Busbar Sleeve Dealers

• Material: PP
• Thickness: 5-10mm

• Material: PVC
• Color: Black, Blue, Brown, Green, Grey, Red, Yellow, Customised
• Condition: New
• Country of Origin: India
• Glossy finish: Excellent Insulation
• All Standard Colours: All Sizes
• Upto 90 Dig C: Customised Thickness
• Suitable sizes for every Busbar: Customised Thickness

PVC Heat Shrink Sleeves for Insulation of Low Tension Busbars. With their high electrical insulation and ultimate glossy finish. Our HSS used to Insulate “Bus Bars and Conductors” which provides excellent insulation with a High Dielectric Strength & a Good Retention of Dielectric Strength. Standard Colors Available : Red, Yellow, Blue & Black. Other Colours on Demand : Green, Grey & White. Suitable for Busbar size from 6 X 6 mm upto 200 x 12 mm. PVC Heat Shrink Sleeve Size from 17mm upto 230mm

available in all sizes and colours very high quality approved by various panel builders stands upto 250 degrees very high quality and eco series available l- type, hexagonal type, fr material also there 20mm, 25 mm are available pin type, minus type, triangle type, square type  3 point locks with rods available.

• Type: Busbar Sleeve
• Material: Pvc Plastic
• Thickness: 150 Microns
• Color: Black, Blue, Green, Red
• Finishing: Shinny
• Country of Origin: India
• Thickness: 150 Microns
• Size: 20mm to 360mm
• Pack type: Roll

Supported by an efficient team, we manufacture a qualitative range of PVC Busbar Heat Shrinkable Sleeves. Our range gives perfect insulation performance to supply enquired flashover protection for the bus bar system. These are available in various colors such as blue, red, yellow and black. Features: These sleeves avoid short circuit fault caused by animals such as mice, snakes and others Heat shrinkable bus bar insulation sleeves avoid accidental injure to repair persons when they enter electriferous clearance by mistakes Help to prevent bus bar from chemical corrosion effected by strong acid, alkali and salt Solve the problem of insulating among bus bars in bus duct It has a breakdown voltage of 11 KVA Our range is available from 30 mm to 230 mm Lay Flat width in 170 microns

• Material: Rubber
• Color: Black
• Use: Home, Industrial
• Packaging Type: PP Packets

Bus Bar Insulation Heat Shrinkable Tubing are medium and heavy wall heat shrinkable tubing for protection and insulation of bus bar against accidents caused by electrified bare bus bar.Features/Benefits: Reduce bus bar clearance requirements Give designers more freedom in designing switchgear cabinets when space premium Protects against short circuit and electrical leakage caused small animals Protects against short circuit and electrical leakage caused small animals Projects against corrosion, dirt and other contaminants that may cause accidental flashover Available in continuous length roll form for conventional and economical installation Technical specifications: Protects against accidental flashover up to 72.5kV Voltage Class 1kV-72.5kV Ideal for high and low voltage bus bar insulation Halogen Free(Optional) Flame Resistant with Oxygen index higher than 27 (optional) Applications: Bus Bar Insulation and protection In switchgear cabinets where space is limited and air spacing between bus bars need to be kept at minimal

• Type: Flexible
• Material: Rubber
• Shape: Round
• Thickness: 5-10mm
• Color: Brown
• Application: Electrical

busbar sleeve Heat shirinkable sleeves, tapes, HT & LT TAPES, busbar patti tapes, copper & GI flat tapes etc..

Bus Tube is heat shrinkable tube designed to insulate busbar systems up to 36KV & to protect against accidental flashover. The tubes are manufactured from high quality non tracking crosslinked polyolefin material.

The term Heat Shrinkable is applied to extruded or moulded polymeric materials, which are cross linked either by irradiation, or by chemical means, such that when their temperature is raised beyond the normal base polymer crystalline melting point, they do not melt but merely become rubbery. In this state, if the material is then mechanically expanded and held in this position until the temperature falls below the crystalline melting point. It remains in the expanded state. Subsequent heating in an unconstraint state will then result in the material recovering or shrinking to its original extruded or moulded size and shape" The Electricity Association. To maintain the continuity of the underground cables the need for the reliable jointing systems came into existence. Cable terminations and joints have always been very critical part in the whole distribution system involving underground cables and have often been the causes of failure in the distribution system as well. There has always been a need to improve the reliability of the underground distribution system through newer materials that can withstand stringent operating conditions and installed without a room for errors. We are dealers of Steinel Heat tools & Heat Guns suitable for Heat Shrinkable Cable Accessories, Heat shrink Power cable Accessories, Heat Shrinkable Cable Jointing System, Heat Shrink Accessories etc. There are wide range of cable jointing systems available today, which can be classified by the way they are applied such as taped type, pre-moulded / push-on / slip-on type, cold application type and heat shrinkable type. The selection criterion for an appropriate type of cable jointing system by the user should be dependent on the site conditions, operating parameters, voltage applications and cable types. Steinel offers the HL 1400 S Hot Air Gun and a variety of hand held hot air blowers used for the shrinking of busbar and switchgear sleeves.

• Color: Red,Blue,Yellow, Black & Green or Any Custom Color
• Sizes: 25 mm to 230 mm

Busbar shrink sleeves are extensively used in control panel boards, switch-gears, distribution boards and other electrical applications. Busbar shrink sleeves offers excellent electrical insulation, mechanical strength, chemical resistance and heat dissipation properties. Hind polymers busbar shrink sleeves are designed for insulating copper, brass and aluminium busbars (rectangular, square and round). We supply busbar shrink sleeves in various sizes and different colors which not only helps in protecting the busbars but also helps in easy identification.

