhead bare conductor system without any interference.high capacitance and low inductance leading to low impedance of lines.lower voltage drop, higher current capacities. Vis-à-vis better voltage regulation.longer spans and longer distance lines are possible with better system stability.abc cables are much safer than bare conductors.it can be over hung in dense vegetation and forests.additional connections can be easily and quickly made with hot – line connectors.total lines costs are reduced.maintenance is very easy. quality setup conductors are generally the only means to transport current or signal with required safety norms. Therefore the material of its construction, purity and other important aspects of metallurgy are the critical factors to source the wire rods. We have latest 3 – d profile die checking and refurbishment system. The sourcing of wire drawing, lubricant in form company like houghton italy and intensive testing conductor to ensure quality. at capcab india, we do; qa in planning: customer requirements, along with the orders are taken into quality planning with due care for designing, manufacturing, testing and performance aspects. qa in planning: the raw materials are produced from the best sources from the domestic and global market. These sources are selected on the based on the company’s stringent quality vendor evaluation/continuous assessment and testing. testing each consignment of conductor & wire is exhaustively tested before dispatch clearance, by highly qualified, experienced and dedicated testing team. the testing setup is broadly classified as follows:r.m. Testing labs.routine testing for conductor, lt wires & cables.type testing labs include fr/fs/frls testing.all the laboratories are equipped with the modern testing instruments. All the instruments are under strict calibration and environment control. qa in planning the company has online computerized control system on all its critical processes and a team of online testing engineers to ensure the consistency in quality.

We are into offering high grade range of aerial bunched cables, which is manufactured in conformation to national as well as international standards. Aerial bunched cables offered by us, cater to the requirement of various difficult terrains due to their special features. You can avail aerial bunched cables in varied dimensions and at most competitive prices. salient features : good protection against linehigh insulation resistance to earth in all climatic conditionshigh capacitance and low inductancelower voltage drop and higher current carrying capacitieslow maintenance cost suitable to be installed in difficult terrains such as : hilly areasforest areascoastal areas specifications : phase conductor(aluminium)street lighting conductor(aluminium)messenger conductor(aluminium alloy)nom. Cross sectional area(mm2)max. D.c. Resistance temp. 20oc(ωkm)nom. Thickness of insulation xlpepe(mm)nom. Cross sectional area (mm2)max. D.c. Resistance temp. 20o c(ω km)nom. Thickness of insulation xlpepe(mm)nom. Cross sectional area (mm2)max. D.c. Resistance temp. 20o c(ωkm)minimum breaking load(kn)161.911.2161.911.2251.387251.201.2161.911.2251.387350.8681.2161.911.2251.387500.6411.5161.911.2350.9869.8700.4431.5161.911.2500.68914950.3201.5161.911.2700.49219.7

We are one of the promising Aerial Bunched Cables Manufacturers. The Aerial Bunched Cables (ABC) that we deal in are required for electrical transmission system or a telecommunication line, which is suspended between utility poles or electricity pylons. Aerial Bunched Cables provide safety and reliability compared to other cables.

We are situated in Modasa(India) and have established a fine network with the help of which we ensure timely delivery. Superior transportation facilities, efficient workforce and on-time delivery of the products make us stand out from the crowd.