• Thickness: ± 0.02 mm.up to 0.2 mm., ± 0.05 mm above 0.25 mm
• Width: ± 1 mm
• Break down Voltage: 11 kv
• Machine Direction: 10% ± 5%
• Transverse Direction: 45% ± 5%
• Shrink Temperature: 120°C
• Standard Length: 50 / 100 meters
• Shelf Life: 6 months, stored below 25°C.

We are counted among the well-reputed firm for offering an extensive series of Bus Bar Grade Heat Shrink Sleeve to our esteemed customers. Furthermore, we offer this product at nominal prices. Maxwell Bus Bar Grade Heat Shrink Sleeve provides the perfect electrical insulation for Bus bars of low tension systems in control panels & switchgear systems. Bus bar sleeves are an excellent latest modern technology for insulation compared to age old conventional method.used for Electrical industry. Our Product is ROHS Compliance and available from 17 mm width to 230 mm width and in thickness ranging from 80 microns to 400 microns for the complete range of Bus Bar Sleeve which covers the variations as required by local & export requirements. Standard available Colours are Red, Yellow, Blue, Black & Green, we can also supply brown, gray & white colour Bus bar sleeve to fulfill various requirements.    FEATURES : Strong structure Easy to use Durability Affordable costs Standard Length (Roll) : 100 / 200 meters  Standard Colours : Opaque : Black, Red, Blue, Yellow etc. Transparent : Blue, Yellow, Red, Green & Clear etc.  

• Material: Polymer
• Thickness: 2 mm (After Shrinkage)
• Type: Flexible, Elastomers
• Color: Red
• Tensile Strength: 14 MPa
• Internal Diameter: 15-180 mm (Before Shrinkage)
• Rated Voltage: 1-35 kV

• Material: PVC
• Color: Any
• Packaging type: Carton Box
• Usage/Application: Insulation
• Temperature Tolerance: 100 Degree

These products provides perfect insulation performance and protection for the bus bar system. The range of these products are manufactured using supreme quality raw material procured from the trusted vendors of the market. We have highly skilled and experienced professionals who manufacture these products as per the industry set quality standard. These products are available to the clients in various colors such as red, blue, yellow and black. We customize our range as per the requirements of the clients. Features: Durable Tensile strength Fine finish Highly efficien

The 3M heat shrinkable bus bar insulation tubing range is suitable for round and rectangular bus bars for upto 52 kV applications. The tube is made of a special formulated heat shrinkable cross linked polyolefin based material providing excellent electrical insulation property for both indoor and outdoor environments. The tubing’s which is of Reddish brown colour, has excellent electrical insulation, high resistance to splitting, good moisture resistance and excellent track resistance properties. The tubing shrinks upon application of heat from temperature of 120 – 150 deg C using gas torch in the field and in oven for large scale production, or heating in electric oven. The tubing provides insulation and protection against flash over and accidentally induced discharge. It provides adequate insulation in the places where space is constraint.   Application   The use of 3M ATX tube provides protection of live bus bar from phase to phase to and phase to ground failures. By using ATX tubing’s, equipment can be designed by reducing air spacing between bus bars. This will help in reduction of the switch gears equipment.

• Material: PVC
• Color: Red Black Yellow Blue Green White
• Country of Origin: Made in India
• Packaging Type: Roll
• Packaging Size: 50 Meter
• Pattern: Plain

We are well reckoned in the global market as one of the prime 33Kv Bus Bar Sleeves Suppliers. Our Tyco (USA) Busbar Sleeve is developed keeping the issue of safety foremost. The Heat Shrink Busbar Sleeve is apt for covering exposed bus bars in pillars and cabinets. Our 113366kv bus bar sleeves considerably reduce the threat of electrocution. Surge arrestors and HT sleeves provide these tubes continuous length and with the feature of high flexibility, which assures trouble free bending without the fear of cracking.

• Type: Busbar Sleeve
• Material: HDPE
• Feature: Eco Friendly, Fine Quality

Out Heat Shrinkable Tubes are designed to insulate busbar systems up to 36KV & to protect against accidental flashover. The tubes are manufactured from high quality non tracking crosslinked polyolefin material. Meets ANSI C37.20.2 standards for MV switchgear application up to 36 KV.

• Length: 100 meters.

Sleeve is being sued by leading switchgear manufacturers for insulation of Busbar for Low Tension Switchgears. Suitable for Busbars of 25mm to 200mm width and 6mm to 12.5mm thickness. The sleeve width from 17mm to 250mm. With standing voltage of 11kV & breakdown voltage of 15kv. Thickness 0.2mm.

Bus Bar Heat Shrink Sleeves, Magnetic Core Drilling Machine, Braided Sleeve

Ht Busbar Sleeves, Cable Tray, Motor Starters, Substation Commissioning

Bus Bar Heat Shrinkable Sleeves, Conical Type Insulator, Panel Lock

We are well reckoned in the global market as one of the prime 33Kv Bus Bar Sleeves Suppliers. Our Tyco (USA) Busbar Sleeve is developed keeping the issue of safety foremost. The Heat Shrink Busbar Sleeve is apt for covering exposed bus bars in pillars and cabinets. Our 11/33/66kv bus bar sleeves considerably reduce the threat of electrocution. Surge arrestors and HT sleeves provide these tubes continuous length and with the feature of high flexibility, which assures trouble free bending without the fear of cracking.